Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a special fluid with lubricating properties, consisting of an exclusive mixture of hydrocarbons derived from synthesis processes, with a high degree of purity, blended with fatty acids and synthetic esters, which form a very low viscosity oily liquid, clear, very light hay-colored, and with a very mild odor.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

X-DRAW V 62-1 PLUS is a latest-generation evaporative solvent-based lubricant, specifically designed for the demanding requirements of forming and stamping aluminium fins and copper tubes used for the production of finned packs for heat exchangers (HVAC). Its balanced formulation ensures maximum lubricating performance, providing excellent tool protection and a stable stamping process even at high speeds. The product is particularly suitable when the finished parts undergo subsequent high-temperature treatments (brazing, heat treatment, etc.), as it does not leave carbonaceous residues, discoloration or staining. The product is characterised by: -High process cleanliness, leaving minimal residues after evaporation -Fast and complete evaporation, reducing waiting times before subsequent stages (e.g. brazing, assembly) -Neutral or almost imperceptible odour, ideal for enclosed or poorly ventilated work areas -Effective control of formicary corrosion, thanks to dedicated inhibitors that significantly reduce the formation of acetates and formates, known to attack metals in HVAC environments -Compatibility with aluminium and copper, even under severe deformation conditions -Synthetic lubricity additives for excellent surface finish of the worked part and extended life of dies and punches. The formulation is free from chlorinated components and heavy aromatic compounds, in compliance with the latest environmental and occupational safety regulations.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

X-DRAW V 62-2 PLUS is a latest-generation evaporative solvent-based lubricant, specifically designed for the demanding requirements of forming and stamping aluminium fins and copper tubes used for the production of finned packs for heat exchangers (HVAC). Its balanced formulation ensures maximum lubricating performance, providing excellent tool protection and a stable stamping process even at high speeds. The product is particularly suitable when the finished parts undergo subsequent high-temperature treatments (brazing, heat treatment, etc.), as it does not leave carbonaceous residues, discoloration or staining. The product is characterised by: -High process cleanliness, leaving minimal residues after evaporation -Fast and complete evaporation, reducing waiting times before subsequent stages (e.g. brazing, assembly) -Neutral or almost imperceptible odour, ideal for enclosed or poorly ventilated work areas -Effective control of formicary corrosion, thanks to dedicated inhibitors that significantly reduce the formation of acetates and formates, known to attack metals in HVAC environments -Compatibility with aluminium and copper, even under severe deformation conditions -Synthetic lubricity additives for excellent surface finish of the worked part and extended life of dies and punches. The formulation is free from chlorinated components and heavy aromatic compounds, in compliance with the latest environmental and occupational safety regulations.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

X-DRAW V 4201 P is a special fluid for stamping and blanking ferrous materials. It’s particularly suitable for heavy medium operations of blanking and deep drawing, when you want to get clean parts. This product is made from fluid synthetic base, evaporative, with moderate odor and blending with anti-welding additives. These combine between them a synergic action that make the product assuring: - Excellent release agent and anti-welding power; - Brightness of the surface parts; - durability of moulds and punches; - Low od.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and cutting ferrous materials, aluminum, copper and the respective alloys, particularly suitable for medium-heavy cutting and deep-drawing processes, when particularly clean pieces are to be obtained. It is obtained from a fluid, vanishing synthetic base with a very moderate odor, mixed with anti-welding additives based on: - synthetic greasing agents; - anticorrosives; - antioxidants. These perform a synergistic action between them that allows you to obtain a product with the following features: - excellent detaching-anti-welding power; - shining surfaces; - durability of the molds and punches; - low odors.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is an oil designed for drawing and blanking operations on ferrous materials, indicated for medium and heavy-duty blanking and deep drawing processes, whenever the intention is to obtain particularly clean pieces. It is made from a higly selected and hydrogenated fluid mineral base, quickly evaporable, of moderate odour and mixed with additives composed of: - Synthetic lubricant part; - friction modifiers; - anti-corrosive and anti-oxidant; - phosphorated compunds. These elements are characterized by great synergy among each others, which makes it possible for the product to guarantee: - Excellent release and anti-welding power; - shiny surfaces; - durability of the moulds and of the pieces; - light odour; - hygenic and sanitary compatibility. After the evaporation of the volatile component, the product leaves on the machined piece an oily film almost unnoticeable and stable over times.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping, blanking and specially like calibration fluid for ferrous materials, particularly suitable for medium-heavy blanking and calibration operations, when particularly clean pieces are to be obtained. It is obtained from a fluid mineral base, vanishing, highly selected and hydrogenated, with a very moderate odor, mixed with additives: - synthetic greasing agents; - friction modifiers; - anticorrosives and antioxidants; - phosphorus compounds. These perform a synergistic action between them that allows you to obtain the following features: - excellent detaching-anti-welding power; - shiny surfaces; - durability of the molds and punches; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an ultra thin oily film on the pieces, almost imperceptible and stable over time, which has a protective action.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for moulding and shearing of ferrous materials, particularly suitable for cutting and medium-light stamping, when you want to obtain particularly clean pieces. It is obtained from a fluid mineral base, strongly evaporable, highly selected and hydrogenated, of very moderate odour, in mixture with additives consisting of: -untuosants of natural and synthetic origin; -friction modifiers; -anticorrosive and antioxidant. These include a synergical action that allows to obtain a product that guarantees: -an Excellent release-anti-invasive power; -surface gloss; -duration of Moulds and punches; -low odors; -hygienic-sanicompatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for molding and blanking of ferrous materials, aluminum, copper and their respective alloys, particularly suitable for blanking and drawing of medium severity, when you want to obtain extremely clean pieces. It is obtained from a fluid, evaporable synthetic base with a very moderate odor, mixed with anti-soldering additives based on: - synthetic lubricants; - anticorrosive; - antioxidants. These perform a synergistic action between themselves that allows for a product that ensures: - excellent detaching-antisoldering power; - surface gloss in the absence of residues; -life of molds and punches; - low odors.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for drawing and blanking processes of ferrous materials, aluminum, copper and their respective alloys and especially suitable for medium-duty, blanking and deep drawing processes, whenever the aim is to obtain particularly clean pieces. It is made from a fluid, vanishing, synthetic base, in mixture with the following components: - greasing agents - anti-corrosive additives - anti-oxidant additives These exert among each others a strong synergistic action which allows the product to guarantee: - excellent release and anti-welding properties - shiny surfaces and absence of residues - greater life of the moulds and punches - low odours

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is an evaporable fluid to be used for stamping and shearing of aluminium foil, particularly suitable for cutting and lightly drawing machining, when you want to obtain particularly clean parts. It is obtained from a highly selected and hydrogenated evaporable fluid mineral base and is equipped with an excellent release-anti-releasing power. Guarantees: -surface gloss; -duration of Moulds and punches; -low odors; -a high coefficient of distribution of the oil on the sheet metal, for an optimization of the consumption in the ratio g/cm ² and a simultaneous improvement of the surface quality of the machined sheets; -excellent hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

Description It is a fluid designed for drawing and blanking processes on ferrous materials, aluminium, copper and their alloys; it is suitable for medium-duty operations of cutting and drawing, whenever the aim is to obtain particularly clean pieces. It is made from a synthetic and vanishing fluid base, of moderate odour and mixed with anti-slip additives consisting of: - Synthetic components; - Anti-oxidant additives; - Anti-corrosive additives. These elements exert among each others a great synergic action, which allows the product to guarantee: - Excellent demoulding performance; - Shiny surfaces; - Increased lifetime of the moulds and of the dies; - Low odours.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and blanking on ferrous materials, Aluminium, Copper and alloys, particularly suitable for medium gravity cutting and drawing, when you want to have clean pieces. It is made from a synthetic fluid base, evaporable, of very moderate odour, in mixture with anti-slip additives based on: - synthetic components; - anti-corrosive additives; - anti-oxidant additives. These include a synergical action that allows to obtain a product that guarantees: - excellent desmoulding performance; - shiny surfaces; - increased lifetime of mould and dies; - low smell.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for blanking and light deep drawing machining, in order to obtain particularly clean pieces. It is made from a highly selected and hydrogenated vanishing, fluid mineral base, characterized by a very moderate odour and mixed with additives consisting of: - synthetic greasing agents - friction modifiers - anti-corrosive and anti-oxidant agents These components exert a synergistic action among each others, which gives the product the following properties: - excellent lubro-detaching and anti-welding power - shiny surfaces - higher durability of the moulds and punches - high-quality surface finishes of the machined pieces - light odour - hygienic-sanitary compatibility The product is particularly suitable in case of subsequent high-heat treatments on the finished pieces (braze welding, heat treatments, etc…), as it does not leave residues, burnishings or stains on the metal surface. After the evaporation of the volatile component, the product leaves an ultra-thin and oily film on the machined pieces, almost invisible and stable over time, which exerts a protective action.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a vanishing lubricant, formulated for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for heavy-duty blanking and deep drawing processes, in order to obtain particularly clean pieces. It is made from a highly-selected and hydrogenated fluid, vanishing, mineral base, in mixture with the following additives: - greasing agents - friction modifiers - anti-corrosive and anti-oxidant Those exert a synergistic action among each others, which allows the product to guarantee: - excellent release and anti-welding power - great anti-rust protection - shiny surfaces - great surface finishes of the machined pieces - moderate odour - hygienic-sanitary compatibility After the evaporation of the volatile component, the product leaves on the pieces an ultra-thin, invisible oily film, which exerts a protective action, stable over time.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It’s a drawing and blanking vanishing fluid for ferrous and non-ferrous materials. It’s particularly suitable for heavy-medium blanking and drawing operations to obtain cleaner pieces. The product has a mineral base, fluid, evaporable, high selected and hydrogenated, with low odor and mixed with additives: - Synthetic greasing agents; - Friction modifiers; - Antirust and antioxidant. All these additives make a synergic action that allows: - Excellent detaching and anti-welding power; - Highly rust protection; - Surfaces’ shine; - Molds and punches long life; - Low odors; - Hygienic-sanitary compatibility. After the evaporation, the product leaves a thin and stable oily film over the treated pieces, during time. The oily film creates also a protective action for the pieces.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for blanking and medium-light deep drawing machining, in order to obtain particularly clean pieces. It is made from a highly selected and hydrogenated vanishing, fluid mineral base, characterized by a very moderate odour and mixed with additives consisting of: - synthetic greasing agents - friction modifiers - anti-corrosive and anti-oxidant agents These components exert a synergistic action among each other which gives the product the following properties: - excellent lubro-detaching and anti-welding power - shiny surfaces - higher durability of the moulds - light odours - hygienic-sanitary compatibility After the evaporation of the volatile component, the product leaves an ultra-thin, oily film on the machined pieces, almost invisible and stable over time, which exerts a protective action. The product is perfectly compatible with any treatment following the machining phase.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a vanishing fluid for light drawing and blanking processes of ferrous and non-ferrous materials, when the aim is to obtain particularly clean pieces. It is made from a highly-selected, vanishing mineral base, mixed with additives consisting of: - synthetic greasing agents; - friction modifiers; - anti-corrosives and anti-oxidant; It guarantees: - excellent lubro-detaching and anti-welding power; - shiny surfaces; - extended life of the moulds; - excellent surface finishes of the machined pieces; - low odours; - hygienic-sanitary compatibility. The product is particularly suitable in case of successive treatments of the finished pieces (braze-soldering, heat treatment, etc.), as it does not leave neither residues nor burnishings or stains. After the evaporation of the volatile component, the product leaves a thin oil-based film on the pieces, almost invisible and stable over time, which exerts a protective action.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and blanking ferrous materials, particularly suitable for medium-heavy blanking and deep drawing operations, when particularly clean pieces are to be obtained. It is obtained from a fluid mineral base, vanishing, highly selected and hydrogenated, with a very moderate odor, mixed with additives: - synthetic greasing agents; - friction modifiers; - anticorrosives and antioxidants; - phosphorus compounds. These perform a synergistic action between them that allows you to obtain the following features: - excellent detaching-anti-welding power; - shiny surfaces; - durability of the molds and punches; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an ultra thin oily film on the pieces, almost imperceptible and stable over time, which has a protective action.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and blanking of ferrous materials, particularly suitable for light blanking and drawing operations, when you want to obtain particularly clean pieces. It is obtained from a fluid, evaporable, highly selected and hydrogenated mineral base, with a very moderate odor, mixed with additives consisting of: - greasing agents of natural origin; - friction modifiers; - anti-corrosion and antioxidants. These exert a synergic action between them which allows to obtain a product which guarantees: - excellent release-anti-welding power; - surface shine; - life of molds and pieces; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an almost imperceptible oily film on the piece, stable over time.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant designed for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for blanking and medium-light deep drawing machining, in order to obtain particularly clean pieces. It is made from a highly selected and hydrogenated, vanishing, fluid mineral base, characterized by very moderate odour and mixed with additives consisting of: -natural and synthetic greasing agents -friction modifiers -anti-corrosive and anti-oxidant agents These components exert a strong synergistic action among each others, which gives the product the following properties: -excellent lubro-detaching and anti-welding power -shiny surfaces -high durability of the moulds and punches -light odours -hygienic-sanitary compatibility

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

t is an evaporable fluid to be used for stamping and shearing of Aluminum sheets, particularly suitable for blanking, light drawing when you want to obtain particularly clean pieces. It is obtained from a highly selected evaporable and hydrogenated fluid mineral base. The product has: - an excellent release anti-welding power; - surface gloss; - duration of the molds and pieces; - low odors; - a high coefficient of oil distribution on the plate, for optimization of consumption in the g/cm² ratio and for simultaneous improvement of the surface quality of the plates work; - excellent hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant, formulated for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for heavy-duty blanking and deep drawing processes, in order to obtain particularly clean pieces. It is made from a highly-selected and hydrogenated fluid, vanishing, mineral base, in mixture with the following additives: - greasing agents - friction modifiers - anti-corrosive and anti-oxidant Those exert a synergistic action among each others, which allows the product to guarantee: - excellent release and anti-welding power - shiny surfaces - higher lifetime of the moulds and punches - great surface finishes of the machined pieces - moderate odour - hygienic-sanitary compatibility The product is particularly suitable in the event of subsequent heat treatments on the machined pieces, such as: welding, soldering, heat treatings, etc., as it does not leave residues, burnishings or stains. After the evaporation of the volatile component, the product leaves on the pieces an ultra-thin, invisible oily film, which exerts a protective action, stable over time.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant for drawing and blanking processes of ferrous and non-ferrous materials, especially designed for blanking and medium and heavy-duty drawing processes whenever the aim is to obtain particularly clean pieces. It is made from a highly selected and hydrogenated vanishing mineral fluid, of very moderate odour mixed with additives, constituted by: -Synthetic components; -Friction modifiers; -Anti-corrosive and anti-oxidants. -Specific EP additives for drawing and blanking processes These exert among each others a synergic action, which allows the product to guarantee: -Excellent anti-welding and release power; -Excellent resistance to residues formations; -Shiny surfaces; -Greater lifetime of the moulds and pieces; -Light odour; -Hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and cutting of ferrous and non-ferrous materials, particularly suitable for deep stamping thanks to the excellent EP power as well as for medium-light stamping and drawing processes, when particularly clean pieces are to be obtained. It is obtained from a fluid, evaporable, highly selected and hydrogenated mineral base, with a very moderate odor, mixed with additives consisting of: - natural and synthetic greases; - specific EP additives to increase cutting and deformation power; - friction modifiers; - anticorrosives and antioxidants. These perform a synergic action between them that allows to obtain a product that guarantees: - excellent release-anti-welding power; - excellent resistance to the formation of residues; - surface gloss; - duration of molds and punches; - low odors; - hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for molding and blanking of ferrous and non-ferrous materials, particularly suitable for blanking and light drawing, when you want to obtain particularly clean pieces. It is obtained from a highly selected and hydrogenated fluid, evaporable mineral base, with a very moderate odor, mixed with additives consisting of: -synthetic greasing agents; - friction modifiers; -anti-corrosives and antioxidants. These perform a synergistic action between themselves that allows for a product that ensures: - excellent detaching-antisoldering power; - surface gloss; -life of the molds; - excellent finishing of the edges of the machined pieces; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an ultra-thin oily film on the pieces, almost imperceptible and stable over time, which exerts a protective action. X-DRAW V 6230 is perfectly compatible with all treatments following the processing phase.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for drawing and blanking of ferrous and non-ferrous metals, containing chloroparaffins, particularly suitable for blanking and drawing, even very heavy, when you want to obtain particularly clean pieces. It is obtained from a highly selected and hydrogenated fluid, evaporable, highly selected and hydrogenated mineral base with a very moderate odor, mixed with additives consisting of: - synthetic lubricants; - friction modifiers; - EP and chloroparaffin polymeric additives with high anti-welding and stability properties. These perform a synergistic action between themselves that allows for a product that ensures: - an excellent detaching-antisoldering power; - excellent resistance to the formation of residues; - surface gloss; - duration of molds and pieces; - low odors; - hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a vanishing fluid formulated for drawing and blanking processes on ferrous materials and specifically designed for blanking and light deep drawing, whenever the aim is to obtain particularly clean pieces. It is obtained from a fluid, vanishing and higly selected and hydrogenated hydrocarbon base, of moderate odour and mixed with additives consisting of: - Lubricant part of synthetic origin; - Friction modifiers; - Anti-corrosive and anti-oxidant. These elements exert among each others a great synergic action, which allows the product to guarantee: - Excellent release and anti-welding power; - Shiny surfaces; - Increased lifetime of the moulds and of the pieces; - Low odours. - Hygenic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and blanking ferrous materials, particularly suitable for blanking and medium-heavy drawing operations, when particularly clean pieces are to be obtained. It is obtained from a fluid mineral base, vanishing, highly selected and hydrogenated, with a very moderate odor, mixed with additives consisting of: - synthetic greasing agents; - friction modifiers; - anticorrosives and antioxidants; - phosphorus compounds. These perform a synergistic action between them that allows you to obtain the following features: - excellent detaching-anti-welding power; - a particular strong protection against rust; - shiny surfaces; - durability of the molds and punches; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an ultra thin oily film on the pieces, almost imperceptible and stable over time, which has a protective action.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid used for pressing and blanking of ferrous material, indicated especially for blanking, even with very heavy operations, when you want to obtain particularly clean pieces with a high finiture grade. It is obtained from a highly selected, hydrogenated, evaporatable mineral fluid base, free of volatile organic compounds (VOCs), blended with additives consisting of: - From synthetic origin greasy; - Additives which change the friction; - Anti-corrosives and anti-oxidants; - Polymeric EP additives and chlorine-paraffines with high anti-welding power and stability. These explicate among them a synergic action which allow to obtain a product which guarantee: - An excellent anti-weld and detaching power; - Lustrous surfaces, even in very heavy operation conditions; - Duration of the stamps; - Low odour; - Hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

X-ROLL 8401 (EXPORT ONLY) is a lubricant preparation with lubricant ester based additives mixed with solvent. The preparation is odourless, colorless, de-aromatized and desulfurized suitable for cold rolling of aluminium. It guarantees the following advantages: - desulphurised and dearomatised product; - good finish; - no residues or stains; - compatibility with the rolling process.