Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is a viscous fluid, especially used in the cold drawing of ferrous materials. The chemical formulation and the high deformation efficiency of the product allow to carry out operations of drawing without "bonder", even of square and rectangular sections (in particular the heavier, flat ones), guaranteeing in any case: - an excellent surface finish, especially of the edges; - tight tolerances for long processing intervals; - protection of dies from wear. It is free from chlorine and chlorinated compounds.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is a viscous fluid consisting of a mixture of chlorine compounds and anti-oxidant, greasy and anti-corrosive additives. These components allow to perform extremely heavy-duty mechanical deformation processes, particularly of stainless and hard and extra-hard alloy steel. It features: -very light color -light odor -high hygienic-sanitary compatibility -non-flammability -solubility with common degreasing solvents -no staining of yellow alloys It guarantees: -high-quality surface finish on even complex-geometry pieces -high lifetime of the moulds -maximum lubricity of the surfaces during the deformation phase.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is a highly additivated neat oil, for molding and deep drawing of highly alloyed and stainless steel, free from mineral oil and based on synthetic and natural biodegradable esters, mixed with organic compounds containing chlorine and anti-wear additives, antioxidants and metal passivators, which a synergistic action between them gives rise to a product with exceptional performance. In fact, it presents: - reduced formation of fumes and vapors during processing; - high flame resistance, for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, whereby the oil is dispersed on the metal surface quickly and uniformly; - excellent greasing power; - exceptional anti-welding cutting power, EP and lubricating-release agent for high quality finishes; - good resistance to oxidation and rust; -Good anti-wear properties. The liquid is clear, of moderate odor.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is a medium-viscosity neat metalworking fluid, particularly suitable for deformation and blanking processes, but it also finds application in chip removal operations. It is made from a highly-selected paraffin mineral base in mixture with sulfur-phosphorus EP and active and inactive sulfur-based additives and greasy agents, which exert a strong synergistic action among each others with strong anti-welding properties. Those properties provide an exceptionally high lubro-detaching power, especially for high-strength alloy and stainless steel processes. The product features light colour, very moderate odour and it is free from chlorine.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is an oil to be used for stamping and cutting of ferrous materials, with very strong anti-welding properties, particularly suitable for stainless steels of high hardness, when deep drawing with complex geometries is required or high quality finishes are required. It is obtained from an exclusive blend of highly stable mineral and vegetable bases with anti-welding additives based on: - active/inactive sulfur compounds; - sulfur-phosphorus compounds; - natural and synthetic greases; - friction modifier additives; - anti-corrosives and antioxidants These perform a synergic action between them that allows to obtain an absolutely unique product that guarantees: - an exceptional and singular release-anti-welding power; - surface shine; - duration of the molds and high surface finish of the worked pieces; - low odors; - hygienic-sanitary compatibility. It is free from chlorine and chlorinated derivatives.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is a strongly additivated lubricant, designed for deep drawing processes of high alloy and stainless steel. It is made from mineral oil, chlorine bases and greasing agents of natural and synthetic origin, anti-oxidant additives and metal passivators. The fluid appears clear, of very moderate odour and average viscosity, adhesive and with an exceptional lubro-detaching and anti-welding power. It is stabilized against oxidation.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is an oil to be used for molding and shearing of ferrous materials, with extraordinary anti-soldering and release properties, particularly suitable for high hardness stainless steels, when deep drawing with complex geometries is required and when high quality finishes are required. Free from mineral oil, it is obtained from a mixture of chlorinated compounds, active / inactive sulfur compounds, natural and synthetic greasing agents, friction modifying, anticorrosive and antioxidant additives. These form a complex system, exerting an exclusive and particularly effective synergistic action between them, which allows for an absolutely unique product that ensures: - an exceptional and singular detaching-antisoldering power; - surface gloss; - exceptional durability of the molds; - surface finishes of the machined pieces of the highest quality; - low odors; - hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

This is a stamping and blanking oil designed for ferrous materials, characterized by excellent anti-weld properties. It is especially recommended for stainless steels in deep drawing operations involving complex geometries, where high surface finish quality is required. It is formulated from a highly refined, solvent-treated, and carefully selected viscous mineral base oil, blended with anti-weld additives consisting of: -Chlorinated compounds; -Highly effective synthetic lubricity agents; -Friction-modifying additives. -These components act synergistically to deliver a product that ensures: -Exceptional release and anti-weld performance; -High surface brightness; -Extended tool and part life; -Low odor levels.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is a lubricant characterized by very strong anti-welding and release properties, formulated for drawing and blanking processes of ferrous materials, particularly high-hardness stainless steel, whenever complex-geometry deep drawing processes and high-quality finishes are required. The product is free from mineral oil and it is made from synthetic hydrocarbon bases, characterized by an exceptional "viscoelastic" response to loads and mixed with: - active/inactive sulfur compounds - sulfur-phosphorus compounds - natural and synthetic greasing agents - friction modifiers - anti-corrosive and anti-oxidant additives These components form a complex system by exerting among each others an exclusive and particularly effective synergistic action, which allows to obtain a high-performance product that guarantees the following properties: - exceptional release and anti-welding power - anti-rust protection and shiny surfaces - exceptional durability of the moulds - high-quality surface finishes on the machined pieces - light odour - hygienic-sanitary compatibility It is free from chlorine and its derivatives.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is an oil to be used for molding and shearing ferrous materials, equipped with very strong anti-welding and release properties, particularly suitable for highly hard stainless steels, when deep drawings with complex geometries must be carried out and when high quality finishes are required. Free from mineral oil, it is obtained from synthetic hydrocarbon bases, characterized by an exceptional "viscoelastic" response to loads, mixed with: - active/inactive sulfur compounds; - sulfur-phosphorus compounds; - unctuous agents of natural and synthetic origin; - friction modifier additives; - anti-corrosion and antioxidants. These form a complex system, exercising an exclusive and particularly effective synergistic action between them, which allows us to obtain an absolutely unique product that guarantees: - an exceptional and singular release-anti-welding power; - shine and anti-rust protection of surfaces; - exceptional mold durability; - surface finishes of the machined pieces of the highest quality; - low odors; - hygienic-sanitary compatibility. It is free from chlorine and chlorinated derivatives.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is a lubricant, formulated for drawing, deep drawing, punching and blanking processes of alloy steel. The product is free from mineral oil and it is made from a mixture of greasing compounds of both synthetic and natural origin and chlorine derivatives, which exert a strong synergistic action among each others. The fluid appears clear, of moderate viscosity and it features an extremely high adhesive, anti-welding, lubro-detaching and cutting power which guarantees excellent surface finishes of steel, even high-strength steel and with complex geometry. It can be easily removed with any hydrocarbon solvent or with an alkaline washing.

Family: Forming and Drawing Lubricants
Type: Synthetic hydraulic oil

It is a neat oil with strong additives for molding, drawing and shearing, of highly alloyed steels and stainless steel, based on active organic ingredients containing chlorine, mineral oil, natural and synthetic greasing agents, antioxidants and metal passivators and is NOT DANGEROUS. The liquid is clear, very moderate odor, viscous, sticky. X-DRAW 900 CL ensures: - an extraordinary detaching-antisoldering power; -high viscosity index for constant smoothness over a wide range of temperatures; - surface gloss; -life of molds and pieces; - low odors; - excellent hygienic-sanitary compatibility. It is stabilized against aging.