Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a ready-to-use multifunctional fluid, consisting of an evaporable fluid mineral base mixed with polisiloxane-based silicone oils, which, by exerting a synergetic action among themselves, result in a product with release, anti-adhesive, protective, detergent and lubricating characteristics. The product is clear, colourless and of a very moderate odour. K6083, when applied to the surfaces of different materials, first of all removes any sludge and residues that may be present and, after the fairly rapid evaporation of the solvent component, leaves a very thin, water-repellent, protective, lubricating oily film with a remarkable non-stick, anti-adhesive and slipping power. The product is free of volatile organic compounds (VOC).

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is an oil designed for drawing and blanking operations on ferrous materials, indicated for medium and heavy-duty blanking and deep drawing processes, whenever the intention is to obtain particularly clean pieces. It is made from a higly selected and hydrogenated fluid mineral base, quickly evaporable, of moderate odour and mixed with additives composed of: - Synthetic lubricant part; - friction modifiers; - anti-corrosive and anti-oxidant; - phosphorated compunds. These elements are characterized by great synergy among each others, which makes it possible for the product to guarantee: - Excellent release and anti-welding power; - shiny surfaces; - durability of the moulds and of the pieces; - light odour; - hygenic and sanitary compatibility. After the evaporation of the volatile component, the product leaves on the machined piece an oily film almost unnoticeable and stable over times.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for blanking and light deep drawing machining, in order to obtain particularly clean pieces. It is made from a highly selected and hydrogenated vanishing, fluid mineral base, characterized by a very moderate odour and mixed with additives consisting of: - synthetic greasing agents - friction modifiers - anti-corrosive and anti-oxidant agents These components exert a synergistic action among each others, which gives the product the following properties: - excellent lubro-detaching and anti-welding power - shiny surfaces - higher durability of the moulds and punches - high-quality surface finishes of the machined pieces - light odour - hygienic-sanitary compatibility The product is particularly suitable in case of subsequent high-heat treatments on the finished pieces (braze welding, heat treatments, etc…), as it does not leave residues, burnishings or stains on the metal surface. After the evaporation of the volatile component, the product leaves an ultra-thin and oily film on the machined pieces, almost invisible and stable over time, which exerts a protective action.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a vanishing lubricant, formulated for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for heavy-duty blanking and deep drawing processes, in order to obtain particularly clean pieces. It is made from a highly-selected and hydrogenated fluid, vanishing, mineral base, in mixture with the following additives: - greasing agents - friction modifiers - anti-corrosive and anti-oxidant Those exert a synergistic action among each others, which allows the product to guarantee: - excellent release and anti-welding power - great anti-rust protection - shiny surfaces - great surface finishes of the machined pieces - moderate odour - hygienic-sanitary compatibility After the evaporation of the volatile component, the product leaves on the pieces an ultra-thin, invisible oily film, which exerts a protective action, stable over time.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for blanking and medium-light deep drawing machining, in order to obtain particularly clean pieces. It is made from a highly selected and hydrogenated vanishing, fluid mineral base, characterized by a very moderate odour and mixed with additives consisting of: - synthetic greasing agents - friction modifiers - anti-corrosive and anti-oxidant agents These components exert a synergistic action among each other which gives the product the following properties: - excellent lubro-detaching and anti-welding power - shiny surfaces - higher durability of the moulds - light odours - hygienic-sanitary compatibility After the evaporation of the volatile component, the product leaves an ultra-thin, oily film on the machined pieces, almost invisible and stable over time, which exerts a protective action. The product is perfectly compatible with any treatment following the machining phase.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and blanking of ferrous materials, particularly suitable for light blanking and drawing operations, when you want to obtain particularly clean pieces. It is obtained from a fluid, evaporable, highly selected and hydrogenated mineral base, with a very moderate odor, mixed with additives consisting of: - greasing agents of natural origin; - friction modifiers; - anti-corrosion and antioxidants. These exert a synergic action between them which allows to obtain a product which guarantees: - excellent release-anti-welding power; - surface shine; - life of molds and pieces; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an almost imperceptible oily film on the piece, stable over time.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant designed for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for blanking and medium-light deep drawing machining, in order to obtain particularly clean pieces. It is made from a highly selected and hydrogenated, vanishing, fluid mineral base, characterized by very moderate odour and mixed with additives consisting of: -natural and synthetic greasing agents -friction modifiers -anti-corrosive and anti-oxidant agents These components exert a strong synergistic action among each others, which gives the product the following properties: -excellent lubro-detaching and anti-welding power -shiny surfaces -high durability of the moulds and punches -light odours -hygienic-sanitary compatibility

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

t is an evaporable fluid to be used for stamping and shearing of Aluminum sheets, particularly suitable for blanking, light drawing when you want to obtain particularly clean pieces. It is obtained from a highly selected evaporable and hydrogenated fluid mineral base. The product has: - an excellent release anti-welding power; - surface gloss; - duration of the molds and pieces; - low odors; - a high coefficient of oil distribution on the plate, for optimization of consumption in the g/cm² ratio and for simultaneous improvement of the surface quality of the plates work; - excellent hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant for drawing and blanking processes of ferrous and non-ferrous materials, especially designed for blanking and medium and heavy-duty drawing processes whenever the aim is to obtain particularly clean pieces. It is made from a highly selected and hydrogenated vanishing mineral fluid, of very moderate odour mixed with additives, constituted by: -Synthetic components; -Friction modifiers; -Anti-corrosive and anti-oxidants. -Specific EP additives for drawing and blanking processes These exert among each others a synergic action, which allows the product to guarantee: -Excellent anti-welding and release power; -Excellent resistance to residues formations; -Shiny surfaces; -Greater lifetime of the moulds and pieces; -Light odour; -Hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and cutting of ferrous and non-ferrous materials, particularly suitable for deep stamping thanks to the excellent EP power as well as for medium-light stamping and drawing processes, when particularly clean pieces are to be obtained. It is obtained from a fluid, evaporable, highly selected and hydrogenated mineral base, with a very moderate odor, mixed with additives consisting of: - natural and synthetic greases; - specific EP additives to increase cutting and deformation power; - friction modifiers; - anticorrosives and antioxidants. These perform a synergic action between them that allows to obtain a product that guarantees: - excellent release-anti-welding power; - excellent resistance to the formation of residues; - surface gloss; - duration of molds and punches; - low odors; - hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is an oil to be used for drawing and blanking processes of ferrous and non-ferrous materials, particularly designed for drawing operations, thanks to its great EP power, but also for blanking and light-medium deep drawing processes, whenever the aim is to obtain especially clean pieces. It is made from a higly selected and hydrogenated vanishing fluid mineral base, of moderate odor and mixed with additives consisting of: - Lubricant part of synthetic and natural origin; - Specific EP additives to increase the cutting and deformation power; - Friction modifiers; - Anti-corrosive and anti-oxidant. These elements are characterized by great synergy among each others, which makes it possible for the product to guarantee: - Excellent release and anti-welding power; - Great resistance to the formation of residues; - Shiny surfaces; - Durability of the moulds and the punches; - Light odors; - Hygenic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for molding and blanking of ferrous and non-ferrous materials, particularly suitable for blanking and light drawing, when you want to obtain particularly clean pieces. It is obtained from a highly selected and hydrogenated fluid, evaporable mineral base, with a very moderate odor, mixed with additives consisting of: -synthetic greasing agents; - friction modifiers; -anti-corrosives and antioxidants. These perform a synergistic action between themselves that allows for a product that ensures: - excellent detaching-antisoldering power; - surface gloss; -life of the molds; - excellent finishing of the edges of the machined pieces; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an ultra-thin oily film on the pieces, almost imperceptible and stable over time, which exerts a protective action. X-DRAW V 6230 is perfectly compatible with all treatments following the processing phase.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for drawing and blanking of ferrous and non-ferrous metals, containing chloroparaffins, particularly suitable for blanking and drawing, even very heavy, when you want to obtain particularly clean pieces. It is obtained from a highly selected and hydrogenated fluid, evaporable, highly selected and hydrogenated mineral base with a very moderate odor, mixed with additives consisting of: - synthetic lubricants; - friction modifiers; - EP and chloroparaffin polymeric additives with high anti-welding and stability properties. These perform a synergistic action between themselves that allows for a product that ensures: - an excellent detaching-antisoldering power; - excellent resistance to the formation of residues; - surface gloss; - duration of molds and pieces; - low odors; - hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is an evaporable fluid to be used for medium-light molding and shearing operations of ferrous and non-ferrous materials and in particular of light drawing and shearing of aluminum sheets, especially when you want to obtain particularly clean finished parts. It is obtained from a very fluid, evaporable, hydrogenated hydrocarbon base, characterized by a very high degree of purity and very moderate odor, with oily additives, friction and anti-wear modifiers, anticorrosive and antioxidants. It provides: - excellent detaching-anti-sealing power; - surface gloss; -excellent anti-wear power, for a long life of the molds and high quality finishes; - low odors; - optimization of consumption in the g / cm² ratio and of the surface quality of the processed sheets, thanks to a high oil distribution coefficient, which disperses quickly and uniformly on the metal surface; - excellent hygienic-sanitary compatibility.