Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a hydraulic oil for hydraulic controls, consisting of a blend of biodegradable natural oils, refined with an exclusive method, free from mineral oil, formulated with additives against wear, oxidation, rust and foam and metal passivators. It is characterized by an exceptional lubricating power, which reduces the coefficient of friction between the moving mechanical parts of bearings, gears, bushings and kinematisms in general, and therefore the mechanical wear of pumps, valves, etc. It is "Zinc free", i.e. free of Ashes ("ashless"). Its use does not produce harmful effects on metals and standard elastomers already compatible with mineral oil. It does not require special precautions for its handling, as it is not classified as hazardous to health and does not have exposure limits (TLV: Threshold limit value). Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with mineral-based hydraulic oils. It possesses a very high viscosity index of its own (i.e. without the addition of specific additives), which permits its use within vast ambient thermal intervals of operation, remaining constant over time. Presents: -A very low natural pour point; -Exceptional protection against wear, corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a hydraulic oil for hydraulic controls, consisting of a blend of biodegradable natural oils, refined with an exclusive method, free from mineral oil, formulated with additives against wear, oxidation, rust and foam and metal passivators. It is characterized by an exceptional lubricating power, which reduces the coefficient of friction between the moving mechanical parts of bearings, gears, bushings and kinematisms in general, and therefore the mechanical wear of pumps, valves, etc. It is "Zinc free", i.e. free of Ashes ("Ashless It is a flame resistant oil, "self-extinguishing", formulated to reduce the potential fire hazard. Its use does not produce harmful effects on metals and standard elastomers already compatible with mineral oil. It does not require special precautions for its handling, as it is not classified as hazardous to health and does not have exposure limits (TLV: Threshold limit value). Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with mineral-based hydraulic oils. It possesses a very high viscosity index of its own (i.e. without the addition of specific additives), which permits its use within vast ambient thermal intervals of operation, remaining constant over time. Presents: - A natural low-slip point; - Exceptional protection against wear, corrosion, rust, foam; - Compatibility-mixability in all percentages with lubricants of mineral origin.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a hydraulic oil for hydraulic controls, consisting of a blend of biodegradable natural oils, refined with exclusive method, free from mineral oil, formulated with additives against wear, oxidation, rust and foam and metal passivators. It is characterized by an exceptional lubricating power, which reduces the coefficient of friction between the moving mechanical parts of bearings, gears, bushings and kinematics in general, and therefore the mechanical wear of pumps, valves, etc. It is "Zinc free", ie free from ashes ("ashless"). It is a flame-resistant, "self-extinguishing" oil, formulated to reduce the potential risk of fire. Its use does not produce harmful effects on metals and standard elastomers already compatible with mineral oil. It does not require special precautions for its handling, as it is not classified as dangerous for health and does not have exposure limits (TLV: threshold limit value). The vapors that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with mineral based hydraulic oils. It has a very high Viscosity Index, which allows it to be used within vast thermal operating intervals, remaining constant over time. Presented by: - a natural low point of flow; - exceptional protection against wear, corrosion, rust and foam; - compatibility-mixability in all percentages with mineral lubricants.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a hydraulic oil for hydraulic controls, consisting of a blend of biodegradable natural oils, refined with an exclusive method, free from mineral oil, formulated with additives against wear, oxidation, rust and foam and metal passivators. It is a flame resistant oil, "self-extinguishing", formulated to reduce the potential fire hazard. It presents in particular an excellent resistance to thermal and oxidative decay, obtained by means of a combination of unique and synerloptic additives, specifically studied and tested, which make it qualitatively superior to hydraulic oils and Even mineral-based, very widespread and of a good quality level, normally present on the market. It is characterized by an exceptional lubricating power, which reduces the coefficient of friction between the moving mechanical parts of bearings, gears, bushings and kinematisms in general, and therefore the mechanical wear of pumps, valves, etc. It is "Zinc free", i.e. free of Ashes ("Ashless"). Its use does not produce harmful effects on metals and standard elastomers already compatible with mineral oil. It does not require special precautions for its handling, as it is not classified as hazardous to health and does not have exposure limits (TLV: Threshold limit value). Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with mineral-based hydraulic oils. It possesses a very high viscosity index, which permits its use within vast ambient thermal intervals of operation, remaining constant over time. Presents: -A very low natural sliding point; -Exceptional protection against wear, corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

Hydrosint 46 is a synthetic organic ester of high quality (CEE designation: THI, Forms D), anhydrous, characterised by excellent flame resistance with self-extinguishing properties, which reduces the possibility of fire triggering by Hot or melted metals, overheating of mechanical parts, sparks, etc. It has a high resistance to oxidation and thermal-oxidative decay. It is equipped with lubricating properties comparable to an excellent oil-free, zinc-resistant mineral water. It possesses a very high index of natural viscosity which permits its use within extensive operating thermal systems. Its low density facilitates the purification in centrifuge and extraction from the systems of treatment of waste water. It's biodegradable. Its use does not produce damaging effects on metals and elastomers that are already compatible with mineral oils. It has strong anti-wear, Antifoam, anticorrosive, Antirust, Demulsive and "Air release" properties. It does not require handling precautions higher than those normally adopted for mineral oils. Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with THI fluids of other nature.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

Hydrosint 68 is a synthetic organic ester of high quality (CEE designation: THI, Forms D), anhydrous, characterised by excellent flame resistance with self-extinguishing properties, which reduces the possibility of fire triggering by Hot or melted metals, overheating of mechanical parts, sparks, etc. It has a high resistance to oxidation and thermal-oxidative decay. It is equipped with lubricating properties comparable to an excellent oil-free, zinc-resistant mineral water. It possesses a very high index of natural viscosity which permits its use within extensive operating thermal systems. Its low density facilitates the purification in centrifuge and extraction from the systems of treatment of waste water. It's biodegradable. Its use does not produce damaging effects on metals and elastomers that are already compatible with mineral oils. It has strong anti-wear, Antifoam, anticorrosive, Antirust, Demulsive and "Air release" properties. It does not require handling precautions higher than those normally adopted for mineral oils. Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with THI fluids of other nature.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is an ashless, zinc-free, fully synthetic, biodegradable, high viscosity index lubricant, for hydraulic systems and for the lubrication of guides with hydrostatic systems. It is formulated with particular saturated synthetic esters and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It guarantees: - a high Viscosity Index with high mechanical strength typical of the synthetic base used, without the addition of improving additives, for a constant performance for long periods even in severe operating conditions; - high thermal-oxidative resistance thanks to the use of specific and exclusive additives; - a very low natural pour point; - a strong and marked chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-mixability in all percentages with mineral origin lubricants; - compatibility with all metals and their alloys used in normal machinery **. **Note: Around 90 ° C there can be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; however, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is an ashless lubricant, zinc-free, totally synthetic, biodegradable, with a high viscosity index, for hydraulic systems and for the lubrication of guides with hydrostatic systems. It is formulated with special saturated synthetic esters and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It guarantees: -an elevated viscosity index of high mechanical strength of the synthetic base used, without addition of additives, for a consistent performance for long periods even in harsh conditions of operation; -High thermal-oxidative resistance thanks to the use of specific and exclusive additives; -A very low natural sliding point; -strong chemical stability even at high temperatures; -Exceptional protection against wear, corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin; -Compatibility with all metals and their alloys used in normal machinery * *. Note: Around 90 ° C it is possible to have a moderate attack of the copper and its alloys, like the bronze, with relative blackening of the surfaces; However, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally small extent compared to mineral oil. It is compatible with the best quality elastomers commonly found on the market such as: -fluorurated rubber (e.g. Viton); -PTFE (e.g. Teflon); -Butadiene Rubber acrylamnitrile (High nitrile): NBR-HNBR; -Fluorosiliconic rubber; -Silicone rubber or other rubbers, however, compatible with saturated synthetic esters.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a fully synthetic, biodegradable lubricant, extremely fluid, with a high viscosity index, for circulation systems. It is formulated with particular saturated synthetic esters and with a careful package of ashless additives against wear, oxidation, rust and foam. Features: - a high viscosity index with high mechanical resistance, typical of the synthetic base used in the product, without improving additives, for consistent performance over long periods even under harsh operating conditions; - a very low natural pour point; - a strong and distinct chemical stability even at high temperatures; - an exceptional protection against wear, corrosion, rust and foam; - compatibility-mixability in all percentages with mineral oils; - compatibility with all metals and their alloys used in conventional machines**. **Note: At around 90°C you can have a moderate effect on Copper and its alloys, such as Brass, with relative blackening of the surfaces; however, it is established that that Copper and its alloys act as powerful catalysts in the oxidative process and thermal decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a totally synthetic, biodegradable, very fluid lubricant, with a high viscosity index, for hydraulic systems. It is formulated with special saturated synthetic esters and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It guarantees: -a high viscosity index of high mechanical strength of the synthetic base used, without addition of additives, for a consistent performance for long periods even in harsh conditions of operation; -A very low natural sliding point; -strong chemical stability even at high temperatures; -Exceptional protection against wear, corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin; -Compatibility with all metals and their alloys used in normal Machinery * *. * * Note: Around 90 ° C it is possible to have a moderate attack of the copper and its alloys, like the bronze, with relative blackening of the surfaces; However, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally small extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a fully synthetic, biodegradable lubricant with a high Viscosity Index, for hydraulic systems. It is formulated with particular saturated synthetic esters and with an accurate package of additives without ashes against wear, oxidation, rust and foam. It guarantees: - a high viscosity index with high mechanical strength of the synthetic base used, without the addition of improver additives, for a constant performance for long periods even in heavy operating conditions; - a very low natural pour point; - a strong and strong chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-mixability in all percentages with lubricants of mineral origin; - compatibility with all metals and their alloys used in normal machines **. **Note: Around 90 ° C there can be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; however, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

This is a fully synthetic, biodegradable chain lubricant with a high Viscosity Index for hydraulic systems and guideway lubrication of hydrostatic systems. It is formulated with special synthetic esters and saturated with an accurate package of ashless additives against wear, rust, oxidation and foam. It guarantees: - a high viscosity index with high mechanical resistance of a synthetic base used, without any enhancing additives, for consistent performance over long periods even under harsh operating conditions; - a very low natural pour point; - a strong and distinct chemical stability even at high temperatures; - an exceptional protection against wear, corrosion, rust, and foam; - compatibility-mixability in all percentages with mineral oils; - compatibility with all metals and their alloys used in conventional machines** - it is compatible with the highest quality elastomers commonly available on the market such as: - fluorinated rubber (Viton); - PTFE (for example Teflon); - Acrylonitrile butadiene rubber (high nitrile): NBR – HNBR; - fluorosilicone rubber; - silicone rubber, or other rubbers howsoever compatible with saturated synthetic esters. ** Note: At around 90° C it can have a moderate effect on copper and its alloys, such as brass, with the related surface blackening; however, it is established that copper and its alloys can act as powerful catalysts in the oxidative processes and thermal decay of oil in operation, but to an exceptionally small extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

This is a fully synthetic, biodegradable chain lubricant with a high Viscosity Index for hydraulic systems. It is formulated with special synthetic esters and saturated with an accurate package of ashless additives against wear, rust, oxidation and foam. It guarantees: - a high viscosity index with high mechanical resistance of a synthetic base used, without any enhancing additives, for consistent performance over long periods even under harsh operating conditions; - a very low natural pour point; - a strong and distinct chemical stability even at high temperatures; - an exceptional protection against wear, corrosion, rust, and foam; - compatibility-mixability in all percentages with mineral oils; - compatibility with all metals and their alloys used in conventional machines** - it is compatible with the highest quality elastomers commonly available on the market such as: - fluorinated rubber (Viton); - PTFE (for example Teflon); - Acrylonitrile butadiene rubber (high nitrile): NBR – HNBR; - fluorosilicone rubber; - silicone rubber, or other rubbers howsoever compatible with saturated synthetic esters. ** Note: At around 90° C it can have a moderate effect on copper and its alloys, such as brass, with the related surface blackening; however, it is established that copper and its alloys can act as powerful catalysts in the oxidative processes and thermal decay of oil in operation, but to an exceptionally small extent compared to mineral oil

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a totally synthetic, biodegradable, high viscosity index lubricant, for hydraulic systems and for the lubrication of guides with hydrostatic systems. It is formulated with particular saturated synthetic esters and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It is a flame resistant, "self-extinguishing" oil, formulated to reduce the potential risk of fire. It ensures: - a high viscosity index with high mechanical strength typical of the synthetic base used, without the addition of improving additives, for a constant performance for long periods even in harsh operating conditions; - a very low natural pour point; - a strong and marked chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-mixability in all percentages with mineral origin lubricants; - compatibility with all metals and their alloys used in normal machinery **. **Note: Around 90 ° C there can be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; however, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a fully synthetic, biodegradable, high viscosity index lubricant for hydraulic systems and for the lubrication of guides with hydrostatic systems. It is formulated with special saturated synthetic esters and with a careful package of ashless additives against wear, oxidation, rust and foam. It is a flame resistant, "self extinguishing" oil formulated to reduce the potential risk of fire. It ensures: - a high viscosity index with high mechanical resistance typical of the synthetic base used, without the addition of improving additives, for a constant performance for long periods even in severe operating conditions; - a very low natural pour point; - a strong and marked chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-mixability in all percentages with lubricants of mineral origin; - compatibility with all metals and their alloys used in normal machinery **. It is compatible with the best quality elastomers commonly found on the market such as: - fluorinated rubber (for example Viton); - PTFE (for example Teflon); - acrylonitrile butadiene rubber (high nitrile): NBR-HNBR; - fluorosilicone rubber; - silicon rubber, or other rubbers however compatible with saturated synthetic esters. **Note: Around 90 ° C there may be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; it is however established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a totally synthetic, biodegradable, high viscosity index lubricant for hydraulic systems. It is formulated with special saturated synthetic esters and with a careful package of ashless additives against wear, oxidation, rust and foam. It ensures: - a high viscosity index with high mechanical resistance typical of the synthetic base used, without the addition of improver additives, for a constant performance for long periods even in severe operating conditions; - a very low natural pour point; - a strong and marked chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-miscibility in all percentages with lubricants of mineral origin; - compatibility with all metals and their alloys used in normal machinery ** **Note: Around 90 ° C there may be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; however, it is established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.