Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat and fluid oil for mechanical operations. It is made of a mixture of a high selected and hydro-finished paraffin mineral base and a combination of E.P. sulphur additives: inactive, anti-oxidants, metal passivators and anti-fog. These additives explain a synergic action between them, creating a high performance product, particularly suitable for removal and cutting operations. Properties: - good cleaning and decanting power of the scraps, for a high level machine cleaning; - excellent E.P. cutting and anti-welding power; - very low tendence to foaming, even with high pressure jets; - excellent resistance to thermal-oxidative attack and aging, for very prolonged operation durations, in absence of sludge and residues; - a good degreasing power, for very high quality finishes with low tolerances; - a very reduced formation of fumes and oil mists; - a natural high viscosity index. It is free from Chlorine, chlorinated compounds and heavy metals.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat coolant for heavy-duty mechanical processes. It features low viscosity and is free from chlorine and heavy metals such as zinc and lead; it is composed of highly greasy and complex substances mixed with active/inactive sulphur-based EP additives. The product is made from a high-quality, refined and hydrogenated mineral base with low odour and very narrow distillation range to minimize fumes and mist formations. The product's cooling power is particularly efficient thanks to its fluidity, while the anti-welding and lubricant power is supported additives which work synergistically among each others and in a wide range of temperatures. It guarantees: - low tendency to foam formation, particularly with high-pressure oil jets or high-speed spindle rotation; - excellent cutting power for high quality finishes, even with highly alloyed steels; - Excellent anti-corrosive and anti-rust protection of any ferrous materials thanks to specific and exclusive metal passivators; - High detergency and easy chip decantation; It can be easily removed with any petroleum solvent or with alkaline washing. It is not irritant and is characterized by moderate odor.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat coolant, made from a mixture of white paraffinic mineral oil severely hydrogenated and mixed with anti-wear additives and extreme pressure phosphorous, active/inactive sulphuric, greasy, adhesive, stabilizers and anti-oxidant additives that exert a synergetic action among each others with strong anti-welding properties. These properties give the product an excellent anti-wear lubricant and a very high cutting power, especially for high-strength alloy and especially stainless steels processes. The product features a light colour and moderate odor; it appears fluid and has a very low braking tendency to fumes and mists formations. It does not contain chlorinated compounds.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a very fluid neat cutting oil. It is obtained from a mixture of solvent-refined mineral paraffinic bases and friction modifier greasing additives, composed by natural fatty acid esters, which have been modified and stabilized, and anti-oxidants. The product has a very moderate and pleasant odour, a high flash point and therefore a slight tendency to evaporation. Being very fluid, it has a high cooling property. The additives are aimed to improve the tools’ lifespan and the surface finishing, especially when processing brass.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Neat cutting mineral oil obtained from highly selected paraffinic bases, chlorine-free and with high cooling power. It features moderate odour and very low tendency to fumes and mists formations. It is free from dangerous substances of any kind. The color is clear and limpid. It is inactive towards copper and its alloys and can be easily removed with any chlorinated and / or petroleum solvent.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Mineral oil for cutting obtained from highly selected paraffinic bases, with excellent lubricating properties. The smell is moderate and very reduced the tendency of the formation of fumes and mists. It is free of dangerous substances of any kind. The color is clear and limpid. It is inactive against copper and its alloys and can be easily removed from any chlorinated and/or petroleum solvent.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Mineral cutting oil obtained from highly paraffinic bases selected, with high cooling power. The odor is moderate and very reduced the tendency to the formation of fumes and fog. It’s free of hazardous substances of any kind. The color is clear and clear. The antisealdant additive consists of a mixture of sulphur, chlorinated and oily compounds, such as to ensure effective synergistic action and at the same time good anti-corrosion protection. It is inactive against copper and its alloys and easily removable from any petroleum solvent or alkaline detergents.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a very fluid neat cutting oil. It is obtained from a mixture of highly refined and hydro-finished mineral paraffinic bases and active sulphur-based EP additives, stabilizers and anti-oxidants. The product has a moderate odour, a high flash point and therefore a slight tendency to evaporation. Being very fluid, it has a high cooling property. The additives are aimed to improve the tools’ lifespan and the surface finishing on high-resistance ferrous steel alloys. It is free from Chlorine and derivatives. It is light-coloured and may stain copper and its alloys.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Mineral oil for cutting obtained from a highly selected and hydrofinite, clear paraffinic base with a very narrow distillation cut; It is free of volatile fractions and is equipped with a very high flash point for maximum Safety. It has an optimum viscosity gradation to guarantee a good power both lubricant and refrigerant. The smell is very moderate and very reduced the tendency to the formation of fumes and mists, both for the characteristics of the mineral base and for the type of additivation used. The Antisaldante additive, which gives the product a clear light brown colour, is constituted by a mix of sulphated and chlorinated compounds, such as to guarantee an effective synerchical action and at the same time a good anticorrosive Protection. It is inactive against copper and its alloys.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a mineral cutting oil, obtained from a carefully selected and hydro-finished paraffinic base, with a very narrow distillation cut; for safety reasons, it does not contain volatile compounds and its flash point is very high. The very high viscosity is aimed to achieve the highest lubricating and cooling performances at the same time. It has a very slight odour. In addition, its mineral base’s properties and the additives contained, reduce the tendency to fumes formation. The anti-welding additives give the products its clear light brown colour. They are obtained mixing sulphur and chlorine compounds, which are very effective in inhibiting corrosion. This oil is inactive with copper and its alloys.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat cutting oil, obtained from a mixture of highly refined mineral oil with anti-wear and extreme pressure additives: it contains phosphorous and active/Inactive sulphur, untuosant, adhesive, stabilizers and antioxidants additives which have a strong synergistic action. These give the product an excellent anti-wear lubricity and a very high cutting power, especially in the machining of steel alloys and also stainless steel. The product is light coloured, fluid, smells moderate and has a low tendency to the formation of fumes and mists. It does not contain chlorinated compounds.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a full-strength coolant-cooling fluid, characterised by a high degree of fluidity and a strong anti-invasive EP power, given in particular by the massive presence of chlorinated compounds together with solfo-phosphates,greased and synthetic compounds, which are a synerget Action. It is very light, inactive, with anti-wear power and protected against oxidation and Corrosion. It is suitable for very tough stainless steel machining, especially when the fluidity and cooling power of the product is essential and where the use of chlorinated additives is indispensable. It is also used as a cutting supplement to compensate for loss of EP power due to the dilution effect of foreign oils in whole-cut oils.

Family: Neat cutting oils
Type: Neat cutting mineral oil

CUTEX 15/22 S-SA is a cutting oil, made from a mixture of an highly selected, paraffinic, clear and with a very restricted distillation cut base and synthesis esters and additives: - Greasy, with high performance; - Anti-welding; - Anti-oxidant, anti-corrosive and metallic passivators. CUTEX 15/22 S-SA guarantees: - An excellent refrigerating power of the pieces, both for its high grade fluidity and for synthesis esters’ nature and presence of greasy agents; - An elevate flash point, for an elevate safety standard; - An excellent lubricating, anti-welding and anti-wear power, obtained thanks to its properties and the synergism of the ingredients; - A moderate odor, well tolerated; - Chemical inertia to all metallic alloys, both ferrous and non-ferrous (yellow and Aluminum alloys in particular); - A very reduced and restrained tendency to smokes and fogs formation; - An excellent swarf decantation power, which ensures restricted times of drying, centrifugation and dripping; - A very high hygienic-sanitary compatibility level; - An efficient swarf crushing.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a multifunctional lubricant for loss-lubrication systems and cutting operations, made from a highly-selected clear and with a very narrow cut of distillation, paraffin base, mixed with synthetic esters and the following additives: -high-performance greasing agents -inactive sulphide-based and phosphorus compounds-based anti-welding agents -antioxidants, anticorrosive and metal deactivators. It guarantees: -good cooling power of the pieces, for its fluidity degree and the particular nature of the synthetic esters and the greasing additives -high flash point for a high safety standard -excellent lubricant, anti-aging and anti-wear power, achieved thanks to the properties and synergism of the components -moderate and well-tolerated odour -chemical inertia towards all metal alloys, both ferrous and non-ferrous (particularly yellow alloys and aluminium alloys) -very reduced tendency to fumes and mists formations -good scrap decanting power, which ensures limited drying times by both centrifugation and dripping -very high degree of hygienic-sanitary compatibility -effective scrap crushing.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a multifunctional oil for waste lubrication and cut obtained by the mixture of a highly selected paraffin base, clear and with a very narrow cut of distillation, with esters of synthesis and additives: -Untuosant, highly performance; -Antisaldants based on inactive sulphates and phosphorous compounds; -Antioxidants, anticorrosives and metal passivators. Guarantees: -A good cooling power of the pieces, thanks to the particular nature of the synthetic esters and the untuosant additives present; -A high flash point, for a high safety standard; -Excellent lubricant, anti-aging and anti-wear power, obtained thanks to the properties and synergism of the ingredients; -A very moderate smell, well tolerated; -Chemical inertia towards all metallic alloys, both ferrous and non-ferrous (yellow alloys and aluminium alloys in particular); -An exceptionally small and restrained tendency towards the formation of fumes and mists; -A very high degree of hygienic-sanitary compatibility; -Effective scrap crushing.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a lubricant-cooling fluid from cutting obtained from a mixture of paraffinic bases severely refined to the solvent and composed with: -highly stable chlorine-based additives of extreme pressure, -active and inactive sulphetized sulphur, -stabilizers and antioxidantthat include a synergetic action with strong no sealing properties. These, together with the high degree of fluidity of the base, confer on the product: -a very high cutting power, especially in the machining of high-strength and stainless steel alloy steels, for high quality surface finishes; -reduced volatility/atomation; -otiimo refrigerant and detergent power; -excellent decaying and removal of scraps. The product is dark in color and has a high level of tolerability for Operators.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat cutting oil, obtained from a mixture of highly refined mineral oil with anti-wear and extreme pressure additives: it contains phosphorous and Inactive sulphur, untuosant, adhesive, stabilizers and antioxidants additives which have a strong synergistic action. These give the product an excellent anti-wear lubricity and a very high cutting power, especially in the machining of steel alloys and also stainless steel. The product is light coloured, fluid, smells moderate and has a low tendency to the formation of fumes and mists. It does not contain chlorinated compounds.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It’s a grinding and honing lubricant made with high refined raw material, low viscosity and free from PAHs. The product has: - Low odor - Specific esters - Synthetic fatty acids esters and inhibitors oxidation These properties make it high resistant to aging.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a hydrocarbon-based fluid, for mechanical grinding and smoothing processes, with low viscosity, free from aromatics, formulated with raw materials with a very high degree of refining and with a very narrow distillation cut. It is a product with a very moderate odor, low volatility, formulated in a mixture with esters of synthetic fatty acids, specific additives and oxidation inhibitors, which, by exerting a strongly synergistic action, make it extremely resistant to aging. HONING 09 ensures: - excellent surface finishes; -strong reduction of Cobalt dissolution: -high anti-corrosive protection; - extraordinary ability to separate the air (air release); -very effective heat removal.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Two types of lubricants are so important to use with authomatic machines: - Cutting oils - Total loss lubricant oil It’s normal that a certain quantity of lubricant go into the cutting oil tank. The normal parameters considering machinery instructions are: 10 – 30 lt for 8 hours per day. For that reason, the lubricant will be more fluid, losing its initial anti-welding natural properties and requiring expensive specific additives or its substitution. PLURILUB V 22 with a viscosity of 22 cSt at 40°C, is specific for unifying, in the same product, EP and cutting fluid properties with excellent standard lubricant properties (slide-way and hydraulic). This product guarantees: - Excellent EP power for cutting operations, thanks to ‘inactive’ EP additives that don’t affect copper and its alloys. - It satisfy the majority of working process on automatic machineries. If it’s required a more fluid ‘active’ cutting oil or there are heavy operations, it’s advisable to dilute the product. PLURILUB V 22 peculiarities: - High anti welding power - Excellent anti corrosive properties - High resistance to oxidation and rust - High V.I. - Compatible with seals - Free from chlorine and its derivatives

Family: Neat cutting oils
Type: Neat cutting mineral oil

Two types of lubricants are so important to use with authomatic machines: - Cutting oils - Total loss lubricant oil It’s normal that a certain quantity of lubricant go into the cutting oil tank. The normal parameters considering machinery instructions are: 10 – 30 lt for 8 hours per day. For that reason, the lubricant will be more fluid, losing its initial anti-welding natural properties and requiring expensive specific additives or its substitution. PLURILUB V 32 with a viscosity of 22 cSt at 40°C, is specific for unifying, in the same product, EP and cutting fluid properties with excellent standard lubricant properties (slide-way and hydraulic). This product guarantees: - Excellent EP power for cutting operations, thanks to ‘inactive’ EP additives that don’t affect copper and its alloys. - It satisfy the majority of working process on automatic machineries. If it’s required a more fluid ‘active’ cutting oil or there are heavy operations, it’s advisable to dilute the product. PLURILUB V 32 peculiarities: - High anti welding power - Excellent anti corrosive properties - High resistance to oxidation and rust - High V.I. - Compatible with seals - Free from chlorine and its derivatives.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Automatic machine tools require the simultaneous use of two different lubricants for the following sectors: 1) cutting fluid; 2) total loss lubrication. It has been noticed that, while working, a certain amount of oil used for lubrication ends up in the cutting fluid; quantities of oil between 10 and 30 lt every day for 8 hours can be considered normal, according to the constructive criteria of the machine. This involves a progressive dilution of the cutting fluid that, while losing its natural anti-heat properties, requires the integration of expensive additives or even its total replacement. The product PLURILUB V 46, with a viscosity of about 46 cSt at 40 ° C, has been formulated to meet the need to reunite in a single product the typical properties of an EP oil for total loss lubrication (slide guides) and a cutting oil, thus overcoming all the aforementioned drawbacks. It has the following properties: - Excellent power E.P. during the cutting operations, conferred by special anti-overheating additives of the "inactive" type that do not affect the Copper and its alloys. Meets most of the needs of machining on automatic machines. If the presence of very "hard" materials or the particular gravity of certain processes require the use of an "active" or in any case specific cutting fluid, in this case there will be a certain dilution of the cutting oil by the PLURILUB V 46 used as a lubricating oil, but with effects much reduced over time or even irrelevant. - High anti-wear power. - Strong anti-corrosive properties. - High resistance to oxidation and rust. - High viscosity index. - Compatibility with gaskets. - Absence of Chlorine and Chlorine-derivatives.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a clear neat coolant, for heavy-duty processes, of low viscosity and free from chlorine, consisting of extremely greasy and complex substances mixed with active/inactive sulphur-based extreme pressure additives. Its cooling power results particularly effective given the fluidity of the product, while the lubricant and anti-welding power and the load resistance is supported by a large presence of additives, which operate synergically in combination with each other in a wide range of temperatures. The fluid is obtained from a severely hydrogenated and high-quality mineral base with great hygienic-sanitary tolerability for the operators; it is free from odour and with a particularly narrow distillation interval, to minimize the formation of fumes and mists. The product is not irritating and features a very moderate and not unpleasant odour. It can be easily removed with any petroleum solvent or with alkaline washing. It is protected against oxidation thanks to an additivation system that guarantees long operations and contains metal deactivators for any ferrous material.