Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a highly selected and hydrophilic mineral-based hydraulic oil, with a high viscosity index, for hydraulic controls, gears and kinematics in general, in all those cases in which the severe operating conditions require a lubricant with anti-wear properties, which reduces minimum mechanical wear of pumps, valves and mechanical moving parts. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve sticking, metal removal and filterability problems; it also meets the needs of the heaviest work cycles and resists oxidative decay at high operating temperatures. Ensures: - strong protection of the pumps, even in severe operating conditions; - superior viscoelastic resistance to intermittent loads; -excellent control of paints in very long duration tests; - very high resistance to oxidation in the TOST test; - remarkable hydrolytic stability.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high viscosity index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and Detergents-dispersants. It is classified Hvlp-D and therefore differs from normal hydraulic oils (labeled Hvlp) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, i.e. without losing its Features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. It also guarantees: -detergent and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; -reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic Hvlp-D 22 can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the Hydraulic Hvlp-D 46 keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system ITSELF. Finally possesses a very high viscosity index for: -reduce the viscosity loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; -improve the viscoelastic response of the oil to intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high viscosity index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and Detergents-dispersants. It is classified HVLP-D and therefore differs from normal hydraulic oils (labeled HVLP) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, i.e. without losing its features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. It also guarantees: - detergent and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; - reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic HVLP-D 32 can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the Hydraulic HVLP-D 46 keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system ITSELF. Finally possesses a very high viscosity index for: - reduce the viscosity loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; - improve the viscoelastic response of the oil to intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high light index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and Detergents-dispersants. It is classified Hvlp-D and therefore differs from normal hydraulic oils (labeled Hvlp) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, I.E. without losing its Features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. It also guarantees: -behavior and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; -reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic Hvlp-D 46 can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the Hydraulic Hvlp-D 46 keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system ITSELF. Finally possesses a very high light index for: -reduce the light loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; -improve the evoluted response of the oil to sunny load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high viscosity index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and detergents-dispersants. It is classified Hvlp-D and therefore differs from normal hydraulic oils (labeled Hvlp) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, i.e. without losing its Features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. Consists Of: -mineral bases having a very narrow cut of distillation, severely refined to the solvent and highly selected with regard to both the starting crude and the refining process, which involves a final treatment with hydrogen; -additives that confer superior anti-wear properties, protection of eps, antioxidants, antirust, anticorrosive, antifoam and "air release" of maximum quality, zinc-free, of "ashless" type. It also guarantees: -excellent dispersiveness, detergent and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; -reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic Hvlp-D 46 ZF can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the HYDRAULIC Hvlp-D 46 ZF Keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system itself. Finally possesses a very high viscosity index for: -reduce the viscosity loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; -improve the viscoelastic response of the oil to intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high Viscosity Index, for hydraulic controls, with marked anti-wear characteristics, antioxidants, anti-corrosion and detergent-dispersants. It is classified as HVLP-D and therefore differs from normal hydraulic oils (classified as HVLP) due to the fact that, instead of having demulsifying properties (ie of rapid separation from water), it can absorb up to 0.25% p of water without problems, that is, without losing its characteristics. It also has a high capacity to eliminate air ("Air Release" property), to prevent the formation of foam and to be filtered even at low micrometries. It also guarantees: - cleaning and cleaning of the hydraulic circuit and valves, preventing the formation of sticky residues, even in the presence of water; - reduced wear on the gaskets, improving the lubrication of the elastomer-metal contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in the control valves and in the cylinders of the hydraulic circuits of the machine tools can be advantageously counteracted as a consequence of the contamination by the cooling lubricant fluids. HYDRAULIC HVLP-D 68 can also avoid the effects of a potentially lacking lubrication due to the separation of water from the hydraulic oil, in systems with small reserves or with high oil circulation times, such as in mobile equipment. The characteristics of this oil also provide increased anti-stick-slip properties, reducing friction and wear. The detergent and dispersant properties of the Hydraulic HVLP-D 46 keep the impurities in suspension in the oil, to favor their eventual removal by the filtering system. As a result, it may be necessary in some cases to improve the capacity of the filtering system itself. Finally, it has a very high Viscosity Index for: - reduce the loss of viscosity in the presence of high temperatures and thus guarantee the efficiency of the power transmission system; - improve the viscoelastic response of the oil to intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high viscosity index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and Detergents-dispersants. It is classified Hvlp-D and therefore differs from normal hydraulic oils (labeled Hvlp) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, i.e. without losing its Features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. Consists Of: -mineral bases having a very narrow cut of distillation, severely refined to the solvent and highly selected with regard to both the starting crude and the refining process, which involves a final treatment with hydrogen; -additives that confer superior anti-wear properties, protection of eps, antioxidants, antirust, anticorrosive, antifoam and "air release" of maximum quality, zinc-free, of "ashless" Type. It also guarantees: -excellent dispersiveness, Detergent and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; -reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic Hvlp-D 68 ZF can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the HYDRAULIC Hvlp-D 46 ZF Keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system itself. Finally possesses a very high viscosity index for: -reduce the viscosity loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; -improve the viscoelastic response of the oil to intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a mineral oil for hydraulic controls, gears, bearings and kinematics in general, used in heavy conditions, when a lubricant with anti-wear properties, which reduces the mechanical pumps wear, valves and mechanical parts in movement is required. The product guarantees reliability and performance of the modern hydraulic systems used in the most varied sectors: construction and earth moving, mining, fishing, marine, injection molding, etc. It meets all the most important global hydraulic performance specifications (4Q09), reduces wear, valve sticking, metal removal and filterability problems; it also meets the needs of the heaviest work cycles (for example in continuous production or in the continuous service of equipment on loan) and resists oxidative decay at the highest operating temperatures. This oil was developed to meet current and future demands for hydraulic oils and ensures: - outstanding protection of the pumps, even in very severe operating conditions; - excellent control of paints in very long life tests; - very high resistance to oxidation in the TOST test; - excellent hydrolytic stability.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a mineral hydraulic oil of the highest quality for bearings, gears and kinematics in general, in all those cases in which the operating conditions require a lubricant having an ISO VG 10 grade with anti-wear properties, which reduces to a minimum the mechanical wear of pumps, valves and mechanical parts in general in motion. It is made of: - mineral bases having a very narrow distillation cut, strictly solvent-refined and highly selected for both the starting crude and the refining process, which provides for a final hydrogen treatment; - additives with anti-wear, antioxidant, anti-rust, anti-foam and air-release properties of the highest quality. The modern lubrication circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow to obtain not only a very high operating performance, but also exceptional durability of the oil charge, unthinkable only up to a few years ago. The following properties are thus required for the oil, all ensured over time by PROMODYNE 10: - maximum level of anti-wear power over time, for operating durations of over 25,000 hours, as verified by analytical monitoring; - maximum degree of filterability of the oil (even at the lowest micrometries to avoid not only the clogging of the filters, but also the depletion of the additives); - exceptional resistance to oxidation, thermal decay, hydrolysis and aging, obtained through the qualitative selection of both the base, as indicated above, and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a mineral-based hydraulic oil, of the highest quality, for hydraulic controls, gears, bushings and kinematics in general, in all those cases where the harsh operating conditions require a lubricant with anti-wear properties, which reduces wear and tear to a minimum mechanical of pumps, valves and moving mechanical parts. The product ensures reliability and performance of the most modern hydraulic systems used in the most varied sectors: construction and earth moving, mines, fishing, navy, injection molding, etc. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve bonding, metal removal and filterability problems; it also meets the needs of the most demanding work cycles (for example in continuous production or in the continuous service of loan equipment for use) and resists oxidative decay at the highest operating temperatures. This oil has been developed to meet current and future demands of hydraulic systems and ensures: - marked protection of pumps and servo-valves with restricted tolerances even under very severe operating conditions, for both pressure and temperature levels; - excellent control of paints in tests of very long duration; - very high oxidation resistance in the TOST test; - excellent hydrolytic stability. The modern hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow to obtain not only a very high operating performance, but also exceptional durability of the oil charge, unthinkable only up to few years ago. The following properties are required for oil, all guaranteed over time by PROMODYNE 32: - maximum level of anti-wear power over time, for operating durations of more than 25,000 hours (as verified by analytical monitoring), balanced with friction modifiers that ensure sufficient static friction for wet clutches and parking brakes; - maximum degree of filterability of the oil (even at the lowest micrometries to avoid not only the clogging of the filters, but also the depletion of the additives); - exceptional resistance to oxidation, thermal decay, hydrolysis and aging, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts; - prolonged duration of oil charge and filters.

Family: Industrial lubricants
Type: Mineral hydraulic oil

High viscosity index oil for hydraulic controls, gears, bushings and kinematic mechanism in general, especially used when severe operating conditions demand a lubricant with anti-wear properties which minimizes the wear of pumps, valves and mechanical parts in motion. The product ensures the reliability and performance of modern hydraulic systems used in many different sectors: construction and earthmoving, mining, fishing, navy, injection molding, etc. In addition to meeting the most important global hydraulic performance specifications (4Q09), it reduces wear, the bonding of valves, the removal of metal and problems of filterability; furthermore, it meets the needs of the most demanding work cycles (for example in the non-stop production or in the non-stop service of equipment on loan) and resists to oxidative decay at the highest operating temperatures. This oil has been developed to meet the current and future demands for hydraulic oils and provides: - strong protection of pumps, even under very severe operating conditions; - excellent control of the paints in very long endurance tests; - very high resistance to oxidation in the TOST test; - excellent hydrolytic stability. The modern hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow to obtain not only a very high operating performance, but also exceptional durability of the oil charge, unthinkable only up to few years ago. The following properties are required for oil, all guaranteed over time by PROMODYNE 46: - maximum level of anti-wear power over time, for operating durations of more than 25,000 hours (as verified by analytical monitoring), balanced with friction modifiers that ensure sufficient static friction for wet clutches and parking brakes; - maximum degree of filterability of the oil (even at the lowest micrometries to avoid not only the clogging of the filters, but also the depletion of the additives); - exceptional resistance to oxidation, thermal decay, hydrolysis and aging, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts; - prolonged duration of oil charge and filters.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a mineral-based hydraulic oil, of the highest quality, for hydraulic controls, gears, bushings and kinematics in general, in all those cases where the harsh operating conditions require a lubricant with anti-wear properties, which reduces wear and tear to a minimum mechanical of pumps, valves and moving mechanical parts. The product ensures reliability and performance of the most modern hydraulic systems used in the most varied sectors: construction and earth moving, mines, fishing, navy, injection molding, etc. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve bonding, metal removal and filterability problems; it also meets the needs of the most demanding work cycles (for example in continuous production or in the continuous service of loan equipment for use) and resists oxidative decay at the highest operating temperatures. This oil has been developed to meet current and future demands of hydraulic systems and ensures: - marked protection of pumps and servo-valves with restricted tolerances even under very severe operating conditions, for both pressure and temperature levels; - excellent control of paints in tests of very long duration; - very high oxidation resistance in the TOST test; - excellent hydrolytic stability. The modern hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow to obtain not only a very high operating performance, but also exceptional durability of the oil charge, unthinkable only up to few years ago. The following properties are required for oil, all guaranteed over time by PROMODYNE 68: - maximum level of anti-wear power over time, for operating durations of more than 25,000 hours (as verified by analytical monitoring), balanced with friction modifiers that ensure sufficient static friction for wet clutches and parking brakes; - maximum degree of filterability of the oil (even at the lowest micrometries to avoid not only the clogging of the filters, but also the depletion of the additives); - exceptional resistance to oxidation, thermal decay, hydrolysis and aging, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts; - prolonged duration of oil charge and filters.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a highly performance product, of the "ashless" type, with an extremely low viscosity, mainly indicated for the lubrication of the high speed spindles of machine tools. It is made up: - a highly refined and selected hydrocarbon fluid based on normal-paraffins and iso-paraffins with a very high degree of purity; - additives with anti-wear, antioxidant, anti-rust, anti-foam and "air release" properties of the highest quality level, zinc-free, "ashless" type. Features: - maximum level of the anti-wear power over time, of the ashless type, for extremely long operating durations; - exceptional resistance to oxidation, thermal decay, hydrolysis and aging of the oil, obtained through the qualitative selection of both the hydrocarbon base and the additives used, to help minimize the formation of deposits; - excellent anti-foam power, air release and water demulsibility; - excellent anti-rust and anti-corrosive power of mechanical parts, to improve the durability of machinery and provide greater long-term precision.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic lubricant for hydraulic controls, bearings, gears and kinematics in general, in all of those situations in which the heavy-duty conditions require an ISO VG 10 lubricant with anti-wear properties to minimize the mechanical wear of pumps, valves and other moving mechanical parts. It is constituted by: - mineral bases with a very narrow distillation cut, highly selected and solvent-refined regarding both the original crude oil and the refining process, which includes a final hydrogen treatment - high-quality, ashless and zinc-free anti-wear, anti-oxidant, anti-rust, anti-foam and air-release additives Modern power transmission hydraulic circuits are equipped with extremely efficient filtration systems (down to < 1 micron) and this allows not only to obtain a very high operating performance, but also a greater duration of the oil charge. The product guarantees the following properties: - maximum level of ashless anti-wear power, for durations over 25,000 hours, as verified by analytical monitoring - maximum degree of filterability (even at the lowest micrometries) to not only avoid the clogging of the filters, but also the additives depletion - exceptional resistance to oxidation, thermal decay and hydrolysis, obtained through a qualitative selection of both the oil base and the additives in it - excellent anti-foam, air release and dewatering properties - excellent anti-rust and anti-corrosive power of the mechanical parts

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, in all those cases where the harsh operating conditions require a lubricant having ISO VG 68 grade with anti-wear properties, which reduces mechanical pump wear to a minimum, valves and mechanical parts in general in motion. It is made of: - Mineral bases having a very narrow distillation cut, severely refined to the solvent and highly selected for both the starting crude and the refining process, which provides for a final hydrogen treatment; - Additives with anti-wear, antioxidant, anti-rust, anti-foam and high-quality "air-release", "ashless" type Zinc-free. Modern power transmission hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow not only a very high operating performance, but also exceptional durability of the oil charge, which are unthinkable only until a few years ago. PROMODYNE ZF 68 has the following characteristics, granted in time: - Maximum anti-wear power level, in order to last more than 25.000 hours, as supervised; - Maximum oil filterability capacity, even at the lowest micrometer, in order to avoid filter stoppage and additive depletion; - Excellent resistance to oxidation, thermic deterioration, hydrolysis and oil ageing, obtained from the quality selection of the base, as up indicated, and from the used additives; - Excellent anti-foam, “air release” and water demulsivity power; - Excellent anti-rust and anti-corrosive power of the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, with a high Viscosity Index, in all those cases where the harsh operating conditions require a lubricant having an ISO VG 46 grade with anti-wear properties, which reduces to a minimum the mechanical wear of pumps, valves and mechanical parts in general in movement. It is made of: - Mineral bases having a very narrow distillation cut, severely refined to the solvent and highly selected for both the starting crude and the refining process, which provides for a final hydrogen treatment; - Additives with anti-wear, antioxidant, anti-rust, anti-foam and high-quality "air-release", "ashless" type Zinc-free. Modern power transmission hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow not only a very high operating performance, but also exceptional durability of the oil charge, which are unthinkable only until a few years ago. PROMODYNE ZF SHV 46 has the following characteristics, granted in time: - Maximum anti-wear power level, in order to last more than 25.000 hours, as supervised; - Maximum oil filterability capacity, even at the lowest micrometer, in order to avoid filter stoppage and additive depletion; - Excellent resistance to oxidation, thermic deterioration, hydrolysis and oil ageing, obtained from the quality selection of the base, as up indicated, and from the used additives; - Excellent anti-foam, “air release” and water demulsivity power; - Excellent anti-rust and anti-corrosive power of the mechanical parts; - High Viscosity Index in order to: - reduce viscosity loss with high temperature and guarantee, in this way, the power transmission system efficiency; - improve the viscoelastic reaction to the intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a mineral-based hydraulic oil, obtained from paraffinic bases strictly solvent-refined and carefully selected; it features a Viscosity Index higher than the average for high-speed kinematics whenever the heavy-duty operations necessitate a lubricant with anti-wear properties in order to minimize the mechanical wear of the surfaces involved. It ensures: - Remarkable protection of the mechanical moving parts with tight tolerances; - Exceptional monitoring of the paints in testing for a prolonged period of time. - Maximum level of anti-wear power over time even for long-lasting operations, balanced by friction modifiers which ensure a sufficient static friction for wet clutch systems and parking brakes; - Extremely high resistance to oxidation, heat decay, hydrolysis and aging, resulting in a prolonged duration of service even in the presence of relatively high temperatures; - Great anti-foam, air release and demulsibility power; - Excellent anti-rust and anti-corrosion power on the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic lubricant, made from highly-selected and solvent-refined mineral paraffin bases. It features a higher viscosity index, compared to other hydraulic lubricants and it finds application in hydraulic controls, gears, bushings and kinematics in general, in all of those situations in which the heavy-duty conditions require a lubricant with anti-wear properties to minimize the mechanical wear of pumps, valves and other moving mechanical parts. The product ensures reliability and performance for various industries, such as: construction and earth moving, mining, fishing, marine industry, injection molding, etc. It guarantees the following properties: - excellent protection of pumps and servo-valves with restricted tolerance - excellent control of the paints for prolonged tests - highest level of anti-wear power over time, even for long durations, balanced with friction modifiers to ensure sufficient static friction in oil-bath clutches and parking brakes - extremely high resistance to oxidation, thermal decay and hydrolysis, even with relatively high temperatures - excellent anti-foam and air release properties and great separation from water - excellent anti-rust and anti-corrosive power on the mechanical parts

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic lubricant, made from highly-selected and solvent-refined mineral paraffin bases. It features a higher viscosity index, compared to other hydraulic lubricants and it finds application in hydraulic controls, gears, bushings and kinematics in general, in all of those situations in which the heavy-duty conditions require a lubricant with anti-wear properties to minimize the mechanical wear of pumps, valves and other moving mechanical parts. The product ensures reliability and performance for various industries, such as: construction and earth moving, mining, fishing, marine industry, injection molding, etc. It guarantees the following properties: - excellent protection of pumps and servo-valves with restricted tolerance - excellent control of the paints for prolonged tests - highest level of anti-wear power over time, even for long durations, balanced with friction modifiers to ensure sufficient static friction in oil-bath clutches and parking brakes - extremely high resistance to oxidation, thermal decay and hydrolysis, even with relatively high temperatures - excellent anti-foam and air release properties and great separation from water - excellent anti-rust and anti-corrosive power on the mechanical parts

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic lubricant, made from highly-selected and solvent-refined mineral paraffin bases. It features a higher viscosity index, compared to other hydraulic lubricants and it finds application in hydraulic controls, gears, bushings and kinematics in general, in all of those situations in which the heavy-duty conditions require a lubricant with anti-wear properties to minimize the mechanical wear of pumps, valves and other moving mechanical parts. The product ensures reliability and performance for various industries, such as: construction and earth moving, mining, fishing, marine industry, injection molding, etc. It guarantees the following properties: - excellent protection of pumps and servo-valves with restricted tolerance - excellent control of the paints for prolonged tests - highest level of anti-wear power over time, even for long durations, balanced with friction modifiers to ensure sufficient static friction - extremely high resistance to oxidation, thermal decay and hydrolysis, even with relatively high temperatures - excellent anti-foam and air release properties and great separation from water - excellent anti-rust and anti-corrosive power on the mechanical parts

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic lubricant, made from highly-selected and solvent-refined mineral paraffin bases. It features a higher viscosity index, compared to other hydraulic lubricants and it finds application in hydraulic controls, gears, bushings and kinematics in general, in all of those situations in which the heavy-duty conditions require a lubricant with anti-wear properties to minimize the mechanical wear of pumps, valves and other moving mechanical parts. The product ensures reliability and performance for various industries, such as: construction and earth moving, mining, fishing, marine industry, injection molding, etc. It guarantees the following properties: - excellent protection of pumps and servo-valves with restricted tolerance - excellent control of the paints for prolonged tests - highest level of anti-wear power over time, even for long durations, balanced with friction modifiers to ensure sufficient static friction - extremely high resistance to oxidation, thermal decay and hydrolysis, even with relatively high temperatures - excellent anti-foam and air release properties and great separation from water - excellent anti-rust and anti-corrosive power on the mechanical parts

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic lubricant, made from highly-selected and solvent-refined mineral paraffin bases. It features a higher viscosity index, compared to other hydraulic lubricants and it finds application in hydraulic controls, gears, bushings and kinematics in general, in all of those situations in which the heavy-duty conditions require a lubricant with anti-wear properties to minimize the mechanical wear of pumps, valves and other moving mechanical parts. The product ensures reliability and performance for various industries, such as: construction and earth moving, mining, fishing, marine industry, injection molding, etc. It guarantees the following properties: - excellent protection of pumps and servo-valves with restricted tolerance - excellent control of the paints for prolonged tests - highest level of anti-wear power over time, even for long durations, balanced with friction modifiers to ensure sufficient static friction - extremely high resistance to oxidation, thermal decay and hydrolysis, even with relatively high temperatures - excellent anti-foam and air release properties and great separation from water - excellent anti-rust and anti-corrosive power on the mechanical parts

Family: Industrial lubricants
Type: Mineral hydraulic oil

It’s a high index viscosity hydraulic oil for hydraulic controls, gears, bearings and kinematics. It’s useful for those heavy operations in which is required an anti-wear property helping minimize mechanical wear, valves and mechanical parts in movement. The product ensure reliability and performance of the modern hydraulic systems in different fields, such as: construction and land handling, mining, fishing, marine, injection moulding.. SPRINTER FHP 15 ensures: - Specific hydraulic performance - Wear reduction - Valves bonding - Metal removing - High performance even in heavy operations - High resistance with higher temperatures - Resistance to oxidative decay This type of product guarantees: - Excellent valves protection, even in hard conditions - Excellent varnishes control during long lasting test - High oxidation resistance in TOST test - High hydrolytic stability

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is an oil with a very high Viscosity Index, for hydraulic controls, gears, bushings and kinematic mechanisms in general, in all those cases where the severe operating conditions require a lubricant with properties anti-wear, which minimizes the mechanical wear of pumps, valves and moving mechanical parts. The product ensures reliability and performance of modern hydraulic systems used in the most varied sectors: construction and earthmoving, mines, fishing, marine, injection molding, etc. In addition to satisfying all the most important global hydraulic performance specifications, it reduces wear, valve bonding, metal removal and filterability problems; it also meets the needs of the most demanding work cycles (for example in the continuous production or continuous service of loaned equipment) and resists oxidative decay at the highest operating temperatures. This oil has been developed to meet the current and future demands of hydraulic oils and ensures: - strong protection of the pumps, even in very severe operating conditions; - superior viscoelastic resistance to intermittent loads; - excellent control of paints in tests of very long duration; - very high oxidation resistance in the TOST test; - remarkable hydrolytic stability.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a “detergent” hydraulic fluid for hydraulic controls, bearings, gears and kinematics in general. It finds application whenever the heavy-duty conditions require a lubricant with ISO VG 22 gradation and anti-wear properties in order to minimize the mechanical strain of pumps, valves and any other moving mechanical component in general. It is classified HLP-D which makes it different from regular hydraulic oils (classified HLP) as, instead of having demulsive properties (to guarantee quick separation from water), can absorb up to 0,25%p of water without losing its technical characteristics and other issues. It is constituted by: - Mineral bases with a very narrow distillation cut and solvent-refined, higly selected as for both the initial crude oil and also the refining process, which involves a final hydrotreatment. - Additives with anti-wear, anti-oxidant, anti-rust, anti-foam and “air release” properties of the highest quality. Modern hydraulic circuits of power transmissions, equipped with extremely efficient filtration systems (even below 1 micron), allow to not only achieve great levels of efficiency but also a superior duration of the oil charge. The product guarantees over time all of the required properties, which are the following: - Highest level of anti-wear power over time, for durations superior to 25.000 hours, as confirmed by analytical monitoring; - Highest level of oil filterability (even at the lowest levels of micrometric measurements) to not only avoid filters clogging but additives deplation as well; - Exceptional resistance to oxidation, thermal decay, hydrolysis and aging, achieved thanks to a quality selection of both the base and the additives used. - Great anti-foam and “air release” power; - Excellent anti-rust power and properties of anti-corrosion of the mechanical parts; - High detergent power to improve the cleaning level of the hydraulic circuits, particularly of the valves and to prevent residues and rubber formations, especially if caused by small amounts of water absorbed in oil (up to 0,25%) without altering its quality; - Reduction of the seals wear, improving the lubrication of the metal-in-elastomer contact.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a "detergent" type hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, in all those cases in which the severe operating conditions require a lubricant having an ISO VG 32 grade with anti-wear properties, which reduces to a minimum mechanical wear of pumps, valves and mechanical parts in general in motion. It is classified HLP-D and therefore differs from normal hydraulic oils (classified HLP) in that, instead of having demulsive properties (i.e. rapid separation from water), it can absorb up to 0.25% w of water without problems, that is, without losing its technological characteristics. It is made up: -mineral bases having a very narrow distillation cut, severely solvent refined and highly selected as regards both the starting crude oil and the refining process, which involves a final hydrogen treatment; -additives with antiwear, antioxidant, antirust, antifoam and "air release" properties of the highest quality level. The modern hydraulic power transmission circuits, in fact, equipped with extremely efficient filtration systems (down to 1 micron) allow to obtain not only a very high operating efficiency, but also exceptional duration of the oil charge, unthinkable. only until a few years ago. The following properties are thus required of the oil, all guaranteed over time by the SPRINTER HLP-D 32: - maximum level of anti-wear power over time, for operating durations exceeding 25,000 hours, as verified by analytical monitoring; - maximum degree of oil filterability (even at the lowest micrometres to avoid not only the clogging of the filters, but also the depletion of additives; - exceptional resistance to oxidation, thermal decay, hydrolysis, and aging of the oil, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam and air release power ("air release"); - excellent anti-rust and anti-corrosion power of mechanical parts; - high detergent power to improve the cleaning of the hydraulic circuit, in particular of the valves, and prevent the formation of deposits and gums, especially if caused by the presence of small quantities of water, which is incorporated into the oil (up to 0.25% ) without altering its quality; -reduction of wear on the seals, improving the lubrication of the elastomer-metal contact.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It’s a detergent hydraulic oil for hydraulic and kinematic system, bearings and gears. It is suitable for those heavy operating conditions in which is required a lubricant with ISO VG 46 grade and anti-wear properties that reduced the mechanical wear of pumps, valves and mechanical parts. It has a HLP-D classification, so it differs from normal hydraulic oils (HLP-D classified), not for its demulsifying properties, but because of the capacity of absorbing water up to 0,25%, without detaching from its own technological properties. It’s made up of: - Solvent highly selected and refined mineral bases with a restricted distillation cut, regarding both the starting crude oil and the refining process, which involves a final hydrogen treatment; - Additives with anti-wear, antioxidant, antirust, antifoam and “air release” properties of the highest quality level. The modern hydraulic power transmission circuits have an extremely efficient filtration system (below 1 micron) which helps to gain exceptional life times of the oil charge that was not possible until few years ago. It guarantees: - Excellent anti-wear property level during time, more than 25.000 hours, as verified by analytical monitoring; - Maximum grade of filterability oil; - Excellent resistance to oxidation, thermal decay, hydrolis and aging of the oil, through a qualitative selection both of the base and the additives used. - Excellent anti foam and air release property; - Excellent antirust and anticorrosive power of mechanical parts; - High detergent power, which improve the cleansing of hydraulic circuit, in particular for valves. It allows preventing dirt and wheels formation, especially if formed by water presence in the oil (up to 0,25%) without changing its properties; - Reduction of seal wear improving the elastomer-metal contact lubrication.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a "detergent" type hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, in all those cases in which the severe operating conditions require a lubricant having an ISO VG 68 grade with anti-wear properties, which reduces to a minimum mechanical wear of pumps, valves and mechanical parts in general in motion. It is classified HLP-D and therefore differs from normal hydraulic oils (classified HLP) in that, instead of having demulsive properties (i.e. rapid separation from water), it can absorb up to 0.25% w of water without problems, that is, without losing its technological characteristics. It is made up: -mineral bases having a very narrow distillation cut, severely solvent refined and highly selected as regards both the starting crude oil and the refining process, which involves a final hydrogen treatment; - additives with antiwear, antioxidant, antirust, antifoam and "air release" properties of the highest quality level. The modern hydraulic power transmission circuits, in fact, equipped with extremely efficient filtration systems (down to 1 micron) allow to obtain not only a very high operating efficiency, but also exceptional duration of the oil charge, unthinkable. only until a few years ago. The following properties are thus required of the oil, all guaranteed over time by the SPRINTER HLP-D 68: - maximum level of anti-wear power over time, for operating durations exceeding 25,000 hours, as verified by analytical monitoring; - maximum degree of oil filterability (even at the lowest micrometres to avoid not only the clogging of the filters, but also the depletion of additives; - exceptional resistance to oxidation, thermal decay, hydrolysis, and aging of the oil, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam and air release power ("air release"); - excellent anti-rust and anti-corrosion power of mechanical parts; - high detergent power to improve the cleaning of the hydraulic circuit, in particular the valves, and prevent the formation of deposits and gums, especially if caused by the presence of small quantities of water, which is incorporated into the oil (up to 0.25% ) without altering its quality; -reduction of wear of the seals, improving the lubrication of the elastomer-metal contact.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is an oil with a high viscosity index, for oleo-dynamic controls, gears, bushings and kinematics in general, in all those cases in which the heavy operating conditions require a lubricant with anti-wear properties, which minimizes the mechanical wear of pumps, valves and moving mechanical parts. The product ensures reliability and performance of modern hydraulic systems used in the most varied sectors: construction and earth moving, mining, fishing, marine, injection molding, etc. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve bonding, metal removal and filterability problems; it also meets the needs of the most demanding work cycles (for example in continuous production or in the continuous service of loan equipment for use) and resists oxidative decay at high operating temperatures. It provides: - strong protection of the pumps, even under severe operating conditions; - superior viscoelastic resistance to intermittent loads; - excellent control of paints in tests of very long duration; - very high resistance to oxidation in the TOST test; - considerable hydrolytic stability.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic lubricant, characterized by a high viscosity index and suitable for hydraulic controls, gears, bearings and kinematics in general, in all of those situations in which the heavy-duty conditions require a lubricant with anti-wear properties to minimize the mechanical wear of pumps, valves and other moving mechanical parts. The product ensures reliability and performance for various industries, such as: construction and earth moving, mining, fishing, marine industry, injection molding, etc. The product meets the most important global hydraulic performance standards and reduces wear, sticking of the valves, removal of metal and filterability issues; it also meets the requirements of the most heavy-duty work cycles (continuous production or continuous service of leased equipments) and it is resistant to oxidative decay, with high temperatures. It guarantees the following properties: - great protection of the pumps, even with heavy-duty conditions - higher viscoelastic resistance to intermittent loads - excellent control of the paints in tests of prolonged duration - extremely high resistance to oxidation with TOST test - exceptional hydrolytic stability

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is an oil with a high viscosity index, for hydraulic controls, gears, bushings and kinematic mechanisms in general, in all those cases where the severe operating conditions require a lubricant with properties antiwear, which minimizes the mechanical wear of pumps, valves and mechanical parts in motion. The product ensures the reliability and performance of modern hydraulic systems used in the most varied sectors: construction and earth moving, mining, fishing, marine, injection molding, etc. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve sticking, metal removal and filterability problems; it also meets the needs of the heaviest work cycles (for example in continuous production or continuous service of equipment on loan) and resists oxidative decay at high operating temperatures. Ensures: - outstanding protection of the pumps, even in very severe operating conditions; - superior viscoelastic resistance to intermittent loads; - excellent control of paints in very long life tests; - very high resistance to oxidation in the TOST test; - remarkable hydrolytic stability.