To view all products, leave the field empty and press Find

All products

Family: Neat cutting oils
Type: Additive for neat oils

It is an anti-seize compound, a cutting integrator, easily soluble in mineral oil and vegetable oil, to be used in addition to the whole cutting oil in use for all heavy mechanical machining, in particular of alloy steels and high strength stainless steel, both hard and extra-hard. It consists of a mixture of active components, which include a synergy action to improve the surface finish of the workpieces (the phenomenon of the cutting edge is eliminated) and the tool life. It combines to the EP properties a specific untuosant power particularly effective for the processing of doughy materials.

Family: Special products
Type: Special product

It is an antifoam concentrate, specifically formulated to reduce or eliminate the foaming phenomena in oils especially based on both natural and synthetic esters, but also mineral oils. It consists of a combination of silicone derivatives and synthetic hydrocarbons mixed with stabilizing additives, which exert a strong synergistic effect between them and does not present any indication of danger. Added to the lubricating oil in use, ADD FOAM PLUS ensures: -Simple and quick dispersibility. - Very high speed of foam removal and air release (air release) at recommended use concentrations.

Family: Neat cutting oils
Type: Additive for neat oils

It is a compound of lubricating mineral oils, consisting of a mixture of above base calcium sulfonate in mineral oil, it is presented as a dark brown honey-coloured liquid, to be used in mixture with lubricating mineral oils in service, particular the whole cutting oils, when you want to neutralize the presence of any acidic substances. Used in the recommended proportions, it gives the oil: -an acid Alkaline reserve; -a raised detergent power; -excellent Antirust Characteristics.

Family: Neat cutting oils
Type: Additive for neat oils

It’s an anti seize compound, brown color and with moderate odor. To use in addition to all heavy machining chip removal, cutting and forming of alloy steel at high resistance. Its mixture is a set of active chemical components to improve both treated surfaces finish and tools life.

Family: Neat cutting oils
Type: Additive for neat oils

It is a light brown anti-seize compound, to be used in addition to the whole cutting oil in use to improve its performance, in the heaviest machining processes in particular of high-strength alloy steels. It consists of a mixture of inactive components, which include a synerry action to improve the surface finish of the workpieces and the life of the tools. It joins the EP properties with a specific untuosant power very effective in the working of doughy materials. It is particularly indicated as an additive for the Harolbio line cutting oils.

Family: Neat cutting oils
Type: Additive for neat oils

It is a light brown anti-seizure compound suitable for all heavy mechanical operations, especially of high strength alloy steels. It consists of a mixture of inactive components that make it particularly suitable as an additive for cutting oils of the Harolbio line. It is particularly indicated for: -Improve the lubricating power to machine pasty materials; -Improve surface finishes and tool life; -Reduce friction and wear of all mechanical elements.

Family: Industrial lubricants
Type: Colorless odorless white oil

It is a medicinal mineral-based white oil, derived from higly selected and refined raw materials and subjected to specific treatments in order to achieve the required degrees of purity. The product is completely colourless, odourless and tasteless. Thanks to its high degree of purity, the product meets the suitability requirements of the most severe international pharmacological standards: in particular, it is conform to the Farmacopea Ufficiale Italiana (XI edition) and the European Pharmacopoeia (VI edition). It also fulfills the conditions of the following paragraphs of the FDA (USA). - FDA 21 CFR 172.878 (for use in food); - FDA 21 CFR 178.3570 (with incidental food contact); - FDA 21 CFR 178.3620 (component of nonfood articles intended for use in contact with food). It features good oxidation resistance at a high flash point.

Family: Industrial lubricants
Type: Mineral lubricating oil

Mineral oil with high resistance against oxidation, protected against the formation of foam, low carbonous residue, low volatility and with a high flash point. It is obtained from highly selected paraffinic bases and is endowed with excellent lubricating properties. The color is clear, the smell is moderate and very reduced is the tendency to the formation of fumes and mists. It is free from components of plant and/or animal origin and dangerous substances of any kind. It is inactive against copper and its alloys and can be easily removed from any petroleum distillate or alkaline washing. It is very stable to thermal-oxidative decay and if maintained at a temperature of < 60 °c It does not give rise in time to the formation of sludge, residues, lacquers (surface stains), glues, encrustations or other phenomena of such nature. It is inert and indeed carries out a protective action against both ferrous and non-ferrous materials, such as copper alloys and aluminium alloys.

Family: Industrial lubricants
Type: Mineral lubricating oil

Mineral oil with high resistance against oxidation, protected against the formation of foam, low carbonous residue, low volatility and with a high flash point. It is obtained from highly selected paraffinic bases and is endowed with excellent lubricating properties. The color is clear, the smell is moderate and very reduced is the tendency to the formation of fumes and mists. It is free from components of plant and/or animal origin and dangerous substances of any kind. It is inactive against copper and its alloys and can be easily removed from any petroleum distillate or alkaline washing. It is very stable to thermal-oxidative decay and if maintained at a temperature of < 60 °c It does not give rise in time to the formation of sludge, residues, lacquers (surface stains), glues, encrustations or other phenomena of such nature. It is inert and indeed carries out a protective action against both ferrous and non-ferrous materials, such as copper alloys and aluminium alloys.

Family: Automotive
Type: Synthetic based transmission oil

It is a synthetic-based fluid of latest generation for automatic transmissions. It is a premium product, able to pass all the performances requested by both European and American manufacturers of motor and industrial vehicles. In addition to falling within the parameters provided by the manufacturers' specifications, with particular reference to the coefficient of friction and viscosity, ATF HC DX III ROSSO features: - Excellent cold fluidity; - Very high Viscosity Index, for viscosities appropriate to all temperatures used in processes; - Excellent resistance to oxidation, thermal decay and aging to maximize service intervals; - Very high detergent-dispersant power; - Maximum level of anti-wear, anti-corrosion, anti-rust and antifoam properties.

Family: Automotive
Type: Mineral base transmission oil

It is a complex fluid, designed for power steering, automatic transmission gears, hydraulic clutches and oil couplings. Features: - outstanding lubrication in a very wide operating temperature range; - no cold starting problems; - friction minimization. In fact, it has very special friction properties, in addition to being particularly smooth and flowing easily, and possessing, a very high viscosity index, which allows this fluid to be used at the highest temperatures; - top functional stability over a long time period. In fact, it is extremely resistant to oxidation and foaming. Also, thanks to its high detergent and dispersant property, it prevents the formation of sludge and varnish and ensures a perfect compatibility with all elastomeric and synthetic gaskets. - gear and automatic mechanisms protection against wear and tear. - exceptional anti-wear and anticorrosion properties for an efficient and regular functioning of automatic transmission over a long time period.

Family: Automotive
Type: Synthetic based transmission oil

It is a fully synthetic hydrocarbon oil, of superior quality, for gearboxes and automatic transmissions, developed for heavy transport vehicles, especially when subjected to strenuous exertions of operation and when required prolonged intervals of replacement. It is used in particular to reduce the operating costs of vehicle fleet Operators. Performance: -extreme thermal-oxidative resistance, even at very low temperatures. -excellent behaviour both at low and very high temperatures. -A constant high level of adhesion of the clutch for the duration of use of the Oil. -exceptional protection against ageing and oxidation to prevent the formation of morchie, lacquer, deposits and to obtain the maximum life in Operation. -maximum anti-wear power for a reliable automatic transmission function even in the most demanding operating conditions for load and durability.

Family: Automotive
Type: Synthetic based transmission oil

It is a fully synthetic lubricating oil for automatic transmissions with continuous variation (cvt), both with metallic belt and metal Chain. It is a high performance product able to satisfy the needs of most of the changes with continuous variation of the cars of the Japanese Manufacturers. It can also be used in many cars equipped with continuous transmission of the "push belt" rotating Type. Has: -exceptional thermal-oxidative resistance and the formation of sludge and residues. -excellent fluidity at low temperatures. -excellent EP, wear-resistant, anti-corrosion, antirust and antifoam power for maximum durability and efficiency of transmission over Time. -maintenance of the correct coefficient of friction in all operating conditions, even the most difficult, for an optimal and constant transfer of Torque. -excellent stability of the oil at shear stability for the performance of the oil over Time. -complete compatibility with seals and elastomers commonly used in this type of automatic transmissions. Ensures: -excellent anti-vibration power for maximum driving comfort. -a Higher Safety Factor.

Family: Automotive
Type: Synthetic based transmission oil

It is a fully synthetic ATF OIL, specifically formulated for DSG-type automatic transmissions. It is a very high-performance oil designed for use in the latest generation oil-immersed DCT (Dual Clutch Transmissions) automatic transmissions. DCT technology with “electronic dual clutch gearbox”, initially introduced by the VAG group (Volkswagen / Audi Group), is now widely used, as it offers the possibility of a different and exceptionally comfortable driving style and a variety of fully electronically managed solutions. It is estimated that by 2025, double clutch transmissions in oil baths will be fitted to more than 12 million vehicles per year, more than double the number fitted today. It is characterized by a very smooth and fast speed change of a sporty type. ATF OIL SYNT DSG-2 ensures: -Exceptional corrosion protection on Copper, for the maximum duration in efficiency of all mechanisms -Excellent thermal-oxidative stability, which guarantees constant control of viscosity, maximum heat dispersion and maximum cleanliness of the kinematic mechanisms, for correct operation of the hydraulic system, clutches and gears during its service life. - Maximum lubricating power even in extreme operating conditions, both at low and high temperatures, to guarantee the efficiency of the mechatronics, the perfect functionality of the pump, the protection of the clutch and the constancy of the transmission torque, in the absence of vibrations and annoying screeches for the entire life of the transmission, for fast, smooth and silent shifting operations. -Extremely high anti-corrosion and anti-wear power even in severe operating conditions for high frequency changes and transport with heavy loads. -Excellent stability and resistance to shear stresses. -A very low pour point for maximum shifting efficiency even at the coldest temperatures. - A very high viscosity index for higher highly performance even at high temperatures. -Minimum foam formation even in all operating conditions. -Total compatibility with gaskets and elastomers commonly used by manufacturers. -Wide and robust coverage of all requests from most manufacturers of DCT automatic transmissions.

Prodotto ECO
Family: Special products
Type: Special product

It is a fluid, free from mineral oil, formulated for various applications. It is composed of the latest generation raw materials, consisting of a mixture of totally saturated and synthetic biodegradable esters, stabilized with appropriate additives. The hygienic-sanitary and environmental compatibility is very high. It guarantees: - absence of fumes and vapors in processing; - a high Flash Point, for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, whereby the oil disperses on surfaces quickly and uniformly; - good resistance to oxidation and rust; - good anti-wear power; - complete biodegradability; - maximum tolerability by operators as it does not contain harmful or irritating components. The product is free from chlorinated and / or sulfur compounds and does not contain polycyclic aromatic hydrocarbons (PAHs).

Family: Automotive
Type: Synthetic based transmission oil

It’s a hydrocarbon based lubricating oil totally synthetic, multi-functional, formulated for use in synchronised manual gearboxes and for "transaxle" gearboxes, especially when it is also required the carrying capacity of high loads. Guarantees: -maximum duration of clutch; -High E.P. Extreme Stress Resistance Pressures; -excellent thermal-oxidative stability; -Outstanding wear protection and gear cleaning for high quality automotive performance, with soft changes and a pleasant sense of driving; -suitability for use in a wide range of applications, for passenger cars and light commercial vehicles such as vans and pick-ups, intended for the transport of goods and people.

Family: Automotive
Type: Synthetic based transmission oil

It is fully synthetic based gear lubricant, designed to meet the most stringent operating requirements differential bridges with hypoidal gears and gearboxes mechanics with manual control. The particular and updated performance package used, gives strong antioxidant, anti-wear properties, anti-rust, antifoam, EP (Extreme Pressure), as well as outstanding thermal stability, excellent protection corrosion and excellent compatibility with synchronizers (also in Molybdenum or bronze) and with seals. It was formulated in view of the fact that the powers vehicle specifications are greatly increased by when devices such as intercoolers have been used in engines, turbocharger, variable timing, distribution multi-valve, direct injection and electronics. Such devices have brought an improvement in performance, but also a considerable increase in temperatures of operation, as well as increased mechanical stress transmissions of all vehicles. The transmissions often have different needs: differentials hypoids, used in rear-wheel drive vehicles, require lubricants with high EP characteristics (API level GL-5), while manual gearboxes require lubricants with lower EP characteristics (API level GL-4 or lower), but that keep in time the correct coefficient of friction, to safeguard the good functionality of the synchronizers. CD GEAR OIL SYNT SAE 75W-90 has been specifically formulated to meet the need for a lubricant for gears can meet the needs of both transmission types. It provides: -exceptional antioxidant, anti-rust, anti-foaming properties and EP; -reduction of wear phenomena, resulting in greater durability of vehicle components and reduction of vehicle costs maintenance and machine downtime; -effective resistance to the formation of lacquers, sludge, varnishes and deposits, for high and constant level of internal cleaning axles and transmissions; -excellent thermal stability; -excellent compatibility with gaskets, even at high temperatures, allowing the product to operate effectively without leakage and/or leakage; -very low sliding point; -excellent behaviour at low temperatures; -virtually instantaneous and effective lubrication of bearings and gears in cold starts; -High Viscosity Index; -total compatibility with synchronised transmissions (also in molybdenum and bronze); -excellent protection against corrosion.

Family: Industrial greases
Type: Grease

COMPLEX GREASE LI / EP B2 is a lubricating grease based on complex lithium soaps and additives that improve protection against wear and corrosion. Features: - long service life; - grease for extreme pressures; - suitable for high temperatures; - classification KPX2N-20 according to DIN 51502; - classification L-XBDHB2 according to ISO 12924.

Family: Industrial lubricants
Type: Synthetic compressors oil

It is an oil obtained from a synthetic hydrocarbon base, expressly formulated for the lubrication of the reciprocating and rotary compressors, with the following characteristics: - very high resistance to the oxidation, that ensures the maximum duration, without alterations in the structure; - minimum formation of carbon deposits and residues, essential to assure a perfect clean of all mechanical parts in movement and above all of the valves for an ideal efficiency of the compression; - natural high index viscosity and low pour point for a correct function of the compressors in every climatic condition; - effective protection against corrosion and rust; - high flash point and consequent low volatility that ensures reduced consumptions. It is compatible with mineral oils.

Family: Industrial lubricants
Type: Synthetic compressors oil

It is an oil obtained from a synthetic hydrocarbon base, expressly formulated for the lubrication of the reciprocating and rotary compressors, with the following characteristics: - very high resistance to the oxidation, that ensures the maximum duration, without alterations in the structure; - minimum formation of carbon deposits and residues, essential to assure a perfect clean of all mechanical parts in movement and above all of the valves for an ideal efficiency of the compression; - natural high index viscosity and low pour point for a correct function of the compressors in every climatic condition; - effective protection against corrosion and rust; - high flash point and consequent low volatility that ensures reduced consumptions. It is compatible with mineral oils.

Family: Industrial lubricants
Type: Synthetic compressors oil

It is an oil obtained from a synthetic hydrocarbon base, expressly formulated for the lubrication of the reciprocating and rotary compressors, with the following characteristics: - very high resistance to the oxidation, that ensures the maximum duration, without alterations in the structure; - minimum formation of carbon deposits and residues, essential to assure a perfect clean of all mechanical parts in movement and above all of the valves for an ideal efficiency of the compression; - natural high index viscosity and low pour point for a correct function of the compressors in every climatic condition; - effective protection against corrosion and rust; - high flash point and consequent low volatility that ensures reduced consumptions. It is compatible with mineral oils.

Family: Industrial lubricants
Type: Synthetic compressors oil

It is an oil obtained from high performance, fully synthetic hydrocarbon bases, expressly formulated for the lubrication of the reciprocating and rotary compressors, with the following characteristics: - very high resistance to the oxidation, that ensures the maximum duration, without alterations in the structure; - minimum formation of carbon deposits and residues, essential to assure a perfect clean of all mechanical parts in movement and above all of the valves for an ideal efficiency of the compression; - natural high index viscosity and low pour point for a correct function of the compressors in every climatic condition; - effective protection against corrosion and rust; - high flash point and consequent low volatility that ensures reduced consumptions. It is compatible with mineral oils.

Family: Industrial lubricants
Type: Synthetic compressors oil

It is an oil obtained from a synthetic hydrocarbon base, expressly formulated for the lubrication of the reciprocating and rotary compressors, with the following characteristics: - very high resistance to the oxidation, that ensures the maximum duration, without alterations in the structure; - minimum formation of carbon deposits and residues, essential to assure a perfect clean of all mechanical parts in movement and above all of the valves for an ideal efficiency of the compression; - natural high index viscosity and low pour point for a correct function of the compressors in every climatic condition; - effective protection against corrosion and rust; - high flash point and consequent low volatility that ensures reduced consumptions. It is compatible with mineral oils.

Family: Industrial lubricants
Type: Synthetic compressors oil

It is an oil obtained from a totally synthetic hydrocarbon base, expressly formulated for the lubrication of alternative and rotary compressors, with the following characteristics: -very High oxidation resistance, which guarantees the maximum duration of the charge, without alterations in the structure; -minimum formation of deposits and carbonous residues, essential to ensure perfect cleaning of all moving mechanical parts and especially of valves, for an ideal compression efficiency; -natural high viscosity index and low sliding point for the correct functioning of the compressors in any climatic condition; -effective protection against corrosion and rust; -high flash point and consequent low volatility that guarantees reduced consumption. It is compatible with mineral based oils.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat and fluid oil for mechanical operations. It is made of a mixture of a high selected and hydro-finished paraffin mineral base and a combination of E.P. sulphur additives: inactive, anti-oxidants, metal passivators and anti-fog. These additives explain a synergic action between them, creating a high performance product, particularly suitable for removal and cutting operations. Properties: - good cleaning and decanting power of the scraps, for a high level machine cleaning; - excellent E.P. cutting and anti-welding power; - very low tendence to foaming, even with high pressure jets; - excellent resistance to thermal-oxidative attack and aging, for very prolonged operation durations, in absence of sludge and residues; - a good degreasing power, for very high quality finishes with low tolerances; - a very reduced formation of fumes and oil mists; - a natural high viscosity index. It is free from Chlorine, chlorinated compounds and heavy metals.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat coolant for heavy-duty mechanical processes. It features low viscosity and is free from chlorine and heavy metals such as zinc and lead; it is composed of highly greasy and complex substances mixed with active/inactive sulphur-based EP additives. The product is made from a high-quality, refined and hydrogenated mineral base with low odour and very narrow distillation range to minimize fumes and mist formations. The product's cooling power is particularly efficient thanks to its fluidity, while the anti-welding and lubricant power is supported additives which work synergistically among each others and in a wide range of temperatures. It guarantees: - low tendency to foam formation, particularly with high-pressure oil jets or high-speed spindle rotation; - excellent cutting power for high quality finishes, even with highly alloyed steels; - Excellent anti-corrosive and anti-rust protection of any ferrous materials thanks to specific and exclusive metal passivators; - High detergency and easy chip decantation; It can be easily removed with any petroleum solvent or with alkaline washing. It is not irritant and is characterized by moderate odor.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat coolant, made from a mixture of white paraffinic mineral oil severely hydrogenated and mixed with anti-wear additives and extreme pressure phosphorous, active/inactive sulphuric, greasy, adhesive, stabilizers and anti-oxidant additives that exert a synergetic action among each others with strong anti-welding properties. These properties give the product an excellent anti-wear lubricant and a very high cutting power, especially for high-strength alloy and especially stainless steels processes. The product features a light colour and moderate odor; it appears fluid and has a very low braking tendency to fumes and mists formations. It does not contain chlorinated compounds.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a very fluid neat cutting oil. It is obtained from a mixture of solvent-refined mineral paraffinic bases and friction modifier greasing additives, composed by natural fatty acid esters, which have been modified and stabilized, and anti-oxidants. The product has a very moderate and pleasant odour, a high flash point and therefore a slight tendency to evaporation. Being very fluid, it has a high cooling property. The additives are aimed to improve the tools’ lifespan and the surface finishing, especially when processing brass.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Neat cutting mineral oil obtained from highly selected paraffinic bases, chlorine-free and with high cooling power. It features moderate odour and very low tendency to fumes and mists formations. It is free from dangerous substances of any kind. The color is clear and limpid. It is inactive towards copper and its alloys and can be easily removed with any chlorinated and / or petroleum solvent.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Mineral oil for cutting obtained from highly selected paraffinic bases, with excellent lubricating properties. The smell is moderate and very reduced the tendency of the formation of fumes and mists. It is free of dangerous substances of any kind. The color is clear and limpid. It is inactive against copper and its alloys and can be easily removed from any chlorinated and/or petroleum solvent.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Mineral cutting oil obtained from highly paraffinic bases selected, with high cooling power. The odor is moderate and very reduced the tendency to the formation of fumes and fog. It’s free of hazardous substances of any kind. The color is clear and clear. The antisealdant additive consists of a mixture of sulphur, chlorinated and oily compounds, such as to ensure effective synergistic action and at the same time good anti-corrosion protection. It is inactive against copper and its alloys and easily removable from any petroleum solvent or alkaline detergents.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a very fluid neat cutting oil. It is obtained from a mixture of highly refined and hydro-finished mineral paraffinic bases and active sulphur-based EP additives, stabilizers and anti-oxidants. The product has a moderate odour, a high flash point and therefore a slight tendency to evaporation. Being very fluid, it has a high cooling property. The additives are aimed to improve the tools’ lifespan and the surface finishing on high-resistance ferrous steel alloys. It is free from Chlorine and derivatives. It is light-coloured and may stain copper and its alloys.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Mineral oil for cutting obtained from a highly selected and hydrofinite, clear paraffinic base with a very narrow distillation cut; It is free of volatile fractions and is equipped with a very high flash point for maximum Safety. It has an optimum viscosity gradation to guarantee a good power both lubricant and refrigerant. The smell is very moderate and very reduced the tendency to the formation of fumes and mists, both for the characteristics of the mineral base and for the type of additivation used. The Antisaldante additive, which gives the product a clear light brown colour, is constituted by a mix of sulphated and chlorinated compounds, such as to guarantee an effective synerchical action and at the same time a good anticorrosive Protection. It is inactive against copper and its alloys.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a mineral cutting oil, obtained from a carefully selected and hydro-finished paraffinic base, with a very narrow distillation cut; for safety reasons, it does not contain volatile compounds and its flash point is very high. The very high viscosity is aimed to achieve the highest lubricating and cooling performances at the same time. It has a very slight odour. In addition, its mineral base’s properties and the additives contained, reduce the tendency to fumes formation. The anti-welding additives give the products its clear light brown colour. They are obtained mixing sulphur and chlorine compounds, which are very effective in inhibiting corrosion. This oil is inactive with copper and its alloys.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat cutting oil, obtained from a mixture of highly refined mineral oil with anti-wear and extreme pressure additives: it contains phosphorous and active/Inactive sulphur, untuosant, adhesive, stabilizers and antioxidants additives which have a strong synergistic action. These give the product an excellent anti-wear lubricity and a very high cutting power, especially in the machining of steel alloys and also stainless steel. The product is light coloured, fluid, smells moderate and has a low tendency to the formation of fumes and mists. It does not contain chlorinated compounds.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a full-strength coolant-cooling fluid, characterised by a high degree of fluidity and a strong anti-invasive EP power, given in particular by the massive presence of chlorinated compounds together with solfo-phosphates,greased and synthetic compounds, which are a synerget Action. It is very light, inactive, with anti-wear power and protected against oxidation and Corrosion. It is suitable for very tough stainless steel machining, especially when the fluidity and cooling power of the product is essential and where the use of chlorinated additives is indispensable. It is also used as a cutting supplement to compensate for loss of EP power due to the dilution effect of foreign oils in whole-cut oils.

Family: Neat cutting oils
Type: Neat cutting mineral oil

CUTEX 15/22 S-SA is a cutting oil, made from a mixture of an highly selected, paraffinic, clear and with a very restricted distillation cut base and synthesis esters and additives: - Greasy, with high performance; - Anti-welding; - Anti-oxidant, anti-corrosive and metallic passivators. CUTEX 15/22 S-SA guarantees: - An excellent refrigerating power of the pieces, both for its high grade fluidity and for synthesis esters’ nature and presence of greasy agents; - An elevate flash point, for an elevate safety standard; - An excellent lubricating, anti-welding and anti-wear power, obtained thanks to its properties and the synergism of the ingredients; - A moderate odor, well tolerated; - Chemical inertia to all metallic alloys, both ferrous and non-ferrous (yellow and Aluminum alloys in particular); - A very reduced and restrained tendency to smokes and fogs formation; - An excellent swarf decantation power, which ensures restricted times of drying, centrifugation and dripping; - A very high hygienic-sanitary compatibility level; - An efficient swarf crushing.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a multifunctional lubricant for loss-lubrication systems and cutting operations, made from a highly-selected clear and with a very narrow cut of distillation, paraffin base, mixed with synthetic esters and the following additives: -high-performance greasing agents -inactive sulphide-based and phosphorus compounds-based anti-welding agents -antioxidants, anticorrosive and metal deactivators. It guarantees: -good cooling power of the pieces, for its fluidity degree and the particular nature of the synthetic esters and the greasing additives -high flash point for a high safety standard -excellent lubricant, anti-aging and anti-wear power, achieved thanks to the properties and synergism of the components -moderate and well-tolerated odour -chemical inertia towards all metal alloys, both ferrous and non-ferrous (particularly yellow alloys and aluminium alloys) -very reduced tendency to fumes and mists formations -good scrap decanting power, which ensures limited drying times by both centrifugation and dripping -very high degree of hygienic-sanitary compatibility -effective scrap crushing.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a multifunctional oil for waste lubrication and cut obtained by the mixture of a highly selected paraffin base, clear and with a very narrow cut of distillation, with esters of synthesis and additives: -Untuosant, highly performance; -Antisaldants based on inactive sulphates and phosphorous compounds; -Antioxidants, anticorrosives and metal passivators. Guarantees: -A good cooling power of the pieces, thanks to the particular nature of the synthetic esters and the untuosant additives present; -A high flash point, for a high safety standard; -Excellent lubricant, anti-aging and anti-wear power, obtained thanks to the properties and synergism of the ingredients; -A very moderate smell, well tolerated; -Chemical inertia towards all metallic alloys, both ferrous and non-ferrous (yellow alloys and aluminium alloys in particular); -An exceptionally small and restrained tendency towards the formation of fumes and mists; -A very high degree of hygienic-sanitary compatibility; -Effective scrap crushing.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a lubricant-cooling fluid from cutting obtained from a mixture of paraffinic bases severely refined to the solvent and composed with: -highly stable chlorine-based additives of extreme pressure, -active and inactive sulphetized sulphur, -stabilizers and antioxidantthat include a synergetic action with strong no sealing properties. These, together with the high degree of fluidity of the base, confer on the product: -a very high cutting power, especially in the machining of high-strength and stainless steel alloy steels, for high quality surface finishes; -reduced volatility/atomation; -otiimo refrigerant and detergent power; -excellent decaying and removal of scraps. The product is dark in color and has a high level of tolerability for Operators.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is a viscous fluid, especially used in the cold drawing of ferrous materials. The chemical formulation and the high deformation efficiency of the product allow to carry out operations of drawing without "bonder", even of square and rectangular sections (in particular the heavier, flat ones), guaranteeing in any case: - an excellent surface finish, especially of the edges; - tight tolerances for long processing intervals; - protection of dies from wear. It is free from chlorine and chlorinated compounds.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a neat cutting oil, obtained from a mixture of highly refined mineral oil with anti-wear and extreme pressure additives: it contains phosphorous and Inactive sulphur, untuosant, adhesive, stabilizers and antioxidants additives which have a strong synergistic action. These give the product an excellent anti-wear lubricity and a very high cutting power, especially in the machining of steel alloys and also stainless steel. The product is light coloured, fluid, smells moderate and has a low tendency to the formation of fumes and mists. It does not contain chlorinated compounds.

Family: Industrial Fluids
Type: Degreasing industrial detergent

DECAL PLUS is a deoxidizing detergent, moderately acidic, containing a special mixture of inhibitors to prevent damage to parts steel and aluminium, used on aircraft. It does not have to be used on magnesium parts.

Prodotto ECO
Family: Industrial Fluids
Type: Degreasing industrial detergent

It is a highly concentrated, low-foam, water-based industrial detergent for the cleaning of iron, cast iron and steel mechanical parts, using machines for the specific washing of fatty substances, oils, hydrocarbons and derivatives, typical of the engineering industry. Prevents corrosion and rust formation on washed parts for a few weeks. The duration of the protection will depend on: drying, humidity, dust, aggressiveness conditions, etc., present in the storage and working environments. The product consists of a mixture of surfactants derived from natural extracts, easily biodegradable, and is addufied with anticorrosives specific for the protection against oxidation of ferrous material. For its characteristics, the product is recommended for use where washing is required with non-toxic or aggressive products. The product does not contribute to the introduction of VOC (volatile organic compounds) into the environment.

Family: Industrial Fluids
Type: Degreasing industrial detergent

It is an industrial water-based detergent, highly concentrated and with low foam formation tendency, used for iron, cast iron and steel mechanical pieces cleaning, through specific machines for industrial washing of greasy substances, oils, hydrocarbon and derivatives. For some weeks, DEOX ECO ALL prevents corrosion and rust formation on the washed pieces. The duration of the protection will depend on: drying, humidity, dust, aggression conditions, etc., which are present in the storage and work space. It is composed by a mixture of easy biodegradable natural extracts surfactants and it is additioned with anti-corrosive agents, which have specific oxidation protection on metals, particularly aluminium. Thanks to its characteristics, DEOX ECO ALL is recommended when washing with non-toxic and aggressive products is required. The product do not input any “VOC” (Volatile Organic Compounds) into the environment.

Family: Industrial lubricants
Type: Additive for water based products

It is a concentrated anti-foam product, particularly active and made of modified siloxanes. The product can be easily dispersed in water and does not cause problems in case of subsequent painting and surface treatment; it prevents foam formation in water-based solutions.

Family: Industrial Fluids
Type: EDM dielectric fluid

It is a fluid based on highly-refined isoparaffin hydrocarbons. It is colourless, odourless, inert and it does not contain aromatic compounds. It is especially suitable as dielectric fluid or as EDM fluid for plunge spark machining, especially for high-speed operations in stamps of medium or big size and stamps for high pressure die casting Dielectric 90 no cov guarntees: • Minimal losses through evaporation thanks to its high distillation point • Excellent decantation and filterability of metal fines (even using siliceous earth filters), excellent detergency of the erosion area mainly due to the high-fluidity degree of the product. Thanks to these features carbon particles, which usually cause voltaic arches, do not accumulate. In addition, the formation of voltaic arches cause bad surface finishing of the pieces and tool wearing • High speed of ionization and deionization due to small pauses between an impulse and the other. This reduces time employed to produce stamps, less wearing of both copper or graphite electrodes) resulting in the optimization of the EDM machine performances • Improvements of the environmental conditions thanks to the fact that the product is colourless and odourless. Moreover, operators have the opportunity to continuously check the machining process • High thermic conductibility to allow a rapid heat rejection • Excellent hygienic and environmental compatibility • Maximum security degree to minimize fire risks due to the particularly high flash point of the product • Great resistance to oxidation to reduce aging phenomena involving the product and lengthen its charge life The product does not contain organic volatile compounds (OVC). Therefore it satisfies the MD n° 44 dd. 16/01/2004 (legislation 1999/13/CE)

Prodotto ECO
Family: Industrial Fluids
Type: EDM dielectric fluid

It is an aliphatic, extremely low viscous, denatured with synthetic esters, no coloured and high-boiling fluid. It is free from aromatics, sulphur, chlorine, phosphorus, toluene, xylene, P.C.B., P.C.T. P.A.H. and benzol. This fluid has a very moderate and pleasant odour and a high flash point, particularly indicated as dielectric into EDM machines. Features: - ideal chemical-physical properties for the working environment: neither odours nor vapour and the continuous visibility during the operations; - excellent decantation and high filtration of scraps; - quick removal from the cutting area and cleaning of EDM machines; - high thermal conductivity, which allows a quick heat dispersion and an excellent cooling power; - high flash point, more than 105°C, in order to minimize the fire risk, even with hard roughing workings; - ideal dielectric properties with a restricted ionization to the working area: it avoids the electric arcs dispersion and in this way it ensures a greater precision and lower energy consumption; - very short ionization-deionization times, for high frequencies pulses and so high production rhythms, without short circuit and premature electrodes wear dangers; - excellent oxidation resistance, for a longer charge. It is not classified as Volatile Organic Compounds (VOC).

Prodotto ECO
Family: Automotive
Type: Concentrated antifreeze

It is a concentrated antifreeze liquid, to be mixed with water, for the preparation of anti-freeze and anti-corrosion solutions to be used in closed cooling circuits. Free from Monoethylene Glycol, it consists of pure Propylene Glycol with corrosion inhibitor additives, free from nitrites, amines and phosphates. It is therefore a product not only with a very low environmental impact, but also with high hygienic-sanitary compatibility, being non-toxic, free from health risks and therefore ideal for use in the food industry: the product does not need any labeling of danger, obligatory instead for anti-freezing based on Monoethylene glycol. It provides: - protection against corrosion of the metal parts of the cooling circuits, especially those in aluminum; - excellent compatibility with all the non-metallic components present in the circuit (gaskets, rubber ducts and sleeves, elastomeric materials, plastic, paint, etc.); - no gelling phenomenon during use or storage; - excellent heat exchange efficiency; - absence of foam; - high protection of the heat exchange surfaces, against corrosion and the formation of deposits and scale and for a better operating efficiency of pumps, thermostats, ducts, gaskets, sleeves and radiators; - absence of cavitation phenomena.

Prodotto ECO
Family: Special products
Type: Special product

It is a biodegradable lubro-detaching fluid, to be used in asphalt and/or cement concrete production companies. It is made from a mixture of natural and synthetic esters and non-ionic surfactants, which form a compound that can be easily dispersed in water. The product features excellent greasing and release properties and is non-aggressive and operator-friendly. It can also be used for saw blades lubrication, when mixed in water.

Family: Automotive
Type: Antifreeze liquid

It is a liquid ready for use, for the sealed cooling circuits of motor vehicles, permanent type. It consists of a mixture of 38% demineralized water and pure Ethylene Glycol, with stabilizing, antioxidant and anti-wear additives. It provides: - effective protection against freezing in winter up to -22 ° C; - a high boiling temperature, higher than that of water, to protect the circuit against potential overheating of the cooling circuit during very slow gears, especially in the summer months; - low evaporation of the mixture, with minimal top-ups; - absence of residues and limestone deposits and maximum cleaning of the pipes; - maximum heat exchange efficiency; - very effective protection against oxidation, rust and mechanical wear; - long life of the sleeves and gaskets.

Family: Automotive
Type: Antifreeze liquid

It is a liquid ready for use, for the sealed cooling circuits of motor vehicles, permanent type. It consists of a mixture of 50% demineralized water and pure Ethylene Glycol, with stabilizing, antioxidant and anti-wear additives. It provides: - effective protection against freezing in the winter period up to -36 ° C; - a high boiling temperature, higher than that of water, to protect the circuit against potential overheating of the cooling circuit during very slow gears, especially in the summer months. - low evaporation of the mixture, with minimal top-ups; - absence of residues and limestone deposits and maximum cleaning of the pipes; - maximum heat exchange efficiency; - very effective protection against oxidation, rust and mechanical wear; - long life of the sleeves and gaskets;

Family: Industrial greases
Type: Grease

GREASE CA AX 2 is an anhydrous calcium thickened lubricating grease based on a mineral oil. The grease contains antioxidants, corrosion inhibitors and EP/AW additives. The thickener, together with the special base oil blend, makes the product suitable for the lubrication of medium loaded bearings and in wet and corrosive environments. The lubricating grease has excellent adhesion and water resistance. GREASE CA AX 2 is a high quality multipurpose grease that can be used in both industrial and automotive applications. The grease is suitable for a wide range of plain and rolling bearings.

Family: Special products
Type: Special product

It is an anti-seize paste, formulated with mineral bases in combination with lithium soaps, micronized copper lamellar particles and special corrosion inhibitors, which give the GREASE CU a pompous appearance, a copper colour and the following properties: -high resistance to very high temperatures; -chemical inertia; -high adhesiveness and easy plasmability; -excellent resistance to water and corrosive agents, such as condensation, fumes, gas, etc.

Family: Industrial greases
Type: Grease

GREASE FU is a pharmaceutical petrolatum complying with the FDA (U.S.A.) standards and the most important national pharmacopoeias in the countries of the European Community. These include, in particular, the latest editions of the Italian official Pharmacopoeia (FUI IX Ed.) and that of federal Germany (DAB 10). It is white-snow, type with long fibre, of particular softne. It has a high colour stability and an ointment consistency coupled with low melting point values. It is odourless, tasteless, chemically and biologically inert.

Family: Industrial greases
Type: Grease

It is a special infuse grease, light beige, semi-synthetic with mixed PAO and mineral oil containing PTFE, for high and above all for low temperatures (-50 ° C + 200 ° c), non-toxic, particularly suitable for use in the food industry in case of accidental contact with Food. The ingredients that compose it, in fact, conform to the regulations F.D.A. (Food and Drug Administration), CFR, title 21 § 178.3570 Has the following characteristics: -excellent stability at low temperatures; -lubricating properties maintained even at low temperatures; -water and steam resistance; -exceptional resistance to ageing.

Family: Industrial greases
Type: Grease

It is a special fat, gradation NLGI 2, multipurpose, lithium complex, based on mineral oil severely refined solvent, of new generation. Main Features: -superior resistance to high temperatures and water-draining action; -excellent EP, anti-wear, antioxidant and antirust properties; -excellent pumpability, adhesiveness and thermal and mechanical stability; -excellent Lubricating Power. It is indicated for the lubrication of most industrial machinery operating in severe operating conditions for high loads, high temperatures and water presence. It is characterized by the presence of a specific additive with PTFE to improve its behaviour at low temperatures (facilitating for example the cold start) and to enhance its anti-wear properties.

Family: Automotive
Type: Grease

Multi-Purpose grease, gradation NLGI 3, consisting of lithium hydroxyhistearate with mineral oil with mixed base, obtained through a modern manufacturing process that gives it significantly higher properties than the common lithium fats. Has the following properties: -excellent mechanical stability, allowing long periods of operation even in conditions of maximum severity; -high anticorrosive power; -considerable Chemical stability; -very high degree of grease and adhesiveness; -excellent resistance to oxidation, ageing and water-draining action.

Prodotto ECO
Family: Industrial greases
Type: Grease

It is a lubricating grease, which uses a mixture of biodegradable esters as a base oil and a strictly selected anhydrous calcium soap as a thickener, with the addition of antioxidant additives, corrosion inhibitors and anti-wear. The product has been carefully designed to be environmentally friendly and technically suitable for the lubrication of wheels and train flanges. It guarantees: - excellent protection of the mechanical parts from oxidation and corrosion both in the presence of water and in a corrosive environment; - maximum efficiency even at extremely low operating temperatures; - excellent resistance to oscillating loads and high anti-wear power; - rapid biodegradability. GREASE RAIL BIO 000 is a latest generation product, of superior quality, with EAL environmental approval, for non-returnable applications. It is easily pumpable in modern centralized lubrication systems and exceeds the European Ecolabel specification

Family: Industrial greases
Type: Grease

An aluminium-based grease complex, of green colour, with a smooth, stringing appearance, with synthetic raw materials, which give the product exceptional adhesion and water resistance and high temperature characteristics. Ensures: -A very high degree of water repellency; -Exceptional adhesiveness, which prevents very efficiently the water-draining action even in the presence of a continuous and abundant flow. Guarantees significant extensions of the lubrication intervals.

Family: Industrial greases
Type: Grease

High quality grease, gradation NLGI 0, based on lithium soaps, multifunctional, obtained with synthetic bases. It has ointment appearance, is resistant to water both cold and hot, has a drip point of 190 ° C and can be used in a range of operating temperatures from-20 to + 90 ° C reversibly: that is, usable at temperatures very close to these values without losing the original features when it comes back to normal temperature. In addition to the formation of a lubricating veil, it protects against oxidation and corrosion, forming a seal in the bearings to prevent the ingress of impurities and solid materials into the housings or cages. In the preparation is subjected to a particular process of homogenization and air removal for which its structure is free of lumps and air bubbles, whose presence is always counterproductive for proper use. Presents: -exceptionchemical stabilit great adhesiveness and considerable resistance to high loads and mechanical stresses. It is formulated with special additives for extreme pressure of sulphur-phosphorus type that exalting the anti-friction properties of the grease make it suitable to withstand even at high temperatures very high specific pressures; -excellent resistance to oxidation; -excellent anti-wear, anticorrosion, rust-proof protection; -excelle adhesive power; -good resistance to water dilating action; -de operating temperature range; -excellent pumpability characteristics.

Family: Industrial greases
Type: Grease

High quality fat, gradation NLGI, based on lithium soaps, multifunctional, obtained with synthetic bases. It has a pompous appearance, is resistant to water both cold and hot, has a drip point of 190 ° C and can be used in a range of operating temperatures from-20 to + 110 ° C reversibly: That is, usable at temperatures very close to these values Without losing the original features when it comes back to normal temperature. In addition to the formation of a lubricating veil, it protects against oxidation and corrosion, forming a seal in the bearings to prevent the ingress of impurities and solid materials into the housings or cages. In the preparation is subjected to a particular process of homogenization and air removal for which its structure is free of lumps and air bubbles, whose presence is always counterproductive for proper use. Presents: -Exceptional chemical stability, great adhesiveness and considerable resistance to high loads and mechanical stresses. It is formulated with special additives for extreme pressure of sulphur-phosphorus type that exalting the anti-friction properties of the grease make it suitable to withstand even at high temperatures very high specific pressures; -Excellent resistance to oxidation; -Excellent anti-wear, anticorrosion, rust-proof protection; -Excellent adhesive power; -Good resistance to water dilating action; -wide operating temperature range; -Excellent pumpability characteristics.

Family: Industrial greases
Type: Grease

High quality grease, gradation NLGI 2, based on lithium soaps, multifunctional, obtained with synthetic bases. It has a pompous appearance, is resistant to water both cold and hot, has a drip point of 190 ° C and can be used in a range of operating temperatures from-20 to + 120 ° C reversibly: That is, usable at temperatures very close to these values without losing the original features when it comes back to normal temperature. In addition to the formation of a lubricating veil, it protects against oxidation and corrosion, forming a seal in the bearings to prevent the ingress of impurities and solid materials into the housings or cages. In the preparation is subjected to a particular process of homogenization and air removal for which its structure is free of lumps and air bubbles, whose presence is always counterproductive for proper use. Presents: -Exceptional chemical stability, great adhesiveness and considerable resistance to high loads and mechanical stresses. It is formulated with special additives for extreme pressure of sulphur-phosphorus type that exalting the anti-friction properties of the grease make it suitable to withstand even at high temperatures very high specific pressures; -Excellent resistance to oxidation; -Excellent anti-wear, anticorrosion, rust-proof protection; -Excellent adhesive power; -Good resistance to water dilating action; -Wide operating temperature range; -Excellent pumpability characteristics.

Family: Industrial greases
Type: Grease

High quality grease, Gradzione NLGI 3, based on lithium soaps, multifunctional, obtained with synthetic bases. It has a pompous appearance, is resistant to water both cold and hot, has a drip point of 190 ° C and can be used in a range of operating temperatures from-20 to + 120 ° C reversibly: That is, usable at temperatures very close to these values without losing the original features when it comes back to normal temperature. In addition to the formation of a lubricating veil, it protects against oxidation and corrosion, forming a seal in the bearings to prevent the ingress of impurities and solid materials into the housings or cages. In the preparation is subjected to a particular process of homogenization and air removal for which its structure is free of lumps and air bubbles, whose presence is always counterproductive for proper use. Presents: -Exceptional chemical stability, great adhesiveness and considerable resistance to high loads and mechanical stresses. It is formulated with special additives for extreme pressure of sulphur-phosphorus type that exalting the anti-friction properties of the grease make it suitable to withstand even at high temperatures very high specific pressures; -Excellent resistance to oxidation; -Excellent anti-wear, anticorrosion, rust-proof protection; -Excellent adhesive power; -Good resistance to water dilating action; -wide range of operating temperatures.

Family: Automotive
Type: Grease

It is a grease based on lithium, adhesive, stringing, water-repellent hydroxyhistearate. Presents: -drop point exceeding 180 °c; -Excellent resistance to oxidation; -High lubricating power, for the protection of the treated kinematisms; -Excellent mechanical stability, especially in the presence of vibrations, so it does not change its characteristics even if subjected to high loads and long cycles of work. It is easily pumpable. Protects the mechanical parts from water, rust, dust and excess noise.

Family: Special products
Type: Special product

It is a special grease, white translucent, silicone, suitable for high and low temperatures (-50 to + 250 ° C). Has: -Excellent water repellent properties; -Excellent thermal-oxidative stability even for long periods of use; -No smell and color; -Maximum sanitary tolerability. It is to be used in particular as Agent of antiadhesion, detachment and slipping in couplings not excessively loaded especially in the presence of plastic and rubber elements. It is harmless, not dirty and can also be used as an electrical insulator. It is not recommended to use it for the lubrication of rolling bearings.

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a highly fluid neat coolant, free from mineral oil and formulated for lapping, smoothing, chip removal and grinding processes on ferrous and non-ferrous materials. It is formulated with highly selected raw materials, consisting of saturated synthetic esters, with additives to enhance its cutting performance. The product is characterized very high hygienic and environmental compatibility. It features: - no fumes and vapours during the process; - high flashpoint for totally safe operations; - excellent fluidity even at low temperatures and exceptional wetting power, which ensures a quick and uniform spreading on the metal surface; - exceptional greasing, EP and lubro-detaching power, for high-quality finishes; - good anti-oxidation, anti-rust and anti-wear properties; - low temperature of the machined pieces; - well crushed and shredded scrap; - very reduced tendency of mists formations, particularly with the presence of high-pressure oil jets or high-speed spindle rotation; - Good anti-welding cutting power; - good biodegradability; - maximum tolerability for the operators. The product is free from chlorinated and / or sulfur compounds, and does not contain polycyclic aromatic hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip-removal applications on ferrous and non-ferrous materials. It is formulated with state-of-the-art raw materials, consisting of natural synthetic esters, refined with a unique method, and mixed with anti-oxidant and anti-rust additives and metallic passivators. Features: - absence of fumes and vapours during the process and very reduced tendency to the formation of mists, in particular in the presence of high pressures of the oil jets or high spindle rotation speeds; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - outstanding greasing, EP and detaching property for high quality finishes; - excellent resistance to oxidation, rust and non-ferrous alloys passivation; - good anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - good anti-welding cutting property; - biodegradability; - maximum tolerability by the operators. The product is free from chlorinated and sulphured compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat drawing oil

It is a neat coolant, free from mineral oil, formulated for chip removal operations of ferrous and non-ferrous materials. It is formulated with the latest generation raw materials, consisting of biodegradable, synthetic and natural esters refined with an exclusive method, mixed with antioxidant, anti-rust additives and metal passivators. It ensures: - absence of fumes and vapors during processing and reduced tendency for the formation of mists, in particular in the presence of high pressures of the oil jets or high rotation speeds of the spindles; - a high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power; - good greasing, EP and lubricating-release power for quality finishes; - excellent resistance to oxidation and rust and passivation of non-ferrous alloys; - good anti-wear power; - low temperature of the machined pieces; - well crushed and chopped waste; - good anti-welding cutting power; -high biodegradability; - maximum tolerability by the operators. The product is free from chlorinated and / or sulfur compounds and does not contain polycyclic aromatic hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat fluid lubricant, very fluid, clear, light brown in color, with a very moderate and pleasant smell, free from mineral oil, formulated for chip removal operations of ferrous and non-ferrous materials. It is obtained from a mixture of synthetic bases, consisting of totally saturated synthetic esters, biodegradable and highly stable to hydrolysis and oxidation, and to anti-soldering additives E.P. for Extreme Pressures of inactive sulfur type, antioxidants, rust inhibitors and metal passivators, which, by exerting a synergistic action, give rise to a product with exceptional performance. It guarantees: - absence of fumes and vapors in processing and formation of dry and crusty residues, even over time; - a high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, so the oil disperses quickly and uniformly on the metal surface; - excellent untuosant power; - exceptional cutting, EP and lubricant-release agent for very high quality finishes; - very high antiusur power; - excellent both resistance to oxidation and rust and passivation of non-ferrous alloys; - very reduced tendency to the formation of mists, in particular in the presence of high pressures of the oil jets or high spindle rotation speeds; - low piece temperature works; - well-crushed and broken pieces of waste; -biodegradabilità; - maximum tolerability on the part of operators. Harolbio 1/2 SI PLUS is free from chlorinated compounds, active sulfur compounds, Zinc and IPA (Polycyclic Aromatic Hydrocarbons).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat cooling lubricant, free from mineral oil, formulated for chip removal and grinding of ferrous and non-ferrous materials. It is formulated with the latest generation of raw materials, consisting of totally saturated synthetic esters, biodegradable, with additives to optimize cutting performance, antioxidants, anti-wear and, in particular, broad-spectrum metal passivators. It guarantees: - absence of fumes and vapors processing and reduced tendency to the formation of mists, in particular in the presence of high pressures of the oil jets or high spindle rotation speeds; - a high flash point for operations in absolute safety; - an excellent smoothness even at low temperatures and an exceptional wetting power, so that the oil disperses on the metal surface quickly and uniformly; -Excellent greasing power, EP and lubricant release agent for quality finishes; - good resistance to oxidation and rust; - excellent anti-wear power; - low temperature of the machined pieces; - well broken and broken fragment; - excellent cutting strength; -biodegradabilità; - high conductivity value; - maximum tolerability on the part of operators; The product is free from chlorinated compounds and does not contain polycyclic aromatic hydrocarbons (IPA).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a fluid neat coolant, free from mineral oil and designed for deep drilling processes of steel and alloy steel but also for chip removal operations on ferrous materials. It is formulated with innovative raw materials, constituted by biodegradable and highly-refined natural and synthetic esters, mixed with the following additives: anti-welding and EP (Extreme Pressure) active-inactive sulphide-based, zinc-free and anti-wear phosphorous-based, anti-oxidants, anti-rust and metal deactivators, which ensure exceptional performances by exerting a synergistic action among each others. It guarantees: -low fumes and vapour formations during the processes; extremely reduced tendency to mists formations, particularly with high-pressure oil jets or high-speed spindle rotation; -high flash-point for totally safe operations; -excellent fluidity even at low temperatures and exceptional wetting power, which allows the lubricant to quickly and uniformly disperse on the metal surface; -exceptional greasing power; -exceptional anti-welding, EP and lubro-detaching cutting power for high-quality finishes; -good resistance to oxidation and rust; -high anti-wear power; -low temperature of the machined pieces; -well-crushed and shredded scrap; -outstanding anti-welding cutting power; -biodegradability; -maximum tolerability for the operators. The product is free from chlorinated compounds and does not contain polycyclic aromatic hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It’s a neat cutting oil biodegradable based, fluid and free from mineral oil. It’s suitable for deep drilling, tapping and threading of steel and alloy steel but also for chip removal of ferrous materials. It’s a full synthetic lubricant, biodegradable esters based mixed with E.P. additives, antioxidant, antirust and metal passivators that creating between them a synergic action make a product with excellent performances. It guarantees: - Low formation of smoke and mist during the use; - Low formation of mist, even with high pressure or with high velocity spindle rotation; - High flash point for safety operations; - Excellent even with low temperature; - Excellent wettability; - Excellent greasy power; - Excellent anti-welding cutting power, EP and lubro detaching power for high quality finishes; - Good resistance to oxidation and rust formation; - Low temperature of the treated pieces; - well crushed and fragmented chip; - High biodegradability; - Maximum tolerability for the operato The product is free from chlorinated compounds and it doesn’t contain Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat drawing oil

It is a neat, fluid, free from mineral oil, formulated for chip removal and grinding operations of ferrous and non-ferrous materials. It is formulated with the latest generation raw materials, consisting of totally saturated, biodegradable synthetic esters, with anti-fog additives, antioxidants and, in particular, broad spectrum metal passivators. The hygienic-sanitary and environmental compatibility is very high. It ensures: - absence of fumes and vapors during processing; - a high flash point for absolute operations; - excellent smoothness even at low temperatures - an exceptional wetting power, whereby the oil is dispersed on the metal surface quickly and uniformly; - excellent greasing and lubricating-releasing power for quality finishes; - excellent properties of resistance to oxidation and rust as well as passivation of non-ferrous alloys; - good anti-wear power; - low temperature of the machined pieces; - well fractured and chopped waste; - good anti-welding cutting power; - reduced tendency to mist formation, in particular in the presence of high pressures of the oil jets or high rotation speeds of the spindles; - high biodegradability; - maximum tolerability by the operators. - maximum compatibility with yellow alloy. The product is essential from chlorinated and / or sulfur compounds, and does not contain polycyclic aromatic hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal and grinding operations on steels and steel alloys; it is suitable for non-ferrous materials. It is made of state-of-the-art raw materials, consisting in biodegradable saturated synthetic esters, mixed with anti-welding, EP (for Extreme Pressure) and anti-wear additives of active-inactive sulphide typology, zinc free anti-wears based on phosphorus compounds, antioxidants, antirust and metallic passivators, which which ensure exceptional performances by exerting a synergistic action one on each other. Features: - low fumes and vapours formation during the process; - high flash point for operations in complete safety; - excellent fluidity even at low temperatures and an exceptional wetting property, that ensures a quick and uniform spreading on the metallic surface; - exceptional greasing property; - exceptional anti-welding, EP and detaching cutting property, for high quality finishes; - good resistance to oxidation and rust; - very high anti-wear property; - low temperature of processed pieces; - well crushed and shredded scrap; - outstanding anti-welding cutting power; - biodegradability; - maximum tolerability by the operators. The product is free from chlorinated and does not contain polycyclic aromatic hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat cuttting oil, free from mineral oil, formulated for mechanical removal of ferrous and non-ferrous materials. It is formulated with the latest generation of raw materials, consisting of biodegradable synthetic esters, with EP anti-soldering additives, for Extreme Pressures and anti-wear, of phosphorus-type, Zinc-free, antioxidants, anti-rust and metal passivators, which, exercising an action between them synergistic, give rise to a product with exceptional performance. It guarantees: - reduced formation of fumes and vapors during processing and reduced tendency to the formation of mists, in particular in the presence of high pressures of oil jets or high spindle rotation speeds; - a high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, so the oil disperses quickly and uniformly on the metal surface; -excellent untosy power; - exceptional cutting, EP and lubricant-release agent for very high quality finishes; - excellent resistance to oxidation and rust; - very high anti-wear power; - low temperature of the machined pieces; - well broken and broken fragment; -biodegradability; - maximum tolerability on the part of operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (I.P.A.).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is made of a mixture of state-of-the-art raw materials, consisting of: - synthetic and biodegradable saturated esters; - anti-welding and EP (Extreme Pressure) active-inactive sulphide based additives; - zinc-free anti-wear phosphorous compounds; - anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - reduced fumes and vapours formation during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses quickly and uniformly on the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching cutting power for high quality finishes; - good resistance to oxidation and rust; - very high anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - good biodegradability; - maximum tolerability by the operators. - very reduced tendency to the formation of mists, in particular in the presence of high pressures of the oil jets or high spindle rotation speeds; The product is free from chlorinated compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is formulated with raw materials of latest generation, consisting of synthetic and natural esters refined with exclusive method, mixed with E.P. anti-heat additives for extreme pressures of active-inactive sulfurized type, polymers, anti-wear based on phosphorus compounds free from Zinc, antioxidants, anti-rust and metal passivators that exert a synergistic action, creating a product with exceptional performances. It guarantees: - reduced fumes and vapours formation during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses quickly and uniformly on the metallic surface; - excellent lubricating, adhesive and greasy property; - outstanding anti-welding, EP and detaching cutting power for high quality finishes; - good resistance to oxidation and rust; - very high anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - good biodegradability; - maximum tolerability of the operators as it does not contain harmful or irritating components. The product is free of chlorinated compounds.

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a mineral oil free neat coolant, formulated for chip removal and grinding operations on ferrous and non-ferrous metals. It is obtained from a mixture of synthetic bases, made of saturated synthetic esters, which are biodegradable and highly stable to hydrolysis and oxidation, in combination with anti-welding and EP (Extreme Pressure) inactive sulphide based additives, anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - absence of fumes and vapours during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching property for high quality finishes; - excellent resistance to oxidation, rust and non-ferrous alloys passivation; - good anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - biodegradability; - maximum tolerability by the operators. - very reduced tendency to the formation of mists, in particular in the presence of high pressures of the oil jets or high spindle rotation speeds; The product is free from chlorinated compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat fluid lubricant, very fluid, clear, light brown in color, with a very moderate and pleasant smell, free from mineral oil, formulated for chip removal operations of ferrous and non-ferrous materials. It is obtained from a mixture of synthetic bases, consisting of totally saturated synthetic esters, biodegradable and highly stable to hydrolysis and oxidation, and to anti-soldering additives E.P. for Extreme Pressures of inactive sulfur type, antioxidants, rust inhibitors and metal passivators, which, by exerting a synergistic action, give rise to a product with exceptional performance. It guarantees: - absence of fumes and vapors in processing and formation of dry and crusty residues, even over time; - a high flash point for operations in absolute safety - excellent smoothness even at low temperatures and exceptional wetting power, so the oil disperses quickly and uniformly on the metal surface; - excellent untuosant power - exceptional cutting, EP and lubricant-release agent for very high quality finishes; - very high antiusur power - excellent both resistance to oxidation and rust and passivation of non-ferrous alloys; - very reduced tendency to the formation of mists, in particular in the presence of high pressures of the oil jets or high spindle rotation speeds; - low piece temperature works - well-crushed and broken pieces of waste -biodegradabilità; - maximum tolerability on the part of operators. The product is free from chlorinated compounds, active sulfur compounds, Zinc and IPA (Polycyclic Aromatic Hydrocarbons).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat cutting coolant, free from mineral oil, formulated for chip removal operations of ferrous and non-ferrous materials. It is formulated with raw materials of latest generation, consisting in biodegradable synthetic and natural esters refined with a unique method, mixed with antioxidant, antirust and metallic passivators additives. It eatures: - no fumes and vapours while processing; - high flashpoint for safe operations; - excellent fluidity even at low temperatures and exceptional wetting property, that ensures a quick and uniform spreading on the metallic surface; - excellent greasing, EP and detaching property, for high quality finishes; - good oxidation, rust and non-ferrous alloys passivation resistance; - good anti-wear properties; - low temperature of processed pieces; - well crushed and shredded scrap; - excellent cutting and anti-welding property; - biodegradability; - maximum tolerability for operators because it does not contain either harmful or irritant components. The product is free from chlorinated and sulfur compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for smoothing and grinding applications on ferrous materials. It is formulated with state-of-the-art raw materials, consisting of natural synthetic esters, refined with a unique method, and mixed with anti-welding and EP (Extreme Pressure) inactive sulphide based additives, zinc-free anti-wear phosphorous compounds, anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - complete reduction of fumes and vapours formation during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching power for high quality finishes; - good resistance to oxidation and rust; - very high anti-wear property; - low temperatures of the processed pieces; - good biodegradability; - maximum tolerability by the operators, as it does not contain any harmful nor irritant compounds. The product is free from chlorinated compounds.

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat cooling lubricant, free from mineral oil, formulated for mechanical machining of chip removal of ferrous and non-ferrous materials. It is formulated with the latest generation raw materials, consisting of synthetic and natural biodegradable esters refined with an exclusive method, with EP anti-welding additives, for Extreme Pressures and anti-wear, of the phosphorated type without Zinc, antioxidants, anti-rust and metal passivators, which, by exercising a synergistic action between them gives rise to a product with exceptional performance. In fact, it ensures: - reduced formation of fumes and vapors during processing; - a high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, whereby the oil is dispersed on the metal surface quickly and uniformly; - excellent greasing power; - exceptional anti-welding cutting power, EP and lubricating-release agent for very high quality finishes; - excellent resistance to oxidation and rust; - very high anti-wear power; - low temperature of the machined pieces; - well crushed and chopped waste; -biodegradability; - maximum tolerability by the operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (I.P.A.).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal operations on ferrous and non-ferrous materials. It is formulated with raw materials, consisting of biodegradable synthetic and natural esters, mixed with anti-welding and EP (Extreme Pressure) active-inactive sulphide based additives, zinc-free anti-wear phosphorous compounds, anti-oxidants, anti-rust and metal passivators. It features: -low fumes and mists formations during the processes -high flash point for totally safe operations -excellent fluidity even at low temperatures and exceptional wetting power, which ensures a quick and uniform spreading of the lubricant on the metal surface -excellent greasing power -exceptional anti-welding, EP, cutting and lubro-detaching power, for high-quality finishes -good oxidation and rust resistance -extremely high anti-wear power -low temperature of the machined pieces -well crushed and shredded scrap -biodegradability -maximum tolerability for the operators The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is made of a mixture of biodegradable, synthetic and natural esters, refined with an exclusive method, in combination with anti-welding and EP (Extreme Pressure) inactive sulphide based additives, anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - absence of fumes and vapours during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching property for high quality finishes; - excellent resistance to oxidation, rust and non-ferrous alloys passivation; - high anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - biodegradability; - maximum tolerability by the operators. The product is free from chlorinated compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil and formulated for chip removal processes on ferrous and non-ferrous materials. It is made from a mixture of biodegradable, synthetic and natural esters, refined with an exclusive method, in combination with anti-welding and EP (Extreme Pressure) inactive sulphide based additives, anti-oxidants, anti-rust and metal passivators, which ensures exceptional performances by exerting a synergistic action among each others. It features: -reduced fumes and vapours formations during the processes; -high flash point for totally safe operations; -excellent smoothness even at low temperatures and outstanding wetting power, for which the oil quickly and uniformly disperses over the metal surface; -excellent greasing property; -great anti-welding, EP and lubro-detaching cutting power for high-quality finishes; -good resistance to oxidation, rust and non-ferrous alloys passivation; -very high anti-wear property; -low temperatures of the machined pieces; -well crushed and shredded scrap; -complete biodegradability; -maximum tolerability by the operators. The product is free from chlorinated and sulphured compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It's a neat cooling lubricant free from mineral oil, produced for chip removal operations for ferrous and non-ferrous metals. It's a set of natural oils refined with an exclusive method with: - E.P. additives; - antioxidants; - antiwear sulphonated compounds free from zinc; - antirust properties. It guarantees: - low fumes and mist formation during operation; - high flash point for operations in total safety; - excellent fluidity even with loww temperatures; - excellent wetty power making easier and uniform the dispersion of the oil on the treatement; - excellent antiwelding cutting power, EP and detaching power for high quality finishes; - good resistance to oxidation and rust; - low temperature of the treated pieces; - well shattered scrap; - totally biodegradable; - maximum tollerability for the operations, it does not contain harmful and irritant components. The product is free from chlorinathed compounds.

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is made of a mixture of biodegradable, synthetic and natural esters, refined with an exclusive method, in combination with anti-oxidants and anti-rust additives and metallic passivators. Features: - absence of fumes and vapours during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching property for high quality finishes; - good resistance to oxidation and rust; - no interaction with copper and/or its alloys - good anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - good biodegradability; - maximum tolerability by the operators. The product is free from chlorinated and sulphured compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat cooling lubricant, free from mineral oil, formulated for chip removal operations of ferrous and non-ferrous materials. It consists of a blend of synthetic and natural biodegradable esters refined with an exclusive method, with E.P. for Extreme Pressures of inactive sulfur type, anti-wear based on zinc-free phosphorous compounds, antioxidants, anti-rust and metal passivators, which exert a synergistic action between them, giving rise to a product with exceptional performance. In fact, it ensures: - absence of fumes and vapors in processing; - a high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and an exceptional wetting power, whereby the oil is dispersed on the metal surface quickly and uniformly; - excellent greasing power; - strong anti-welding cutting power, EP and lubricating-release agent for very high quality finishes; - excellent resistance to oxidation and rust and passivation of non-ferrous alloys; -high anti-wear power; - low temperature of the machined pieces; - well crushed and chopped waste; -biodegradability; - maximum tolerability by operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (I.P.A.)

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is made of a mixture of biodegradable, synthetic and natural esters, refined with an exclusive method, in combination with anti-welding and EP (Extreme Pressure) inactive sulphide based additives, anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - absence of fumes and vapours during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching property for high quality finishes; - good resistance to oxidation and rust; - very high anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - good biodegradability; - maximum tolerability by the operators. The product is free from chlorinated and sulphured compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal operations on ferrous and non-ferrous materials. It is made of a mixture of biodegradables natural oils, refined with a unique method and combined with antioxidants, antirust and metal passivators additives. It features: - no fumes and vapours during the process; - high flash point for safe operations; - an excellent fluidity even at low temperatures and an outstanding wetting property, which ensures a quick and uniform spreading on the metallic surface; - excellent greasing, EP and detaching property for quality finishes; - good resistance to oxidation and rust; - good anti-wear property; - low temperature of the processed pieces; - well crushed and shredded scrap; - excellent anti-welding cutting property; - biodegradability; - maximum tolerability by the operators. The product is free from chlorinated and/or sulphurous compound and does not contain polycyclic aromatic hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It’s a neat lubricant, free from mineral oil, specific for metal cutting operations and deformation of metal ferrous and non-metal ferrous with high anticorrosive protection. It’ made with a mixture of natural lubricants, highly refined, with antioxidant additives, antirust additives and metal passivators. HAROLBIO 5 A.R. ensures: - No fumes or vapor during operations; - High flash point for operations in total safety; - Excellent fluidity even with low temperatures; - Excellent wetting power; - Very high unctuous power; - Very high EP power; - Very high detaching power for high quality finishes; - Excellent anti-rust and antioxidant properties over treated pieces; - High anti-wear power; - Low temperature of treated pieces; - Well crushed and fragmented scrap; - Very high anti-welding cutting power; - Totally biodegradable; - Free from harmful components and irritant components; - Maximum tolerability for operators in terms of health and hygiene. The product is free from: - chlorinated and sulphur components; - PAH (Polycyclic Aromatic Hydrocarbons).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is made of a mixture of biodegradable and natural oils, refined with an exclusive method, in combination with anti-welding and EP (Extreme Pressure) inactive sulphide based additives, zinc-free anti-wear phosphorous compounds, anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching property for high quality finishes; - good resistance to oxidation and rust; - very high anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - good biodegradability; - maximum tolerability by the operators. The product is free from chlorinated compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a multi-functional lubricant, free from mineral oil and formulated both as a high-lubricity lubricant and as a neat coolant for chip removal, deformation and cold drawing processes of ferrous and non ferrous materials. It is constituted by a mixture of highly-refined natural biodegradable oils and anti-oxidant, anti-rust additives and metal passivators which give the lubricant excellent thermal and oxidative stability. The product is approved for use in the food industry, in case of accidental food contact, according to the NSF: H1 specification. It guarantees: -Absence of fumes and mists during the processes -High flash point for totally safe operations -Excellent smoothness even at low temperatures and exceptional wetting power, so that the oil quickly and evenly disperses on the metal surface -Excellent lubricity and EP and lubro-detaching power for quality finishings -Excellent resistance to oxidation and rust -Good anti-wear power -Low temperature of the machined pieces -Well shattered and fragmented scrap -Excellent anti-welding power -Good biodegradability -Maximum tolerability for the operators. The product is free from chlorine and/or sulphated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is made of a mixture of biodegradable and natural oils, refined with an exclusive method, in combination with anti-welding and EP (Extreme Pressure) inactive sulphide based additives, zinc-free anti-wear phosphorous compounds, anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - absence of fumes and vapours during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching property for high quality finishes; - good resistance to oxidation and rust; - very high anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - biodegradability; - maximum tolerability by the operators. The product is free from chlorinated compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a whole coolant, free from mineral oil, formulated for cutting operations of ferrous and non-ferrous materials. It is made up of a blend of natural, biodegradable oils, refined with an exclusive method, with anti-EP additives for extreme sulfated sulphurised pressures, anti-wear based on zinc-free phosphorated compounds, antioxidants, antirust and Metal passivators that, by exercising a synergo action, give rise to a product with exceptional performance. In fact it guarantees: -No fumes and vapours in productio -A high flash point for absolute safety operation -Excellent smoothness even at low temperatures and an exceptional wetting power, so that the oil is dispersed on the metal surface quickly and evenly; -Excellent untuosing power; -Exceptional anti-shearing power, EP and Lubro-release for high quality finishes; -good resistance to oxidation and ru -High anti-wear power; -Low temperature of machined parts; -well shattered and fragmented scra -Biodegradability -Maximum tolerability on the part of the operators. The product is free from chlorinated compounds and does not contain polycyclic aromatic hydrocarbons (I.P.A.)

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is made of a mixture of biodegradable and natural oils, refined with an exclusive method, in combination with anti-welding and EP (Extreme Pressure) inactive sulphide based additives, friction modifiers, highly polar greasing additives, anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching property for high quality finishes; - good resistance to oxidation and rust; - very high anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - good biodegradability; - maximum tolerability by the operators. The product is free from chlorinated compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Family: Industrial lubricants
Type: -

It is a biodegradable, free of mineral oil lubricant with a high Viscosity index, low volatility and high flash point. It is formulated with special esters of natural origin with an accurate additives package, ashless, to prevent oxidation,rust and foam.

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a whole lubricant coolant, very fluid, clear, of a light brown colour, of a very moderate and pleasant odour, free of mineral oil, formulated for removal of chips from ferrous and non-ferrous materials. It is obtained from a mixture of synthetic bases, consisting of totally saturated esters of synthesis, biodegradable and highly stable to hydrolysis and oxidation, and from anti-welding additives E.P. for Extreme Pressure of inactive sulphurate type, antioxidants, anti-rust and metallic passivators, which, by exerting a synergistic action between them, give rise to a product of exceptional performance. It guarantees: -absence of fumes and vapours during processing and of dry and crusty residues even over a long period of time; -a high flash point for safe operations; -a low coefficient of friction for a longer tool life; -greater capacity to remove heat and cooling of the workpiece; -excellent sliding even at low temperatures; -exceptional wetting power, so that the oil disperses on the metal surface of the machined parts quickly and evenly reaching even the most difficult spaces; -excellent lubricating power; -exceptional power anti-welding of cut, EP and lubricant-stripping for top quality finishes; -excellent resistance to oxidation and rust as well as passivation of non-ferrous alloys; -very reduced tendency to form fogs, especially in the presence of high oil jet pressures or high rotational speeds of the spindles; -crush well crushed and fragmented; -biodegradability; -maximum tolerability by operators. The specific additivation of HAROLBIO HERO ensures a further improvement in wettability of the workpiece/tool interface and improved heat removal. The product is free of chlorinated compounds, active sulphur compounds, Zinc and PAH (Polycyclic Aromatic Hydrocarbons).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a complete, fluid, mineral oil-free coolant, formulated for chip removal operations on ferrous and non-ferrous materials. It is formulated with latest generation raw materials, made up of biodegradable synthetic esters, mixed with EP anti-welding additives. for Extreme Pressures of active-inactive sulfur type, anti-wear based on zinc-free phosphorus compounds, antioxidants, anti-rust and metal passivators which, by exercising a synergistic action between them, give rise to an exceptional product performance. In fact, it guarantees: -reduced formation of fumes and vapors during processing; -a high flash point for absolutely safe operations; -a low friction coefficient for longer tool life; -greater ability to remove heat and cool of the worked piece; -excellent smoothness even at low temperatures; -exceptional wetting power, so the oil disperses on the metal surface of the pieces processed quickly and uniformly, reaching even the most difficult spaces; -excellent unctuous power; -exceptional anti-welding, cutting, EP and lubricating-release power for very high quality finishes; - excellent resistance to oxidation and rust; -minimal tendency to the formation of mists, particularly in the presence of high pressures of the oil jets or high spindle rotation speed; - well crushed and chopped waste; -biodegradability; -maximum tolerability by operators. The specific additives of HAROLBIO HERO guarantee a further improvement in the wettability of the piece/tool interface and a better heat removal capacity. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs)

Prodotto ECO
Family: Water-miscible Coolants
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, very fluid, clear, of light brown colour and very moderate and pleasant odour and free from mineral oil; it is formulated for chip removal processes of ferrous and non-ferrous materials. It is made from a mixture of synthetic bases, consisting of totally saturated biodegradable and highly stable to hydrolysis and oxidation synthetic esters and anti-welding EP additives for Extreme Pressure of the inactive sulphurate type, antioxidants, anti-rust and metal passivators, which, by exerting a synergistic action among each others, allow the product to achieve an exceptional performance. It guarantees: -absence of fumes and vapours during processing and of dry and crusty residues even over a long period of time; -a high flash point for safe operations; -a low coefficient of friction for a longer tool life; -greater capacity to remove heat and cooling of the workpiece; -excellent sliding even at low temperatures; -exceptional wetting power, so that the oil disperses on the metal surface of the machined parts quickly and evenly reaching even the most difficult spaces; -excellent lubricating power; -exceptional power anti-welding of cut, EP and lubricant-stripping for top quality finishes; -excellent resistance to oxidation and rust as well as passivation of non-ferrous alloys; -very reduced tendency to form fogs, especially in the presence of high oil jet pressures or high rotational speeds of the spindles; -crush well crushed and fragmented; -biodegradability; -maximum tolerability by operators. The specific additivation of HAROLBIO HERO ensures a further improvement in wettability of the workpiece/tool interface and improved heat removal. The product is free of chlorinated compounds, active sulphur compounds, zinc and PAHs (Polycyclic Aromatic Hydrocarbons).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a highly flowing neat coolant, free from mineral oil, formulated for chipping and grinding operations on ferrous and non-ferrous materials. It is formulated with raw materials of latest generation, consisting in wholly saturated synthetic esters, with additives to enhance cutting performance. It has a very high hygienic and environmental compatibility. Features: - no fumes and vapours during the process; - high flashpoint for safe operations; - excellent fluidity even at low temperatures and an exceptional wetting property, that ensures a quick and uniform spreading on the metallic surface; - exceptional greasing, EP and detaching property, for high quality finishes; - good anti-oxidation, antirust and anti-wear properties; - low temperature of processed pieces; - well crushed and shredded scrap; - good biodegradability; - maximum tolerability by the operators as it does not contain neither harmful nor irritating compounds. - very reduced tendency to the formation of mists, in particular in the presence of high pressures of the oil jets or high spindle rotation speeds; The product is free from chlorinated and/or sulphur compounds, and it does not contain polycyclic aromatic hydrocarbons (PAHs)

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

Neat cutting spray oil for spinnerets, tapping, threading, etc. free from mineral oil and made of highly refined and biodegradable natural oils. Features: - minimum fumes and vapours formation. Exceptionally lower compared to the traditional mineral oils for tapping; - excellent anti-welding property; - outstanding surface finishes; - maximum hygienic-sanitary and environmental compatibility.

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a whole lubricant, free from mineral oil, specifically formulated according to the technique of "minimal lubrication", for cutting operations of ferrous and non-ferrous materials. It consists of a blend of natural, biodegradable oils, refined with an exclusive method, with E.P. anti-glare additives for extreme active-inactive sulphate pressures, anti-wear based on zinc-free phosphorated compounds, friction modifiers, Highly polar, antioxidant, antirust and metal passivators, which, by exerting a synergo action, give rise to a product with exceptional performance. This formulation ensures a fine nebulization and the presence of a thin lubricant veil, with strongly anti-slipping characteristics, at the point of contact between the tool and the workpiece. Harolbio SPRAY SUPER EP therefore guarantees: -No fumes and vapours in production; -A high flash point for absolute safety operations; -Excellent smoothness even at low temperatures and an exceptional wetting power, so that the oil disperdes on the metal surface quickly and evenly, with a very thin layer; -Excellent untuosing power; -Exceptional anti-shearing power, EP and Lubro-release for high quality finishes; -good resistance to oxidation and rust; -High anti-wear power; -Low temperature of machined parts; -well shattered and fragmented scrap; - Biodegradaitydbil -Maximum tolerability on the part of the operators because it has no hazard classification. The product is free from chlorinated compounds and does not contain polycyclic aromatic hydrocarbons (I.P.A.)

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a clear cut oil, of a light brown colour, of a very moderate and pleasant odour, free from mineral oil, obtained from a mixture of synthetic bases, constituted by saturated esters which have been prevented from being biodegradable, strongly stable to hydrolysis and oxidation, and by E.P.-phosphate-sulphated cutting additives. Presents: -A very high cutting and anti-sealing power; -High resistance to volatilization, despite the high fluidity; -Excellent oily lubricant power even at high temperatures; -High refrigerant power; -Maximum hygienic-sanitary compatibility; -Very high flash point. Features: -Surface finishes of the highest quality level; -Tool life, machining speed and advancements that are much greater and not comparable with those obtained with mineral-based cutting oils; -Smokiness and mists formations during extremely low machining; -Absence of dry and cruous residues even for a long time. It is free of chlorine, zinc and PAH (polycyclic aromatic hydrocarbons).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a whole coolant, free from mineral oil, formulated for cutting operations of ferrous and non-ferrous materials. It consists of a mixture of saturated synthetic esters, refined with an exclusive method, with anti-slip additives E.P. for extreme pressures, antioxidants, antirust and metal passivators that, by exerting a synergetic action, give rise to a product by outstanding performance. In fact it guarantees: -No fumes and vapours in production; -A high flash point for absolute safety operations; -Excellent smoothness even at low temperatures and exceptional wetting power, so that the oil dissipates on the metal surface quickly and evenly; -Excellent untuosing power; -Exceptional anti-shearing power, EP and lubro-release for high quality finishes; -good resistance to oxidation and rust; -High anti-wear power; -Low temperature of machined parts; -well shattered and fragmented scrap; -Biodegradability; -Maximum tolerability on the part of operators because it contains neither harmful nor irritant components. - very reduced tendency to the formation of mists, in particular in the presence of high pressures of the oil jets or high spindle rotation speeds; The product is free from chlorinated compounds and active sulphates.

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is made of a mixture of biodegradable and saturated synthetic esters, in combination with anti-welding and EP (Extreme Pressure) additives, anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - absence of fumes and vapours during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching property for high quality finishes; - good resistance to oxidation, rust and non-ferrous alloys passivation; - very high anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - biodegradability; - maximum tolerability by the operators. The product is free from chlorinated and sulphured compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a neat coolant, free from mineral oil, formulated for chip removal applications on ferrous and non-ferrous materials. It is made of a mixture of biodegradable and saturated synthetic esters, in combination with anti-welding and EP (Extreme Pressure) additives, anti-oxidants, anti-rust and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - absence of fumes and vapours during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing property; - outstanding anti-welding, EP and detaching property for high quality finishes; - good resistance to oxidation, rust and non-ferrous alloys passivation; - very high anti-wear property; - low temperatures of the processed pieces; - well crushed and shredded scrap; - biodegradability; - maximum tolerability by the operators. The product is free from chlorinated and sulphured compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Neat cutting oils
Type: Biodegradable-based neat cutting lubricant

It is a clear cut oil, of a light brown colour, of a very moderate and pleasant odour, free from mineral oil, obtained from a mixture of synthetic bases, constituted by saturated esters which have been prevented from being biodegradable, strongly stable to hydrolysis and oxidation, and by E.P.-phosphate-sulphated cutting additives. Presents: -A very high cutting and anti-sealing power; -high resistance to volatilization; -Excellent oily lubricant power even at high temperatures; -Good refrigerant power; -Maximum hygienic-sanitary compatibility; -Very high flash point. Features: -Surface finishes of the highest quality level; -Tool life, machining speed and advancements that are much greater and not comparable with those obtained with mineral-based cutting oils; -Smokiness and mists formations during extremely low machining; -Absence of dry and cruous residues even for a long time. It is free of chlorine, zinc and PAH (polycyclic aromatic hydrocarbons).

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based slideways oil

It is a biodegradable lubricant, with a high viscosity index, for the loss lubrication of slides and ways. It is formulated with particular esters of natural origin and with a neat package of ashless additives against wear, oxidation, rust and foam. Features: - high viscosity index thanks to its base’s mechanical strenght, without addition of improving additives, for a constancy in performance even in extreme operating conditions; - very natural low pour point; - excellent protection against wear, corrosion, rust and foam; - great EP and anti-stick-slip property; - compatibility with all metals and their alloys used in normal machinery; - biodegradability; It is compatible with the best quality elastomers commonly available on the market such as: - fluorinated rubber (for example Viton); - PTFE (for example Teflon); - acrylonitrile butadiene rubber (high nitrile): NBR-HNBR; - fluorosilicone rubber; - silicone rubber or other rubbers still compatible with esters.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based slideways oil

It is a biodegradable oil, free from mineral oil, with a high viscosity index, particularly suitable for the waste lubrication of the guides and sliding slides. It is formulated with the latest generation raw materials, consisting of synthetic and natural biodegradable esters, refined with an exclusive method, and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It presents: -a high viscosity index with high mechanical strength and proper of the base used, without the addition of additives, for a performance consistency even in harsh conditions of operation; -A very low natural sliding point; -Exceptional protection against wear, corrosion, rust, foam; -An excellent power EP and anti stick-slip; -Compatibility with all metals and their alloys used in normal machinery; -Biodegradability. It is compatible with the best quality elastomers commonly found on the market such as: -fluorurated rubber (e.g. Viton); -PTFE (e.g. Teflon); -Butadiene Rubber acrylamnitrile (High nitrile): NBR-HNBR; -Fluorosiliconic rubber; -Silicone rubber, or other tyres, however, compatible with natural and synthetic esters.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based slideways oil

It is a biodegradable oil, free from mineral oil, with a high viscosity index, particularly suitable for the waste lubrication of the guides and sliding slides. It is formulated with the latest generation raw materials, consisting of synthetic and natural biodegradable esters, refined with an exclusive method, and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It presents: -a high viscosity index with high mechanical strength and proper of the base used, without the addition of additives, for a performance consistency even in harsh conditions of operation; -A very low natural sliding point; -Exceptional protection against wear, corrosion, rust, foam; -An excellent power EP and anti stick-slip; -Compatibility with all metals and their alloys used in normal machinery; -Biodegradability. It is compatible with the best quality elastomers commonly found on the market such as: Fluorurated rubber (e.g. Viton); -PTFE (e.g. Teflon); -Butadiene Rubber acrylamnitrile (High nitrile): NBR-HNBR; -Fluorosiliconic rubber; -Silicone rubber, or other tyres, however, compatible with natural and synthetic esters.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based slideways oil

It is a biodegradable oil, free from mineral oil, with a high viscosity index, particularly suitable for the waste lubrication of the guides and sliding slides. It is formulated with the latest generation raw materials, consisting of synthetic and natural biodegradable esters, refined with an exclusive method, and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It presents: -a high viscosity index with high mechanical strength and proper of the base used, without the addition of additives, for a performance consistency even in harsh conditions of operation; -A very low natural sliding point; -Exceptional protection against wear, corrosion, rust, foam; -An excellent power EP and anti stick-slip; -Compatibility with all metals and their alloys used in normal machinery; -Biodegradability. It is compatible with the best quality elastomers commonly found on the market such as: Fluorurated rubber (e.g. Viton); -PTFE (e.g. Teflon); -Butadiene Rubber acrylamnitrile (High nitrile): NBR-HNBR; -Fluorosiliconic rubber; -Silicone rubber, or other tyres, however, compatible with natural and synthetic esters.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based slideways oil

It is a biodegradable lubricant, with a high viscosity index, for the loss lubrication of slides and ways. It is formulated with particular esters of natural origin and with a neat package of ashless additives against wear, oxidation, rust and foam. Features: - high viscosity index thanks to its base’s mechanical strenght, without addition of improving additives, for a constancy in performance even in extreme operating conditions; - very natural low pour point; - excellent protection against wear, corrosion, rust and foam; - great EP and anti-stick-slip property; - compatibility with all metals and their alloys used in normal machinery; - biodegradability; It is compatible with the best quality elastomers commonly available on the market such as: - fluorinated rubber (for example Viton); - PTFE (for example Teflon); - acrylonitrile butadiene rubber (high nitrile): NBR-HNBR; - fluorosilicone rubber; - silicone rubber or other rubbers still compatible with esters.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based slideways oil

It is a biodegradable lubricant, with a high viscosity index, for the lubrication to lose of the guides and of the sliding slides. It is formulated with biodegradable esters of synthetic and natural origin, refined with an exclusive method, with an accurate package of ash-free additives against wear, oxidation, rust and foam. It guarantees: -a high viscosity index with a high mechanical strength of the base used, without the addition of additives, for a performance consistency even in harsh operating conditions; -A very low natural sliding point; -Exceptional protection against wear, corrosion, rust, foam; -An excellent power EP and anti stick-slip; -Compatibility with all metals and their alloys used in normal machinery; -Biodegradability. It is compatible with the best quality elastomers commonly found on the market such as: -fluorurated rubber (e.g. Viton); -PTFE (e.g. Teflon); -Butadiene Rubber acrylamnitrile (High nitrile): NBR-HNBR; -Fluorosiliconic rubber; -Silicone rubber, or other tyres that are otherwise compatible with foreign.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It’s a grinding and honing lubricant made with high refined raw material, low viscosity and free from PAHs. The product has: - Low odor - Specific esters - Synthetic fatty acids esters and inhibitors oxidation These properties make it high resistant to aging.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a hydrocarbon-based fluid, for mechanical grinding and smoothing processes, with low viscosity, free from aromatics, formulated with raw materials with a very high degree of refining and with a very narrow distillation cut. It is a product with a very moderate odor, low volatility, formulated in a mixture with esters of synthetic fatty acids, specific additives and oxidation inhibitors, which, by exerting a strongly synergistic action, make it extremely resistant to aging. HONING 09 ensures: - excellent surface finishes; -strong reduction of Cobalt dissolution: -high anti-corrosive protection; - extraordinary ability to separate the air (air release); -very effective heat removal.

Family: Special products
Type: Special product

DESCRIPTION HOT GLASS 6 GF is a mould glue based on polymer resins that gives excellent adhesiveness, allowing cork powders or sawdust to be captured and after a thermal reaction it forms a strong and long-lasting coating, thanks to the presence in the formulated of fine and controlled grain size graphite.

Family: Special products
Type: Special product

It is a graphited paste, of black colour, used in die casting processes and particularly suitable for pistons lubrication. It is made from higly selected and solvent-refined mineral bases, a high micronized colloidal graphite content and mixed with additives which exert among each others a synergic effect. It especially guarantees: - Exceptional lubricant properties, even at the highest temperatures - Great stability against deposits and sediments formations - Excellent adhesive, anti-welding and release capacity - Prevention and reduction of wear in the moulds - Low smoke and lesser consumes

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a highly selected and hydrophilic mineral-based hydraulic oil, with a high viscosity index, for hydraulic controls, gears and kinematics in general, in all those cases in which the severe operating conditions require a lubricant with anti-wear properties, which reduces minimum mechanical wear of pumps, valves and mechanical moving parts. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve sticking, metal removal and filterability problems; it also meets the needs of the heaviest work cycles and resists oxidative decay at high operating temperatures. Ensures: - strong protection of the pumps, even in severe operating conditions; - superior viscoelastic resistance to intermittent loads; -excellent control of paints in very long duration tests; - very high resistance to oxidation in the TOST test; - remarkable hydrolytic stability.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high viscosity index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and Detergents-dispersants. It is classified Hvlp-D and therefore differs from normal hydraulic oils (labeled Hvlp) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, i.e. without losing its Features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. It also guarantees: -detergent and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; -reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic Hvlp-D 22 can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the Hydraulic Hvlp-D 46 keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system ITSELF. Finally possesses a very high viscosity index for: -reduce the viscosity loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; -improve the viscoelastic response of the oil to intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high viscosity index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and Detergents-dispersants. It is classified HVLP-D and therefore differs from normal hydraulic oils (labeled HVLP) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, i.e. without losing its features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. It also guarantees: - detergent and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; - reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic HVLP-D 32 can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the Hydraulic HVLP-D 46 keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system ITSELF. Finally possesses a very high viscosity index for: - reduce the viscosity loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; - improve the viscoelastic response of the oil to intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high light index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and Detergents-dispersants. It is classified Hvlp-D and therefore differs from normal hydraulic oils (labeled Hvlp) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, I.E. without losing its Features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. It also guarantees: -behavior and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; -reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic Hvlp-D 46 can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the Hydraulic Hvlp-D 46 keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system ITSELF. Finally possesses a very high light index for: -reduce the light loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; -improve the evoluted response of the oil to sunny load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high viscosity index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and detergents-dispersants. It is classified Hvlp-D and therefore differs from normal hydraulic oils (labeled Hvlp) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, i.e. without losing its Features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. Consists Of: -mineral bases having a very narrow cut of distillation, severely refined to the solvent and highly selected with regard to both the starting crude and the refining process, which involves a final treatment with hydrogen; -additives that confer superior anti-wear properties, protection of eps, antioxidants, antirust, anticorrosive, antifoam and "air release" of maximum quality, zinc-free, of "ashless" type. It also guarantees: -excellent dispersiveness, detergent and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; -reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic Hvlp-D 46 ZF can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the HYDRAULIC Hvlp-D 46 ZF Keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system itself. Finally possesses a very high viscosity index for: -reduce the viscosity loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; -improve the viscoelastic response of the oil to intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high Viscosity Index, for hydraulic controls, with marked anti-wear characteristics, antioxidants, anti-corrosion and detergent-dispersants. It is classified as HVLP-D and therefore differs from normal hydraulic oils (classified as HVLP) due to the fact that, instead of having demulsifying properties (ie of rapid separation from water), it can absorb up to 0.25% p of water without problems, that is, without losing its characteristics. It also has a high capacity to eliminate air ("Air Release" property), to prevent the formation of foam and to be filtered even at low micrometries. It also guarantees: - cleaning and cleaning of the hydraulic circuit and valves, preventing the formation of sticky residues, even in the presence of water; - reduced wear on the gaskets, improving the lubrication of the elastomer-metal contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in the control valves and in the cylinders of the hydraulic circuits of the machine tools can be advantageously counteracted as a consequence of the contamination by the cooling lubricant fluids. HYDRAULIC HVLP-D 68 can also avoid the effects of a potentially lacking lubrication due to the separation of water from the hydraulic oil, in systems with small reserves or with high oil circulation times, such as in mobile equipment. The characteristics of this oil also provide increased anti-stick-slip properties, reducing friction and wear. The detergent and dispersant properties of the Hydraulic HVLP-D 46 keep the impurities in suspension in the oil, to favor their eventual removal by the filtering system. As a result, it may be necessary in some cases to improve the capacity of the filtering system itself. Finally, it has a very high Viscosity Index for: - reduce the loss of viscosity in the presence of high temperatures and thus guarantee the efficiency of the power transmission system; - improve the viscoelastic response of the oil to intermittent load stresses.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil with high viscosity index, for hydraulic controls, with strong anti-wear characteristics, antioxidants, anticorrosive and Detergents-dispersants. It is classified Hvlp-D and therefore differs from normal hydraulic oils (labeled Hvlp) for the fact that, instead of having demulsive properties (I.E. rapid separation from water), it can absorb up to 0.25% p of water without problems, i.e. without losing its Features. It also presents high capacity to eliminate air (property "air Release"), to prevent the formation of foam and to be filtered even at low micrometrie. Consists Of: -mineral bases having a very narrow cut of distillation, severely refined to the solvent and highly selected with regard to both the starting crude and the refining process, which involves a final treatment with hydrogen; -additives that confer superior anti-wear properties, protection of eps, antioxidants, antirust, anticorrosive, antifoam and "air release" of maximum quality, zinc-free, of "ashless" Type. It also guarantees: -excellent dispersiveness, Detergent and cleaning of the hydraulic circuit and the valves, preventing the formation of sticky residues, even in the presence of water; -reduction of the wear of the seals, improving the lubrication of the Elastomer-metal Contact. Thanks to these properties, the particularly dangerous effects of sticky deposits in control valves and cylinders of machine tool hydraulic circuits can be advantageously contradged, as a result of Contamination by Coolant-coolant FLUIDS. Hydraulic Hvlp-D 68 ZF can also avoid the effects of a potentially deficient lubrication due to water separation from hydraulic oil, in systems with small reserves or with high oil circulation times, as in mobile Equipment. The characteristics of this oil also provide increased anti-stick-slip properties, with reduced friction and wear. The cleansing and dispersing properties of the HYDRAULIC Hvlp-D 46 ZF Keep the impurities in suspension in the oil, to facilitate their removal by the filtering System. As a result, it may be necessary in some cases to improve the capacity of the filter system itself. Finally possesses a very high viscosity index for: -reduce the viscosity loss in the presence of high temperatures and thus ensure the efficiency of the power transmission system; -improve the viscoelastic response of the oil to intermittent load stresses.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a hydraulic oil for hydraulic controls, consisting of a blend of biodegradable natural oils, refined with an exclusive method, free from mineral oil, formulated with additives against wear, oxidation, rust and foam and metal passivators. It is characterized by an exceptional lubricating power, which reduces the coefficient of friction between the moving mechanical parts of bearings, gears, bushings and kinematisms in general, and therefore the mechanical wear of pumps, valves, etc. It is "Zinc free", i.e. free of Ashes ("ashless"). Its use does not produce harmful effects on metals and standard elastomers already compatible with mineral oil. It does not require special precautions for its handling, as it is not classified as hazardous to health and does not have exposure limits (TLV: Threshold limit value). Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with mineral-based hydraulic oils. It possesses a very high viscosity index of its own (i.e. without the addition of specific additives), which permits its use within vast ambient thermal intervals of operation, remaining constant over time. Presents: -A very low natural pour point; -Exceptional protection against wear, corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a hydraulic fluid for hydraulic controls, consisting of a mixture of biodegradable natural oils, refined with an exclusive method, free from mineral oil and formulated with anti-wear, anti-oxidation, anti-rust, anti-foam additives and metal passivators. It is characterized by an exceptional lubricating power, which reduces the friction coefficient between the moving mechanical parts of bearings, gears, bushings and kinematisms in general and, therefore, the mechanical wear of pumps, valves, etc. It is "zinc free" and so ashless. It is a flame resistant oil, "self-extinguishing" and formulated to reduce the potential fire hazard. Its use does not produce harmful effects on metals and standard elastomers already compatible with mineral oil. It does not require special precautions for its handling, as it is not classified as hazardous to health and does not have exposure limits (TLV: Threshold Limit Value). Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with mineral-based hydraulic oils. It possesses a very high viscosity index of its own (i.e. without the addition of specific additives), which allows its use within large environmental thermal ranges, maintaining itself constant over time. It features: - A natural low-slip point; - Exceptional protection against wear, corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a hydraulic fluid for hydraulic controls, consisting of a mixture of biodegradable natural oils, refined with exclusive method, free from mineral oil, formulated with anti-wear, anti-oxidation, anti-rust and anti-foam additives and metal passivators. It is characterized by an exceptional lubricating power, which reduces the friction coefficient between the moving mechanical parts of bearings, gears, bushings and kinematics in general and, therefore, the mechanical wear of pumps, valves, etc. It is "zinc free", ie free ashless. It is a flame-resistant, "self-extinguishing" oil, formulated to reduce the potential risk of fire. Its use does not produce harmful effects on metals and standard elastomers already compatible with mineral oil. It does not require special precautions for its handling, as it is not classified as dangerous for health and does not have exposure limits (TLV: Threshold Limit Value). Vapors developed in contact with surfaces at high temperatures are harmless, contrary to what happens with mineral-based hydraulic oils. It is characterized by a very high viscosity index, which allows it to be used within large thermal ranges, maintaining itself constant over time. It features: - a naturally low pour point; - exceptional protection against wear, corrosion, rust and foam; - compatibility-mixability in all percentages with mineral-based lubricants.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a hydraulic oil for hydraulic systems, composed of a mixture of natural biodegradable oils, free from mineral oils, refined using an exclusive method and formulated with metal deactivators and additives to prevent wear, oxidation, rust and foam. It is characterized by an exceptional lubricating power that reduces the friction coefficient between the moving mechanical parts in bearings, gears, bushings and kinematic systems overall and thus the mechanical wear of pumps, valves, etc. It is Zinc free, so ashless. It is a flame resistant oil, self-extinguishing, formulated to reduce the potential risk of fire. Its usage does not produce damaging effects on metals or on the standard elastomers already compatible with mineral oils. It does not require special precautions for its handling as it has not been classified as hazardous to health and has no exposure limits (TLV: threshold limit value). Mist that develop in contact with the surfaces at high temperatures are harmless, unlike with mineral-based hydraulic oils. It has a very high Viscosity Index, which allows its usage within wide environmental temperature ranges, remaining constant over time. It presents: - A natural low pouring point; - An exceptional protection against wear, corrosion, rust and foam; - Compatibility-miscibility at every percentage with mineral-based lubricants.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a hydraulic oil for hydraulic controls, consisting of a blend of biodegradable natural oils, refined with an exclusive method, free from mineral oil, formulated with additives against wear, oxidation, rust and foam and metal passivators. It is a flame resistant oil, "self-extinguishing", formulated to reduce the potential fire hazard. It presents in particular an excellent resistance to thermal and oxidative decay, obtained by means of a combination of unique and synerloptic additives, specifically studied and tested, which make it qualitatively superior to hydraulic oils and Even mineral-based, very widespread and of a good quality level, normally present on the market. It is characterized by an exceptional lubricating power, which reduces the coefficient of friction between the moving mechanical parts of bearings, gears, bushings and kinematisms in general, and therefore the mechanical wear of pumps, valves, etc. It is "Zinc free", i.e. free of Ashes ("Ashless"). Its use does not produce harmful effects on metals and standard elastomers already compatible with mineral oil. It does not require special precautions for its handling, as it is not classified as hazardous to health and does not have exposure limits (TLV: Threshold limit value). Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with mineral-based hydraulic oils. It possesses a very high viscosity index, which permits its use within vast ambient thermal intervals of operation, remaining constant over time. Presents: -A very low natural sliding point; -Exceptional protection against wear, corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

Hydrosint 46 is a synthetic organic ester of high quality (CEE designation: THI, Forms D), anhydrous, characterised by excellent flame resistance with self-extinguishing properties, which reduces the possibility of fire triggering by Hot or melted metals, overheating of mechanical parts, sparks, etc. It has a high resistance to oxidation and thermal-oxidative decay. It is equipped with lubricating properties comparable to an excellent oil-free, zinc-resistant mineral water. It possesses a very high index of natural viscosity which permits its use within extensive operating thermal systems. Its low density facilitates the purification in centrifuge and extraction from the systems of treatment of waste water. It's biodegradable. Its use does not produce damaging effects on metals and elastomers that are already compatible with mineral oils. It has strong anti-wear, Antifoam, anticorrosive, Antirust, Demulsive and "Air release" properties. It does not require handling precautions higher than those normally adopted for mineral oils. Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with THI fluids of other nature.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

Hydrosint 68 is a synthetic organic ester of high quality (CEE designation: THI, Forms D), anhydrous, characterised by excellent flame resistance with self-extinguishing properties, which reduces the possibility of fire triggering by Hot or melted metals, overheating of mechanical parts, sparks, etc. It has a high resistance to oxidation and thermal-oxidative decay. It is equipped with lubricating properties comparable to an excellent oil-free, zinc-resistant mineral water. It possesses a very high index of natural viscosity which permits its use within extensive operating thermal systems. Its low density facilitates the purification in centrifuge and extraction from the systems of treatment of waste water. It's biodegradable. Its use does not produce damaging effects on metals and elastomers that are already compatible with mineral oils. It has strong anti-wear, Antifoam, anticorrosive, Antirust, Demulsive and "Air release" properties. It does not require handling precautions higher than those normally adopted for mineral oils. Vapours that develop in contact with surfaces at high temperatures are harmless, contrary to what happens with THI fluids of other nature.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is an ashless, zinc-free, fully synthetic, biodegradable, high viscosity index lubricant, for hydraulic systems and for the lubrication of guides with hydrostatic systems. It is formulated with particular saturated synthetic esters and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It guarantees: - a high Viscosity Index with high mechanical strength typical of the synthetic base used, without the addition of improving additives, for a constant performance for long periods even in severe operating conditions; - high thermal-oxidative resistance thanks to the use of specific and exclusive additives; - a very low natural pour point; - a strong and marked chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-mixability in all percentages with mineral origin lubricants; - compatibility with all metals and their alloys used in normal machinery **. **Note: Around 90 ° C there can be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; however, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is an ashless lubricant, zinc-free, totally synthetic, biodegradable, with a high viscosity index, for hydraulic systems and for the lubrication of guides with hydrostatic systems. It is formulated with special saturated synthetic esters and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It guarantees: -an elevated viscosity index of high mechanical strength of the synthetic base used, without addition of additives, for a consistent performance for long periods even in harsh conditions of operation; -High thermal-oxidative resistance thanks to the use of specific and exclusive additives; -A very low natural sliding point; -strong chemical stability even at high temperatures; -Exceptional protection against wear, corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin; -Compatibility with all metals and their alloys used in normal machinery * *. Note: Around 90 ° C it is possible to have a moderate attack of the copper and its alloys, like the bronze, with relative blackening of the surfaces; However, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally small extent compared to mineral oil. It is compatible with the best quality elastomers commonly found on the market such as: -fluorurated rubber (e.g. Viton); -PTFE (e.g. Teflon); -Butadiene Rubber acrylamnitrile (High nitrile): NBR-HNBR; -Fluorosiliconic rubber; -Silicone rubber or other rubbers, however, compatible with saturated synthetic esters.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a fully synthetic, biodegradable lubricant, extremely fluid, with a high viscosity index, for circulation systems. It is formulated with particular saturated synthetic esters and with a careful package of ashless additives against wear, oxidation, rust and foam. Features: - a high viscosity index with high mechanical resistance, typical of the synthetic base used in the product, without improving additives, for consistent performance over long periods even under harsh operating conditions; - a very low natural pour point; - a strong and distinct chemical stability even at high temperatures; - an exceptional protection against wear, corrosion, rust and foam; - compatibility-mixability in all percentages with mineral oils; - compatibility with all metals and their alloys used in conventional machines**. **Note: At around 90°C you can have a moderate effect on Copper and its alloys, such as Brass, with relative blackening of the surfaces; however, it is established that that Copper and its alloys act as powerful catalysts in the oxidative process and thermal decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a totally synthetic, biodegradable, very fluid lubricant, with a high viscosity index, for hydraulic systems. It is formulated with special saturated synthetic esters and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It guarantees: -a high viscosity index of high mechanical strength of the synthetic base used, without addition of additives, for a consistent performance for long periods even in harsh conditions of operation; -A very low natural sliding point; -strong chemical stability even at high temperatures; -Exceptional protection against wear, corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin; -Compatibility with all metals and their alloys used in normal Machinery * *. * * Note: Around 90 ° C it is possible to have a moderate attack of the copper and its alloys, like the bronze, with relative blackening of the surfaces; However, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally small extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a fully synthetic, biodegradable lubricant with a high Viscosity Index, for hydraulic systems. It is formulated with particular saturated synthetic esters and with an accurate package of additives without ashes against wear, oxidation, rust and foam. It guarantees: - a high viscosity index with high mechanical strength of the synthetic base used, without the addition of improver additives, for a constant performance for long periods even in heavy operating conditions; - a very low natural pour point; - a strong and strong chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-mixability in all percentages with lubricants of mineral origin; - compatibility with all metals and their alloys used in normal machines **. **Note: Around 90 ° C there can be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; however, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

This is a fully synthetic, biodegradable chain lubricant with a high Viscosity Index for hydraulic systems and guideway lubrication of hydrostatic systems. It is formulated with special synthetic esters and saturated with an accurate package of ashless additives against wear, rust, oxidation and foam. It guarantees: - a high viscosity index with high mechanical resistance of a synthetic base used, without any enhancing additives, for consistent performance over long periods even under harsh operating conditions; - a very low natural pour point; - a strong and distinct chemical stability even at high temperatures; - an exceptional protection against wear, corrosion, rust, and foam; - compatibility-mixability in all percentages with mineral oils; - compatibility with all metals and their alloys used in conventional machines** - it is compatible with the highest quality elastomers commonly available on the market such as: - fluorinated rubber (Viton); - PTFE (for example Teflon); - Acrylonitrile butadiene rubber (high nitrile): NBR – HNBR; - fluorosilicone rubber; - silicone rubber, or other rubbers howsoever compatible with saturated synthetic esters. ** Note: At around 90° C it can have a moderate effect on copper and its alloys, such as brass, with the related surface blackening; however, it is established that copper and its alloys can act as powerful catalysts in the oxidative processes and thermal decay of oil in operation, but to an exceptionally small extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

This is a fully synthetic, biodegradable chain lubricant with a high Viscosity Index for hydraulic systems. It is formulated with special synthetic esters and saturated with an accurate package of ashless additives against wear, rust, oxidation and foam. It guarantees: - a high viscosity index with high mechanical resistance of a synthetic base used, without any enhancing additives, for consistent performance over long periods even under harsh operating conditions; - a very low natural pour point; - a strong and distinct chemical stability even at high temperatures; - an exceptional protection against wear, corrosion, rust, and foam; - compatibility-mixability in all percentages with mineral oils; - compatibility with all metals and their alloys used in conventional machines** - it is compatible with the highest quality elastomers commonly available on the market such as: - fluorinated rubber (Viton); - PTFE (for example Teflon); - Acrylonitrile butadiene rubber (high nitrile): NBR – HNBR; - fluorosilicone rubber; - silicone rubber, or other rubbers howsoever compatible with saturated synthetic esters. ** Note: At around 90° C it can have a moderate effect on copper and its alloys, such as brass, with the related surface blackening; however, it is established that copper and its alloys can act as powerful catalysts in the oxidative processes and thermal decay of oil in operation, but to an exceptionally small extent compared to mineral oil

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a totally synthetic, biodegradable, high viscosity index lubricant, for hydraulic systems and for the lubrication of guides with hydrostatic systems. It is formulated with particular saturated synthetic esters and with an accurate package of ash-free additives against wear, oxidation, rust and foam. It is a flame resistant, "self-extinguishing" oil, formulated to reduce the potential risk of fire. It ensures: - a high viscosity index with high mechanical strength typical of the synthetic base used, without the addition of improving additives, for a constant performance for long periods even in harsh operating conditions; - a very low natural pour point; - a strong and marked chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-mixability in all percentages with mineral origin lubricants; - compatibility with all metals and their alloys used in normal machinery **. **Note: Around 90 ° C there can be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; however, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a fully synthetic, biodegradable, high viscosity index lubricant for hydraulic systems and for the lubrication of guides with hydrostatic systems. It is formulated with special saturated synthetic esters and with a careful package of ashless additives against wear, oxidation, rust and foam. It is a flame resistant, "self extinguishing" oil formulated to reduce the potential risk of fire. It ensures: - a high viscosity index with high mechanical resistance typical of the synthetic base used, without the addition of improving additives, for a constant performance for long periods even in severe operating conditions; - a very low natural pour point; - a strong and marked chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-mixability in all percentages with lubricants of mineral origin; - compatibility with all metals and their alloys used in normal machinery **. It is compatible with the best quality elastomers commonly found on the market such as: - fluorinated rubber (for example Viton); - PTFE (for example Teflon); - acrylonitrile butadiene rubber (high nitrile): NBR-HNBR; - fluorosilicone rubber; - silicon rubber, or other rubbers however compatible with saturated synthetic esters. **Note: Around 90 ° C there may be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; it is however established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based hydraulic oil

It is a totally synthetic, biodegradable, high viscosity index lubricant for hydraulic systems. It is formulated with special saturated synthetic esters and with a careful package of ashless additives against wear, oxidation, rust and foam. It ensures: - a high viscosity index with high mechanical resistance typical of the synthetic base used, without the addition of improver additives, for a constant performance for long periods even in severe operating conditions; - a very low natural pour point; - a strong and marked chemical stability even at high temperatures; - exceptional protection against wear, corrosion, rust, foam; - compatibility-miscibility in all percentages with lubricants of mineral origin; - compatibility with all metals and their alloys used in normal machinery ** **Note: Around 90 ° C there may be a moderate attack of copper and its alloys, such as bronze, with relative blackening of the surfaces; however, it is established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally reduced extent compared to mineral oil.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a ready-to-use multifunctional fluid, consisting of an evaporable fluid mineral base mixed with polisiloxane-based silicone oils, which, by exerting a synergetic action among themselves, result in a product with release, anti-adhesive, protective, detergent and lubricating characteristics. The product is clear, colourless and of a very moderate odour. K6083, when applied to the surfaces of different materials, first of all removes any sludge and residues that may be present and, after the fairly rapid evaporation of the solvent component, leaves a very thin, water-repellent, protective, lubricating oily film with a remarkable non-stick, anti-adhesive and slipping power. The product is free of volatile organic compounds (VOC).

Family: Neat coolant for textile industry
Type: Mineral based neat coolant for the lubrication of knitting machines.

It is an "ashless" (without ashes), colourless white lubricating oil with a very high degree of purity, obtained from white oil for pharmaceutical and food use, free of aromatic hydrocarbons and sulphur compounds. It is especially formulated for the lubrication of very low tolerance - mechanisms, specific for the textile industry. It features: - Excellent anti-wear power, for the protection of kinematics and movement organs. - White colour, to avoid staining of the worked material, and washability, to facilitate an easy removal. - High thermal-oxidative resistance, to prevent the formation of sludge, varnishes and residues. - Protection against corrosion induced by the presence of humidity. - High lifting power, which ensures the presence of a protective lubricating film on metal surfaces. - It presents a very low tendency to the formation of fumes and mists and a high hygienic-sanitary compatibility, which make it well tolerated by the operators.

Family: Neat coolant for textile industry
Type: Mineral based neat coolant for the lubrication of knitting machines.

It is an "ashless" (without ashes), colourless white lubricating oil with a very high degree of purity, obtained from white oil for pharmaceutical and food use, free of aromatic hydrocarbons and sulphur compounds. It is especially formulated for the lubrication of very low tolerance - mechanisms, specific for the textile industry. It features: - Excellent anti-wear power, for the protection of kinematics and movement organs. - White colour, to avoid staining of the worked material, and washability, to facilitate an easy removal. - High thermal-oxidative resistance, to prevent the formation of sludge, varnishes and residues. - Protection against corrosion induced by the presence of humidity. - High lifting power, which ensures the presence of a protective lubricating film on metal surfaces. - It presents a very low tendency to the formation of fumes and mists and a high hygienic-sanitary compatibility, which make it well tolerated by the operators.

Family: Neat coolant for textile industry
Type: Mineral based neat coolant for the lubrication of knitting machines.

It is an "ashless" (without ashes), colourless white lubricating oil with a very high degree of purity, obtained from white oil for pharmaceutical and food use, free of aromatic hydrocarbons and sulphur compounds. It is especially formulated for the lubrication of very low tolerance - mechanisms, specific for the textile industry. It features: - Excellent anti-wear power, for the protection of kinematics and movement organs. - White colour, to avoid staining of the worked material, and washability, to facilitate an easy removal. - High thermal-oxidative resistance, to prevent the formation of sludge, varnishes and residues. - Protection against corrosion induced by the presence of humidity. - High lifting power, which ensures the presence of a protective lubricating film on metal surfaces. - It presents a very low tendency to the formation of fumes and mists and a high hygienic-sanitary compatibility, which make it well tolerated by the operators.

Family: Neat coolant for textile industry
Type: Mineral based neat coolant for the lubrication of knitting machines.

It is an "ashless" (without ashes), colourless white lubricating oil with a very high degree of purity, obtained from white oil for pharmaceutical and food use, free of aromatic hydrocarbons and sulphur compounds. It is especially formulated for the lubrication of very low tolerance - mechanisms, specific for the textile industry. It features: - Excellent anti-wear power, for the protection of kinematics and movement organs. - White colour, to avoid staining of the worked material, and washability, to facilitate an easy removal. - High thermal-oxidative resistance, to prevent the formation of sludge, varnishes and residues. - Protection against corrosion induced by the presence of humidity. - High lifting power, which ensures the presence of a protective lubricating film on metal surfaces. - It presents a very low tendency to the formation of fumes and mists and a high hygienic-sanitary compatibility, which make it well tolerated by the operators

Family: Industrial lubricants
Type: Textile Lubricant

It is an "ashless" (without ashes), white colorless lubricating oil with a very high degree of purity, obtained from white oil for pharmaceutical and food use, free of aromatic hydrocarbons and sulfur compounds. It is particularly formulated for the lubrication of very low tolerance- mechanisms, specific for the textile industry. It features: - Excellent anti-wear power, for the protection of kinematics and movement organs. - White color, to avoid staining of the worked material. - High thermal-oxidative resistance, to prevent the formation of sludge, varnishes and residues. - Protection against corrosion induced by the presence of humidity. -High lifting power, which ensures the presence of a protective lubricating film on metal surfaces. It is free from dangerous compounds; it has a very low tendency to the formation of fumes and mists and a high hygienic-sanitary compatibility, which makes it well tolerated by the operators.

Family: Neat coolant for textile industry
Type: Mineral based neat coolant for the lubrication of knitting machines.

It is an "ashless" (without ashes), colourless white lubricating oil with a very high degree of purity, obtained from white oil for pharmaceutical and food use, free of aromatic hydrocarbons and sulphur compounds. It is especially formulated for the lubrication of very low tolerance - mechanisms, specific for the textile industry. It features: - Excellent anti-wear power, for the protection of kinematics and movement organs. - White colour, to avoid staining of the worked material, and washability, to facilitate an easy removal. - High thermal-oxidative resistance, to prevent the formation of sludge, varnishes and residues. - Protection against corrosion induced by the presence of humidity. - High lifting power, which ensures the presence of a protective lubricating film on metal surfaces. - It presents a very low tendency to the formation of fumes and mists and a high hygienic-sanitary compatibility, which make it well tolerated by the operators.

Family: Neat coolant for textile industry
Type: Mineral based neat coolant for the lubrication of knitting machines.

It is an "ashless" (without ashes), colourless white lubricating oil with a very high degree of purity, obtained from white oil for pharmaceutical and food use, free of aromatic hydrocarbons and sulphur compounds. It is especially formulated for the lubrication of very low tolerance - mechanisms, specific for the textile industry. It features: - Excellent anti-wear power, for the protection of kinematics and movement organs. - White colour, to avoid staining of the worked material, and washability, to facilitate an easy removal. - High thermal-oxidative resistance, to prevent the formation of sludge, varnishes and residues. - Protection against corrosion induced by the presence of humidity. - High lifting power, which ensures the presence of a protective lubricating film on metal surfaces. - It presents a very low tendency to the formation of fumes and mists and a high hygienic-sanitary compatibility, which make it well tolerated by the operators.

Family: Industrial lubricants
Type: Textile Lubricant

It is a white colorless lubricating oil with a very high degree of purity, free from aromatic hydrocarbons and obtained from white oil for pharmaceutical and food use. It is specifically formulated for the lubrication of textile industry machines. It features: - an excellent anti-wear power. - White color, to avoid staining of the worked material. -High resistance to thermal-oxidative decay to prevent the formation of sludge, varnishes and residues. - Protection against corrosion induced by the presence of humidity. It is free from dangerous compounds; it has a very low tendency to the formation of fumes and mists and a high hygienic-sanitary compatibility, which makes it well tolerated by the operators.

Family: Industrial lubricants
Type: Textile Lubricant

It is a white colorless lubricating oil with a very high degree of purity, free from aromatic hydrocarbons and obtained from white oil for pharmaceutical and food use. It is specifically formulated for the lubrication of textile industry machines. It features: - an excellent anti-wear power. - White color, to avoid staining of the worked material. -High resistance to thermal-oxidative decay to prevent the formation of sludge, varnishes and residues. - Protection against corrosion induced by the presence of humidity. It is free from dangerous compounds; it has a very low tendency to the formation of fumes and mists and a high hygienic-sanitary compatibility, which makes it well tolerated by the operators.

Prodotto ECO
Family: Neat coolant for textile industry
Type: Bio based neat coolant for the lubrication of knitting machines.

It is a whole, fluid coolant, free from mineral oil, formulated for the lubrication of very low tolerance mechanisms in the textile industry. It is formulated with the latest generation raw materials, consisting of totally saturated synthetic esters, biodegradable, with additives designed to optimize anti-wear, antioxidant and washability performance. It is characterized by: - Excellent anti-wear power, for the protection of kinematics and moving parts. - Soft color, to avoid staining of the processed material. - Excellent washability, to facilitate easy removal if necessary. - High thermal-oxidative resistance, to prevent the formation of sludge, lacquers and residues. - Protection from corrosion induced by the presence of humidity. - Good greasing power, which ensures the presence of a protective lubricating film on the metal surfaces. - High compatibility with mechatronic mechanisms, in particular with piezoelectric levers. - Excellent compatibility with all types of commercial gaskets. - High flame point, with consequent reduction of the formation of fumes and mists. - High hygienic-sanitary compatibility, which make it well tolerated by operators. - Total absence of dangerous compounds.

Prodotto ECO
Family: Neat coolant for textile industry
Type: Bio based neat coolant for the lubrication of knitting machines.

It is a whole, fluid coolant, free from mineral oil, formulated for the lubrication of very low tolerance mechanisms in the textile industry. It is formulated with the latest generation raw materials, consisting of totally saturated synthetic esters, biodegradable, with additives designed to optimize anti-wear, antioxidant and washability performance. It is characterized by: - Excellent anti-wear power, for the protection of kinematics and moving parts. - Soft color, to avoid staining of the processed material. - Excellent washability, to facilitate easy removal if necessary. - High thermal-oxidative resistance, to prevent the formation of sludge, lacquers and residues. - Protection from corrosion induced by the presence of humidity. - Good greasing power, which ensures the presence of a protective lubricating film on the metal surfaces. - High compatibility with mechatronic mechanisms, in particular with piezoelectric levers. - Excellent compatibility with all types of commercial gaskets. - High flame point, with consequent reduction of the formation of fumes and mists. - High hygienic-sanitary compatibility, which make it well tolerated by operators. - Total absence of dangerous compounds.

Prodotto ECO
Family: Neat coolant for textile industry
Type: Textile Lubricant

It is a whole, fluid coolant, free from mineral oil, formulated for the lubrication of very low tolerance mechanisms in the textile industry. It is formulated with the latest generation raw materials, consisting of totally saturated synthetic esters, biodegradable, with additives designed to optimize anti-wear, antioxidant and washability performance. It is characterized by: - Excellent anti-wear power, for the protection of kinematics and moving parts. - Soft color, to avoid staining of the processed material. - Excellent washability, to facilitate easy removal if necessary. - High thermal-oxidative resistance, to prevent the formation of sludge, lacquers and residues. - Protection from corrosion induced by the presence of humidity. - Good greasing power, which ensures the presence of a protective lubricating film on the metal surfaces. - High compatibility with mechatronic mechanisms, in particular with piezoelectric levers. - Excellent compatibility with all types of commercial gaskets. - High flame point, with consequent reduction of the formation of fumes and mists. - High hygienic-sanitary compatibility, which make it well tolerated by operators. - Total absence of dangerous compounds.

Prodotto ECO
Family: Neat coolant for textile industry
Type: Bio based neat coolant for the lubrication of knitting machines.

It is a whole, fluid coolant, free from mineral oil, formulated for the lubrication of very low tolerance mechanisms in the textile industry. It is formulated with the latest generation raw materials, consisting of totally saturated synthetic esters, biodegradable, with additives designed to optimize anti-wear, antioxidant and washability performance. It is characterized by: - Excellent anti-wear power, for the protection of kinematics and moving parts. - Soft color, to avoid staining of the processed material. - Excellent washability, to facilitate easy removal if necessary. - High thermal-oxidative resistance, to prevent the formation of sludge, lacquers and residues. - Protection from corrosion induced by the presence of humidity. - Good greasing power, which ensures the presence of a protective lubricating film on the metal surfaces. - High compatibility with mechatronic mechanisms, in particular with piezoelectric levers. - Excellent compatibility with all types of commercial gaskets. - High flame point, with consequent reduction of the formation of fumes and mists. - High hygienic-sanitary compatibility, which make it well tolerated by operators. - Total absence of dangerous compounds.

Family: Neat coolant for textile industry
Type: Bio based neat coolant for the production of synthetic yarn.

It is a neat cooling lubricant, developed for the spinning of synthetic polymers. It is formulated from synthetic esters of vegetable origin that guarantee excellent antistatic and anti-wear power on PA, PP, PET and PES fibres. It guarantees: - a very high degree of tolerability for operators thanks to the absence of mineral oil and carcinogenic compounds; - very effective anti-rust protection; - excellent lubricating and wetting power that guarantees a reduction in yarn-to-metal, yarn-to-ceramic and yarn-to-yarn friction; - excellent compatibility with all polymers used for synthetic fibres; - high antistatic property; - APEO free.

Family: Industrial Fluids
Type: Solvent-based industrial degreasing

It is a detergent solvent for the textile industry, consisting of a mixture of isoparaffins, with additives that give it lubricating properties. It is clear, very moderate smell, well tolerated by the operators. It has an excellent degreasing power combined with a good evaporation rate. It is very smooth and penetrating, particularly suitable for the cleaning of the needles and plates guides of the circular knitting machines. It is free of chlorinated compounds.

Family: Automotive
Type: Synthetic-based engine oil

It’s a Super Tractor Oil Universal (STOU), totally based synthetic, formulated for use in the following main organs of the most common agricultural machinery in Europe: -engine; -gearbox and differential; -latest reductions; -hydraulic power transmission system; -brakes in an oil bath. Guarantees: -exceptional cleaning power to prevent in the engine the formation of residues, sludge and deposits in particular in the zone of the piston rings; -corrosion and wear protection of bearings and pumps; -protection against rust; -excellent protection of gear teeth, even in case of continuous and oscillating high loads; -a very high Viscosity Index, for effective power transmission of hydraulic circuits high temperatures; -a very low Point of Scrolling; -an excellent defoaming power.

Family: Industrial lubricants
Type: Synthetic based refrigeration compressors oil

Fully synthetic lubricant designed for refrigeration systems, heat pumps and air conditioning. It’s an alkyl benzene, obtained from benzene and propylene tetramer. Unlike mineral oils, NO FREEZE AB 68 is an aromatic hydrocarbon characterized by quality stability, much more than mineral oils. The miscibility of this product with HCFC refrigerants is excellent. Its very low flocking point and antifoam properties, as well as its exceptional stability at high temperatures, guarantee an outstanding lubrication, even under the most severe operating conditions. NO FREEZE AB 68 is also used in systems using ammonia as refrigerant. It guarantees: - excellent miscibility with HCFC refrigerants at low temperatures and a proper oil return to the compressor; - low flocking point; - strong lubricity power, even under the most severe operating conditions; - excellent compatibility with elastomers; - outstanding stability at high temperature; - good antifoam properties.

Family: Industrial lubricants
Type: Synthetic based refrigeration compressors oil

Fully synthetic lubricant designed for refrigeration systems, heat pumps and air conditioning. It’s an alkyl benzene, obtained from benzene and propylene tetramer. Unlike mineral oils, NO FREEZE AB 100 is an aromatic hydrocarbon characterized by quality stability, much more than mineral oils. The miscibility of this product with HCFC refrigerants is excellent. Its very low flocking point and antifoam properties, as well as its exceptional stability at high temperatures, guarantee an outstanding lubrication, even under the most severe operating conditions. NO FREEZE AB 100 is also used in systems using ammonia as refrigerant. It guarantees: - excellent miscibility with HCFC refrigerants at low temperatures and a proper oil return to the compressor; - low flocking point; - strong lubricity power, even under the most severe operating conditions; - excellent compatibility with elastomers; - outstanding stability at high temperature; - good antifoam properties.

Family: Industrial lubricants
Type: Mineral based refrigeration compressors oil

Special oil, obtained from especially-selected naphthenic mineral bases, designed for the lubrication of refrigeration compressors and equipment operating at extremely low temperatures. Due to its chemical structure and its features, it allows to minimize drawbacks deriving from the possible mixing with refrigerant fluids during the process. It’s a non-freezing oil characterized by very low pour point and flocking point and a good behaviour at high temperatures. It provides: - outstanding demulsibility; - high resistance to oxidation, which prevents from the formation of residuals and deposits on hot surfaces and, in particular, compressor valves; - absence of paraffins; - low volatility; - good chemical stability.

Family: Industrial lubricants
Type: Mineral based refrigeration compressors oil

Special oil, obtained from especially-selected naphthenic mineral bases, designed for the lubrication of refrigeration compressors and equipment operating at extremely low temperatures. Due to its chemical structure and its features, it allows to minimize drawbacks deriving from the possible mixing with refrigerant fluids during the process. It’s a non-freezing oil characterized by very low pour point and flocking point and a good behaviour at high temperatures. It provides: - outstanding demulsibility; - high resistance to oxidation, which prevents from the formation of residuals and deposits on hot surfaces and, in particular, compressor valves. - absence of paraffins; - low volatility; - good chemical stability.

Family: Industrial lubricants
Type: Mineral based refrigeration compressors oil

Special oil, obtained from especially-selected naphthenic mineral bases, designed for the lubrication of refrigeration compressors and equipment operating at extremely low temperatures. Due to its chemical structure and its features, it allows to minimize drawbacks deriving from the possible mixing with refrigerant fluids during the process. It’s a non-freezing oil characterized by very low pour point and flocking point and a good behaviour at high temperatures. It provides: - outstanding demulsibility; - high resistance to oxidation, which prevents from the formation of residuals and deposits on hot surfaces and, in particular, compressor valves; - absence of paraffins; - low volatility; - good chemical stability.

Family: Rust preventives
Type: Corrosion preventive waxy base

It is an anti-rust protective, which leaves on the trated surface a thin, soft, flexible and adhesive film, even at extremely low temperatures. It is made of a mixture of highly-selected hydrocarbons oxidated by petrolates and overbased sulphonates modified with a dearomatized and denaturated hydrocarbon-solvent. It is characterized by a very moderate hydrocarbon odour and it can be easily removed with any hydrocarbon solvent.

Family: Industrial Fluids
Type: Solvent-based industrial degreasing

It is a multifunctional fluid, consisting of a mixture of isoparaffins, synthetic esters and polysiloxane-based silicone oil, which, by exerting a synergical action between them, give rise to a product that features both detergents and lubricants, protective and especially anti-adhesive and releasing agents. The product is clear, colourless, very moderate odor and well tolerated by the Operators. OLEOFORM V SIL 15, applied on surfaces of different materials, first removes sludge and residues that may be present and, after the discreetly rapid evaporation of the solvent part, leaves an oily veil very thin, shiny, water-repellent, protective, lubricant, which has no E.P. properties of load resistance, but a strong non-stick, anti-adhesive and gliding power. The product is totally inert to all metallic materials, but its compatibility with elastomers and plastics must be verified.

Family: Industrial Fluids
Type: Ceramic compounds lubricant

It is a specialty lubricant, consisting of an exclusive blend of highly selected and purified mineral oil, fatty acids, fatty acid esters and antioxidants, which form an oily liquid of low viscosity, clear, straw-coloured very clear and of very moderate odor.

Family: Industrial lubricants
Type: Synthetic lubricating oil

It is an ISO VG32 special lubricant, of low viscosity and mostly made from synthetic hydrocarbon bases mixed with anti-oxidant additives especially for the lubrication of tools used for glass vials and flasks manifacture on transfert systems. It features: -exceptional thermal and oxidative stability to extend the lubricant duration with the abscence of sludges, varnishes and paints -great demulsive properties for a quick separation from water, if present -excellent hydrolytic stability, to protect the circuit against corrosion with water presence -excellent filterability -great protection against rust -good anti-wear properties -extremely reduced carbon residues, foam and volatility; high flash point -compatibility with elastomers, normally used for seals -air-release properties -low viscosity to ensure the correct functioning of high-speed rotation kinematics -very clear colour, limpid.

Family: Industrial Fluids
Type: Formworks Releasing Agent

It is a special fluid with specific detaching properties, experimental, consisting of an exclusive mixture of hydrocarbons derived from synthesis processes, with a very high degree of purity and FDA compliance, in a mixture with fatty acids, fatty acid esters, synthetic esters and antioxidants, which form a liquid of very low viscosity, limpid, with a very light straw color and a very moderate odor.

Family: Industrial lubricants
Type: Colorless odorless white oil

It is a white pharmaceutical oil of mineral origin, coming from selected raw materials, highly refined and subjected to treatments able to impart the degree of purity required for all applications in which a product of this category is expressly required (cosmetics, pharmaceuticals, oenology, food, rubber and plastics industry, etc.). It is absolutely colourless, odorless, tasteless and satisfies the current norms of the Italian and European Pharmacopoeia.

Family: Industrial lubricants
Type: Colorless odorless white oil

It is a white pharmaceutical oil of mineral origin, coming from selected raw materials,Highly refined and subjected to treatments capable of imparting the degree of purity required for all applications in which a product of this category is expressly requested (cosmetics, pharmaceuticals, oenology, food, Rubber and plastics industries, etc.). It is absolutely colourless, odunscent, tasteless and satisfies the current norms of the Italian and European Pharmacopoeia.

Family: Industrial lubricants
Type: Technical white oil

It is a white, colourless Vaseline oil for technical uses. It is obtained from a lubricant base of Paraffinic origin previously selected and subjected to rigorous refining processes. It's colourless and Odor-unscented. Presents: -low Solvent power, compatible with the majority of elastomers; -dry residue pratically nil.

Family: Automotive
Type: Concentrated antifreeze

Antifreezing-cooling fluid perfectly soluble in water, free from nitrites, phosphates and amines. It consists of monoethylene glycol, mixed with appropriate antifoaming agents, anticorrosion products and oxidation inhibitors to ensure the following properties: - compatibility with hard water; - excellent protection of the cooling circuit against corrosion, especially of aluminium; - excellent compatibility with elastomers; - special inhibition for the anti-cavitation protection; - outstanding resistance to thermal-oxidative decay.

Family: Automotive
Type: Concentrated antifreeze

PACKFREEZE LONGLIFE is an antifreeze based on high purity ethylene glycol, free from silicates, boron, amines, nitrites and phosphates, expressly created for very long change intervals. It is one of the most modern antifreeze protective fluids available on the market. The special formulation, thanks to the use of a combination of organic inhibitors based on carboxylic acids, underlines the attention paid to respecting the environment, since it makes the product biodegradable. PACKFREEZE LONGLIFE ensures: - prolonged frequencies with very low maintenance interventions; - a very long term protection against the corrosion of metals (cast iron, aluminum, copper and welding alloys) and an excellent compatibility with all the non-metallic components present in the circuit (gaskets, ducts and rubber sleeves, elastomeric materials, plastic, paints, etc.); - no gelling phenomenon during use or storage; - better heat exchange efficiency; - superior long-term protection in particular of the heat exchange surfaces, against corrosion and the formation of deposits and scale and for a better operating efficiency of pumps, thermostats, ducts, gaskets, sleeves and radiators, compared to traditional antifreeze liquids ( nearly doubled durations); - absence of cavitation and foaming phenomena.

Prodotto ECO
Family: Industrial lubricants
Type: Biodegradable-based lubricating oil

It is a multifunctional neat cutting and lubricating oil, with a viscosity of about 32 cSt at 40 ° C, formulated to satisfy the need to reunite in a single product the typical properties of an oil for the disposable lubrication of guides and slides. of multi-spindle machine tools and a cutting oil. It is formulated with the latest generation raw materials, consisting of synthetic biodegradable esters, mixed with antioxidant, anti-rust additives and metal passivators. It has the following properties: - absence of fumes and vapors in processing; - good anti-wear power; - high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, whereby the oil is dispersed on the metal surface quickly and uniformly; - excellent greasing, EP and lubricating-release power for quality finishes; - excellent resistance to oxidation and rust and passivation of non-ferrous alloys; - low temperature of the machined pieces; - well crushed and chopped scrap; - excellent anti-welding power to cut it; - good biodegradability; - maximum tolerability by operators; The product is free from chlorinated and / or sulfur compounds and does not contain polycyclic aromatic hydrocarbons (PAHs).

Family: Neat cutting oils
Type: Neat cutting mineral oil

Two types of lubricants are so important to use with authomatic machines: - Cutting oils - Total loss lubricant oil It’s normal that a certain quantity of lubricant go into the cutting oil tank. The normal parameters considering machinery instructions are: 10 – 30 lt for 8 hours per day. For that reason, the lubricant will be more fluid, losing its initial anti-welding natural properties and requiring expensive specific additives or its substitution. PLURILUB V 22 with a viscosity of 22 cSt at 40°C, is specific for unifying, in the same product, EP and cutting fluid properties with excellent standard lubricant properties (slide-way and hydraulic). This product guarantees: - Excellent EP power for cutting operations, thanks to ‘inactive’ EP additives that don’t affect copper and its alloys. - It satisfy the majority of working process on automatic machineries. If it’s required a more fluid ‘active’ cutting oil or there are heavy operations, it’s advisable to dilute the product. PLURILUB V 22 peculiarities: - High anti welding power - Excellent anti corrosive properties - High resistance to oxidation and rust - High V.I. - Compatible with seals - Free from chlorine and its derivatives

Family: Neat cutting oils
Type: Neat cutting mineral oil

Two types of lubricants are so important to use with authomatic machines: - Cutting oils - Total loss lubricant oil It’s normal that a certain quantity of lubricant go into the cutting oil tank. The normal parameters considering machinery instructions are: 10 – 30 lt for 8 hours per day. For that reason, the lubricant will be more fluid, losing its initial anti-welding natural properties and requiring expensive specific additives or its substitution. PLURILUB V 32 with a viscosity of 22 cSt at 40°C, is specific for unifying, in the same product, EP and cutting fluid properties with excellent standard lubricant properties (slide-way and hydraulic). This product guarantees: - Excellent EP power for cutting operations, thanks to ‘inactive’ EP additives that don’t affect copper and its alloys. - It satisfy the majority of working process on automatic machineries. If it’s required a more fluid ‘active’ cutting oil or there are heavy operations, it’s advisable to dilute the product. PLURILUB V 32 peculiarities: - High anti welding power - Excellent anti corrosive properties - High resistance to oxidation and rust - High V.I. - Compatible with seals - Free from chlorine and its derivatives.

Family: Neat cutting oils
Type: Neat cutting mineral oil

Automatic machine tools require the simultaneous use of two different lubricants for the following sectors: 1) cutting fluid; 2) total loss lubrication. It has been noticed that, while working, a certain amount of oil used for lubrication ends up in the cutting fluid; quantities of oil between 10 and 30 lt every day for 8 hours can be considered normal, according to the constructive criteria of the machine. This involves a progressive dilution of the cutting fluid that, while losing its natural anti-heat properties, requires the integration of expensive additives or even its total replacement. The product PLURILUB V 46, with a viscosity of about 46 cSt at 40 ° C, has been formulated to meet the need to reunite in a single product the typical properties of an EP oil for total loss lubrication (slide guides) and a cutting oil, thus overcoming all the aforementioned drawbacks. It has the following properties: - Excellent power E.P. during the cutting operations, conferred by special anti-overheating additives of the "inactive" type that do not affect the Copper and its alloys. Meets most of the needs of machining on automatic machines. If the presence of very "hard" materials or the particular gravity of certain processes require the use of an "active" or in any case specific cutting fluid, in this case there will be a certain dilution of the cutting oil by the PLURILUB V 46 used as a lubricating oil, but with effects much reduced over time or even irrelevant. - High anti-wear power. - Strong anti-corrosive properties. - High resistance to oxidation and rust. - High viscosity index. - Compatibility with gaskets. - Absence of Chlorine and Chlorine-derivatives.

Family: Rust preventives
Type: Oil base corrosion preventive

PRO CHAIN R is an anti-rust preservative, which leaves on the treated surfaces a thin, soft, flexible and adhesive film, even at low temperatures. It is made from a mixture of oxidated hydrocarbon from selected petrolatum and iper-basic sulphonated modified with a petroliferous, de-flavoured and denatured solvent. It has a very moderate hydrocarbon odour, easily removable with any petroliferous or chlorine solvent.

Family: Rust preventives
Type: Oil base corrosion preventive

It is an antirust fluid, non-dewatering, oil-based, with low odor and temporary. It contains corrosion inhibitors and is designed to protect work pieces made of steel foils. It provides an excellent protection against rust without causing the surfaces to darken or stain. It is recommended also for non-ferrous metals, such as aluminium. Duration of the protection: - in storage: between 6 and 12 months - in the open, but under a roof that keeps out rain and snow: between 1 and 6 months.

Family: Rust preventives
Type: Corrosion preventive waxy base

It is a long lasting rust preventive. It forms a waxy, semi-dry, amber-colored, flexible and adhesive film, even at very low temperatures. It is constituted by a mixture of oxidized hydrocarbons from selected petrolatums and hyperbasic sulphonates, modified with a dearomatized and denaturated oil-based solvent. It has a very light smell of hydrocarbons and can be easily removed with any hydrocarbon-based solvent.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a mineral hydraulic oil of the highest quality for bearings, gears and kinematics in general, in all those cases in which the operating conditions require a lubricant having an ISO VG 10 grade with anti-wear properties, which reduces to a minimum the mechanical wear of pumps, valves and mechanical parts in general in motion. It is made of: - mineral bases having a very narrow distillation cut, strictly solvent-refined and highly selected for both the starting crude and the refining process, which provides for a final hydrogen treatment; - additives with anti-wear, antioxidant, anti-rust, anti-foam and air-release properties of the highest quality. The modern lubrication circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow to obtain not only a very high operating performance, but also exceptional durability of the oil charge, unthinkable only up to a few years ago. The following properties are thus required for the oil, all ensured over time by PROMODYNE 10: - maximum level of anti-wear power over time, for operating durations of over 25,000 hours, as verified by analytical monitoring; - maximum degree of filterability of the oil (even at the lowest micrometries to avoid not only the clogging of the filters, but also the depletion of the additives); - exceptional resistance to oxidation, thermal decay, hydrolysis and aging, obtained through the qualitative selection of both the base, as indicated above, and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a mineral-based hydraulic oil, of the highest quality, for hydraulic controls, gears, bushings and kinematics in general, in all those cases where the harsh operating conditions require a lubricant with anti-wear properties, which reduces wear and tear to a minimum mechanical of pumps, valves and moving mechanical parts. The product ensures reliability and performance of the most modern hydraulic systems used in the most varied sectors: construction and earth moving, mines, fishing, navy, injection molding, etc. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve bonding, metal removal and filterability problems; it also meets the needs of the most demanding work cycles (for example in continuous production or in the continuous service of loan equipment for use) and resists oxidative decay at the highest operating temperatures. This oil has been developed to meet current and future demands of hydraulic systems and ensures: - marked protection of pumps and servo-valves with restricted tolerances even under very severe operating conditions, for both pressure and temperature levels; - excellent control of paints in tests of very long duration; - very high oxidation resistance in the TOST test; - excellent hydrolytic stability. The modern hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow to obtain not only a very high operating performance, but also exceptional durability of the oil charge, unthinkable only up to few years ago. The following properties are required for oil, all guaranteed over time by PROMODYNE 32: - maximum level of anti-wear power over time, for operating durations of more than 25,000 hours (as verified by analytical monitoring), balanced with friction modifiers that ensure sufficient static friction for wet clutches and parking brakes; - maximum degree of filterability of the oil (even at the lowest micrometries to avoid not only the clogging of the filters, but also the depletion of the additives); - exceptional resistance to oxidation, thermal decay, hydrolysis and aging, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts; - prolonged duration of oil charge and filters.

Family: Industrial lubricants
Type: Mineral hydraulic oil

High viscosity index oil for hydraulic controls, gears, bushings and kinematic mechanism in general, especially used when severe operating conditions demand a lubricant with anti-wear properties which minimizes the wear of pumps, valves and mechanical parts in motion. The product ensures the reliability and performance of modern hydraulic systems used in many different sectors: construction and earthmoving, mining, fishing, navy, injection molding, etc. In addition to meeting the most important global hydraulic performance specifications (4Q09), it reduces wear, the bonding of valves, the removal of metal and problems of filterability; furthermore, it meets the needs of the most demanding work cycles (for example in the non-stop production or in the non-stop service of equipment on loan) and resists to oxidative decay at the highest operating temperatures. This oil has been developed to meet the current and future demands for hydraulic oils and provides: - strong protection of pumps, even under very severe operating conditions; - excellent control of the paints in very long endurance tests; - very high resistance to oxidation in the TOST test; - excellent hydrolytic stability. The modern hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow to obtain not only a very high operating performance, but also exceptional durability of the oil charge, unthinkable only up to few years ago. The following properties are required for oil, all guaranteed over time by PROMODYNE 46: - maximum level of anti-wear power over time, for operating durations of more than 25,000 hours (as verified by analytical monitoring), balanced with friction modifiers that ensure sufficient static friction for wet clutches and parking brakes; - maximum degree of filterability of the oil (even at the lowest micrometries to avoid not only the clogging of the filters, but also the depletion of the additives); - exceptional resistance to oxidation, thermal decay, hydrolysis and aging, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts; - prolonged duration of oil charge and filters.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a mineral-based hydraulic oil, of the highest quality, for hydraulic controls, gears, bushings and kinematics in general, in all those cases where the harsh operating conditions require a lubricant with anti-wear properties, which reduces wear and tear to a minimum mechanical of pumps, valves and moving mechanical parts. The product ensures reliability and performance of the most modern hydraulic systems used in the most varied sectors: construction and earth moving, mines, fishing, navy, injection molding, etc. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve bonding, metal removal and filterability problems; it also meets the needs of the most demanding work cycles (for example in continuous production or in the continuous service of loan equipment for use) and resists oxidative decay at the highest operating temperatures. This oil has been developed to meet current and future demands of hydraulic systems and ensures: - marked protection of pumps and servo-valves with restricted tolerances even under very severe operating conditions, for both pressure and temperature levels; - excellent control of paints in tests of very long duration; - very high oxidation resistance in the TOST test; - excellent hydrolytic stability. The modern hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow to obtain not only a very high operating performance, but also exceptional durability of the oil charge, unthinkable only up to few years ago. The following properties are required for oil, all guaranteed over time by PROMODYNE 68: - maximum level of anti-wear power over time, for operating durations of more than 25,000 hours (as verified by analytical monitoring), balanced with friction modifiers that ensure sufficient static friction for wet clutches and parking brakes; - maximum degree of filterability of the oil (even at the lowest micrometries to avoid not only the clogging of the filters, but also the depletion of the additives); - exceptional resistance to oxidation, thermal decay, hydrolysis and aging, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts; - prolonged duration of oil charge and filters.

Family: Industrial lubricants
Type: Spindle Oil

It is a high-performance lubricant, of the “ashless” type characterized by extremely low viscosity and mainly designed for the lubrication of high-speed machine tools spindles. It is composed of: - Higly selected and refined normal and iso-paraffin-based hydrocarbon fluid with an extremely high purity degree - Anti-wear, anti-oxidant, anti-rust, anti-foam and air-release “ashless” additives of the highest quality and free from zinc. It features: - Maximum level of anti-wear power over time, “ashless” and formulated for very prolonged operations - Exceptional resistance to oxidation, thermal decay, hydrolysis and aging of the oil, obtained through qualitative selection of both the hydrocarbon base and the additives used, to minimize any residues formation - Great anti-foam, air-release and water demulsibility power - Excellent anti-rust and anti-corrosive power on the mechanical parts in order to improve the machine tools lifetime and provide better long-term precision.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a highly performance product, of the "ashless" type, with an extremely low viscosity, mainly indicated for the lubrication of the high speed spindles of machine tools. It is made up: - a highly refined and selected hydrocarbon fluid based on normal-paraffins and iso-paraffins with a very high degree of purity; - additives with anti-wear, antioxidant, anti-rust, anti-foam and "air release" properties of the highest quality level, zinc-free, "ashless" type. Features: - maximum level of the anti-wear power over time, of the ashless type, for extremely long operating durations; - exceptional resistance to oxidation, thermal decay, hydrolysis and aging of the oil, obtained through the qualitative selection of both the hydrocarbon base and the additives used, to help minimize the formation of deposits; - excellent anti-foam power, air release and water demulsibility; - excellent anti-rust and anti-corrosive power of mechanical parts, to improve the durability of machinery and provide greater long-term precision.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, in all those cases where the harsh operating conditions require a lubricant having an ISO VG 10 grade with anti-wear properties, which minimizes the mechanical wear of pumps, valves and mechanical parts in general in motion. It is made of: - mineral bases having a very narrow distillation cut, strictly solvent-refined and highly selected for both the starting crude and the refining process, which provides for a final hydrogen treatment; - additives with anti-wear, antioxidant, anti-rust, anti-foam and high-quality "air-release", "ashless" free zinc. Modern power transmission hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow not only to obtain a very high operating performance, but also exceptional durability of the oil charge, unthinkable only until a few years ago. The oil requires the following properties, all guaranteed over time by PROMODYNE ZF 10: - maximum level of anti-wear “ashless”(ash-free) power, for durations over 25,000 hours, as verified by analytical monitoring; - maximum degree of filterability of the oil (even at the lowest micrometries) to avoid not only the clogging of the filters, but also the depletion of the additives; - exceptional resistance to oxidation, thermal decay, hydrolysis and aging of the oil, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, in all those cases where the harsh operating conditions require a lubricant having ISO VG 68 grade with anti-wear properties, which reduces mechanical pump wear to a minimum, valves and mechanical parts in general in motion. It is made of: - Mineral bases having a very narrow distillation cut, severely refined to the solvent and highly selected for both the starting crude and the refining process, which provides for a final hydrogen treatment; - Additives with anti-wear, antioxidant, anti-rust, anti-foam and high-quality "air-release", "ashless" type Zinc-free. Modern power transmission hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow not only a very high operating performance, but also exceptional durability of the oil charge, which are unthinkable only until a few years ago. PROMODYNE ZF 68 has the following characteristics, granted in time: - Maximum anti-wear power level, in order to last more than 25.000 hours, as supervised; - Maximum oil filterability capacity, even at the lowest micrometer, in order to avoid filter stoppage and additive depletion; - Excellent resistance to oxidation, thermic deterioration, hydrolysis and oil ageing, obtained from the quality selection of the base, as up indicated, and from the used additives; - Excellent anti-foam, “air release” and water demulsivity power; - Excellent anti-rust and anti-corrosive power of the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, with a high Viscosity Index, in all those cases where the harsh operating conditions require a lubricant having an ISO VG 46 grade with anti-wear properties, which reduces to a minimum the mechanical wear of pumps, valves and mechanical parts in general in movement. It is made of: - Mineral bases having a very narrow distillation cut, severely refined to the solvent and highly selected for both the starting crude and the refining process, which provides for a final hydrogen treatment; - Additives with anti-wear, antioxidant, anti-rust, anti-foam and high-quality "air-release", "ashless" type Zinc-free. Modern power transmission hydraulic circuits, in fact, equipped with extremely efficient filtration systems (down to less than 1 micron), allow not only a very high operating performance, but also exceptional durability of the oil charge, which are unthinkable only until a few years ago. PROMODYNE ZF SHV 46 has the following characteristics, granted in time: - Maximum anti-wear power level, in order to last more than 25.000 hours, as supervised; - Maximum oil filterability capacity, even at the lowest micrometer, in order to avoid filter stoppage and additive depletion; - Excellent resistance to oxidation, thermic deterioration, hydrolysis and oil ageing, obtained from the quality selection of the base, as up indicated, and from the used additives; - Excellent anti-foam, “air release” and water demulsivity power; - Excellent anti-rust and anti-corrosive power of the mechanical parts; - High Viscosity Index in order to: - reduce viscosity loss with high temperature and guarantee, in this way, the power transmission system efficiency; - improve the viscoelastic reaction to the intermittent load stresses.

Family: Rust preventives
Type: Vanishing base corrosion preventive

Protective dewatering fluid that after evaporation of the solvent leaves a very slightly oily thin veil. It is clear, amber, odorless. It is obtained from a particularly refined hydrocarbon distillate, with a combination of inhibitors of strongly active corrosion based on amides of carboxylic acids, oxidized petrolatum e metal deactivators, which perform a synergistic action between them. Removal does not result normally necessary, but it can still be easily done with any one petroleum or chlorinated solvent or with alkaline detergents.

Family: Rust preventives
Type: Vanishing base corrosion preventive

It is a dewatering protective fluid which, after evaporating the solvent, leaves a very lightly oily thin veil on the surfaces. It is clear, amber, odorless. It is obtained from a particularly refined hydrocarbon distillate, with a combination of highly active corrosion inhibitors based on amides of carboxylic acids, oxidized petrolatum and metal deactivators, which exert a synergistic action between them. The removal is not normally necessary, but can still be easily carried out with any petroleum solvent or alkaline detergents.

Family: Rust preventives
Type: Oil base corrosion preventive

It is higly-refined and solvent-treated hydrocarbon paraffin-based and fluid anti-rust preventive mixed with metal passivator additives, which guarantees: -great dewatering properties: it is capable of removing water from the metal surfaces -high wetting power in order to favour its adhesion to the metal surfaces, evenly covering them, protecting them from humidity and rejecting condensation water - high degree of fluidity and penetrability for interstitial parts protection - strong protective and anti-oxidant properties for a perfect conservation of the metal surfaces. It leaves on the pieces a thin oily film

Family: Rust preventives
Type: Oil base corrosion preventive

It is a classic mineral oil-based temporary antirust protective, containing corrosion inhibitors and devoid of "dewatering" properties. Suitable for the protection of complex components in steel laminates, it assures a good anti-rust power without causing any darkening or staining and it is also recommended for non-ferrous metals, such as for example the aluminum alloys. Leave on the treated surfaces an oily, adhesive veil for prolonged protection over time.

Family: Rust preventives
Type: Oil base corrosion preventive

It is a classic temporary anti-rust protection mineral-based oil, containing corrosion inhibitors; it does not have "dewatering" properties. It is suitable for the protection of complex components in steel sheets, it ensures good anti-rust power without causing stains and is also recommended for non-ferrous metals, such as aluminum alloys. It leaves an oily, adhesive veil on the treated surfaces for long-term protection.

Family: Rust preventives
Type: Oil base corrosion preventive

It is an anti-rust corrosion preventive oil based with hydrocarbon highly refined. It is severely treated with solvents and mixed with metal passivator additives. It is equipped with: - excellent “dewatering” properties; it is able to effectively move the possible presence of water from metallic surfaces. - high wetting power, perfecting the adhesion on metal surfaces, covering them evenly, protecting them from moisture and rejecting any condensation water. - a high degree of fluidity and penetrability to protect even interstitial parts. - strong protective and antioxidant properties, for a perfect preservation of metal surfaces, kept intact. Leave a thin, oily film on the pieces.

Family: Rust preventives
Type: Oil base corrosion preventive

Adhesive fluid, strongly water-repellent, that leaves on metal surfaces a thin, soft, light, not dry or sticky veil, that can be easily removed with any petroleum or chlorinated solvent or by alkaline washing or solvents Hydrocarbon free from Aromatic. Diluted in modified alcohol, perchloroethylene and hydrocarbon solvents, it remains stable in solution, without giving place to deposits or separations even after a long time. It is obtained from high-point flame-lubricating mineral oil in mixture with superrabasic and carboxylated calcium sulfonates. The product is therefore free from barium and emulgant Surfactants. The product is new, very moderate odor and leaves on the treated pieces a very effective protective veil and proved better than that of normal protective based on barium.

Family: Rust preventives
Type: Vanishing base corrosion preventive

PROTEX V 423 DW is a dewatering corrosion preventive that leaves a thin and oily film layer on treated surfaces after solvent evaporation. It’s obtained from a particularly refined hydrocarbon distillate, combined with a unique and highly effective corrosion inhibitors making a synergistic action among themselves. PROTEX V 423 DW has the following property: - excellent dewatering property -total absence of stains nor residue on treated surfaces; -excellent demulsifying property, even in the presence of alkaline compounds. fast and complete separation of water from metal surfaces; - It leaves a thin, adhesive, highly protective film on metal surfaces. - It maintains its properties unchanged over time. It’s not necessary to remove it, but you can easy do it with any petroleum solvent.

Family: Rust preventives
Type: Vanishing base corrosion preventive

It is a dewatering protective fluid, which leaves on the surfaces, after the evaporation, a very light and oily protective film. It appears light, amber and odourless. It is made from a particularly refined and distilled hydrocarbon base, with an exclusive and particularly efficient active combination of inhibitors of corrosion, which exert among each others a synergic action. It has the following properties: - it is very efficient in water removal; - it doesn’t leave spots and residues on the treated surfaces; - it doesn’t tend to emulsify, not even with the presence of alkaline compounds; - it quickly splits up from the water removed from the metal surface following both mechanical processes with emulsified water and alkaline washings; - it leaves on the metal surface an ultra-light and highly protective film; - it keeps unaltered its performance characteristics during the operations. The removal isn’t generally necessary, but it can be easily carried out with any hydrocarbon solvent or with alkaline detergents.

Family: Special products
Type: Vanishing base corrosion preventive

Dewatering preventative fluid, which leaves on the surfaces a very thin and slightly oily film, after evaporation. It is made from a particularly refined hydrocarbon distillate, mixed with an exclusive and effective combination of strongly active corrosion inhibitors. The product features the following properties: - Clear, amber and odorless - Very effective in water removal - It does not leave stains or residues on the treated surfaces - It is not likely to emulsify, not even in presence of alkaline compounds - It totally and very quickly separates from the water removed from the metal surfaces, following both mechanical processes with emulsified water and alkaline washings - It leaves a highly protective, ultra-thin and oily film on the metal surfaces - It retains its performative characteristics over time Removal is not usually required but it can be easily conducted with any kind of hydrocarbon solvent or with alkaline detergents, if needed.

Family: Rust preventives
Type: Vanishing base corrosion preventive

It is a dewatering protective fluid, which leaves on the surface, after the evaporation, a very light and oily protective film. It appears clear, amber and odourless. It is made from a particularly refined hydrocarbon distillate, with an exclusive, particularly efficient and strongly active inhibitors corrosion combination, which exert among them a synergic action. It appears the following properties: - It very efficient in water removal; - It doesn’t leave spots or resies on the treated surface; - It doesn’t tend to emulsify, not even with alkaline compoun; - It splits up very quickly and totally from the water removed from the metal surfaces following both mechanical processes with emulsified water and alkaline washings; - It leaves a light and highly protective film on the etal surfaces; -During the service, it keeps its performance characteristics unaltered. The removal is not normally necessary, but can still be easily carried out with any petroleum solvent or alkaline detergents.

Family: Rust preventives
Type: Vanishing base corrosion preventive

It is a preservative liquid, of moderate odour, which after the solvent evaporation, leaves an ultra-thin and waxy film on the treated surfaces. It appears clear and slightly amber. It is made from a particularly refined distilled hydrocarbon, with an exclusive and efficient combination of strongly active corrosion inhibitors, which exert among each others a synergic action. The product has been tested in both salt and humid-static chambers, with high performing results. It features: - Excellent anti-corrosive properties against rust. -Efficient in the removal of water from the treated surfaces, where it doesn’t leave spots or residues. - It leaves a very thin smooth film on the mal surfaces, which gives a high-quality protection. - It keeps its working properti unaltered over time. The removal is not necessary, but it can be easily done with an alkaline washing.

Family: Rust preventives
Type: Vanishing base corrosion preventive

It is a dewatering protective fluid, which leaves on the surface, after the evaporation, a very light, oily protective film. It appears clear, amber and odourless. It is made from a particularly refined hydrocarbon distillate, with an exclusive, particularly efficient and strongly active combination of inhibitors of corrosion, which exert among each others a synergic action. It features: - great efficiency in water removal; - it doesn’t leave spots or residual on the treated surfaces; - it doesn’t tend to emulsify, not even with alkaline compounds; - it splits up very quickly and totally from the water removed from the metal surfaces following both mechanical processes with emulsified water and alkaline washings; - it leaves a light and very high protective film on the metal surface; - during the process, it retains its performance characteristics unaltered. Generally its removal is not necessary, but can anyway be easily removed with any hydrocarbon-based solvent, or alkaline detergents.

Family: Rust preventives
Type: Vanishing base corrosion preventive

It is a dewatering protective fluids, which leaves on the surfaces, after the evaporation, a very light and little oily protective film. It is light, amber and odourless. It is obtained from a hydrocarbon particularly refined distilled, with an exclusive and particularly efficient combination of inhibitors of corrosion strongly active, which activate among them a synergic action. Properties: - it is extraordinarily efficient in the removing of the water; - it doesn’t leave nor spots neither residual on the treated surfaces; - it doesn’t tend to emulsify, not even with the presence of alkaline compounds; - it splits up very quickly and totally from the water removed from metallic surfaces following both processing with emulsified water and of alkaline washing; - it leaves on the metallic surfaces an ultra-light film, highly protective; - it keeps unchanged its performance characteristics during the service. The removal isn’t generally necessary but it can be easily made with any hydrocarbon solvent or chlorinate or with alkaline detergents.

Family: Rust preventives
Type: Vanishing base corrosion preventive

It’s a protective fluid, that leaves a waxy protective film on the treated surfaces, when the solvent vanished. It’s clear and dark with moderate odor. PROTEX V 6260 H is made by refined distilled hydrocarbons and a special combination of active corrosion inhibitors that create synergic action between them. The product tested excellent protection results both in salt mist and in homeostatic chamber. These are its properties: - Excellent antirust properties; - It leaves a soft film on the metal surfaces, which gives the maximum level of protection, such that it is also used for sea transport; - It maintains its properties performances during process in time. Removal is normally not necessary, but it’s easy to do with an alkaline wash or hydrocarbon solvent.

Family: Rust preventives
Type: Vanishing base corrosion preventive

PROTEX V 8026 is a protective liquid, with a very moderate odor that leaves a thin and oily film layer on treated surfaces after solvent evaporation. It comes from highly refined hydrocarbon distilled with specific protection for semi-finished products. PROTEX V 8026 has the following property: -High anti rust properties; -it leaves a thin, adhesive, highly protective film on semi-finished products; -it maintains its properties during operations over time; It’s not necessary to remove it, but you can easy do it with any petroleum solvent.

Family: Rust preventives
Type: Vanishing base corrosion preventive

Dewatering protective fluid that after the evaporation of the solvent leaves on the surfaces a thin veil very slightly oily. It shows clear, amber, odourless. It is obtained from a particularly refined hydrocarbon distillate, with an exclusive and particularly effective combination of strongly active corrosion inhibitors, which include a synergetic action. Isee of COV (volatile organic compounds). Has the following properties: -it is extraordinarily effective in removing water; -it leaves neither stains nor residues on the treated surfaces; -it does not tend to emulsiate, even in the presence of alkaline compounds; -it separates very quickly and totally from the water removed from the metallic surfaces following both mechanical machining with emulsified water and alkaline washes; -leaves an ultra-thin, highly protective film on metal surfaces; -maintains unchanged over time its performance characteristics in Service. The removal is not normally necessary, but it can be easily carried out with any petroleum solvent or alkaline detergents.

Family: Rust preventives
Type: Vanishing base corrosion preventive

It is a protective liquid with a very moderate odor, which after evaporation of the solvent leaves a thin, slightly waxy veil on the treated surfaces. It appears clear, amber. It is obtained from a particularly refined hydrocarbon distillate, with an exclusive and particularly effective combination of highly active corrosion inhibitors, which exert a synergistic action between them. The product was severely tested both in the Salina Chamber and in the Humidostatic Chamber, giving excellent results. It is free of VOC (Volatile Organic Compounds). It has the following properties: - Excellent and extraordinary anti-corrosion properties for protection against rust. - It is effective in removing any water from the treated surfaces, on which it leaves neither stains nor residues. - It leaves a thin, soft film on the metal surfaces, which gives a protection of the highest quality, such that it can also be used for transport by sea. - It keeps its performance characteristics in service unaltered over time. Removal is not normally necessary, but can still be easily carried out with an alkaline wash.

Family: Rust preventives
Type: Vanishing base corrosion preventive

It is a protective liquid, with a very moderate odor, which after the evaporation of the solvent leaves a thin oily film on the treated surfaces. It is clear, amber. It is obtained from a particularly refined hydrocarbon distillate, with an exclusive and particularly effective combination of highly active corrosion inhibitors, which perform a synergistic action between them. It is free from VOCs (Volatile Organic Compounds). It has the following properties: - Excellent anticorrosive properties of protection against rust. - It is effective in removing any presence of water from the treated surfaces - Leaves a thin, soft film on metal surfaces that gives a protection of the highest quality level, - Maintains its performance characteristics over time. Removal is not usually necessary, but can still be easily done with an alkaline wash.

Family: Rust preventives
Type: Oil base corrosion preventive

It is a new-concept, temporary, oil and mineral based, anti-rust protector containing volatile corrosion inhibitors and free from “dewatering” properties. It is designed for the protection of complex components in steel sheets and guarantees a good anti-rust power without causing darkening or staining. In particular, the anticorrosive additives guarantee an optimal protection also in closed systems, exercising between them a strong synergistic effect. It leaves an oily and adhesive film on the treated surfaces, for long-lasting protection

Prodotto ECO
Family: Industrial lubricants
Type: Special product

It is a white and odourless liquid, made as a detatching agent anti-spray and anti-adhesive for welding. PULISALD ECO is made of an aqueous biodegradable mixture of natural, polyglicol, inhibitor and metallic passivator esters. It is not flammable, free from siliconic compounds and not dangerous.

Family: Special products
Type: Special product

It is a clear liquid colourless lubricant, penetrating, anti-adhesive, synthetic, non-silicone, light, clear, odour-free, non-harmful, used as a non-stick cleaning product in plastic molding operations and especially in welding. In fact, it is particularly effective in welding operations in order to avoid the adhesion of the waste to the treated surface, without compromising in any way the quality of the welding itself, which in fact improves it. It is also used in laser cutting to improve the cleaning and finishes of the pieces.

Prodotto ECO
Family: Industrial lubricants
Type: Special product

It is a clear, colorless, water-based, penetrating, anti-adhesive liquid, with non-silicone lubricant additives, odor-free, non-harmful, used as a non-stick cleaning product in plastic molding operations and especially in welding. In particular, in welding operations it is particularly effective, as its formulation allows to avoid the adherence of the scrap on the treated surface, without however compromising in any way the quality of the welding itself, which in fact is improved. It is also used in laser cutting to improve the cleaning and finishing of the pieces.

Family: Industrial lubricants
Type: Neat quenching oil

It is a metal quenching oil obtained from a severely refined paraffinic mineral base solvent. The additivation is of a high quality level and guarantee: -accelerate quenching speed in order to produce more hardness components or to be able to use cheaper steels; -constant quenching speed in service, to ensure constant properties of steel components; -reduced sludge formation to reduce maintenance needs Of the plant and oil leaks; -minimum acid formation to avoid staining of the components and to increase the oxidation stability of the oil; -high resistance to cracking and distortions in treated steels, to increase flexibility in the design of components; -maximum hygienic-sanitary and environmental compatibility, with fumes reduced to minimum levels, thanks also to the high flash point of the base. Ultimately, the type of additive and the quality of the base oil used to obtain a high performance mineral-based hardening oil, resistant to thermal-oxidative decay and good detergent power for the cleaning of the System.

Family: Industrial lubricants
Type: Neat quenching oil

It’s an oil for quenching operations of metals, obtained from a paraffinic mineral base severely solvent-treated. The high quality addition guarantees: - accelerated speed of quenching, in order to produce harder components or use cheaper steels; - stable speed of quenching in order to ensure stable properties of the steel components; - low formation of sludge, to reduce the need for maintenance of the plant and the oil losses; - minimum formation of acids to prevent the components from staining and increase the oxidation stability of the oil; - high resistance to the formation of cracks and distortions in the treated steels, to increase the flexibility in the design of components; - maximum sanitary and environmental compatibility resulted from very low smokes, minimized thanks to the high flashpoint of the base. Finally, the type of addition and the quality of the base oil enable to obtain a mineral base oil for high performance quenching, resistant to thermal-oxidative decay and characterized by a good detergent power for the cleaning of the system.

Family: Industrial lubricants
Type: Neat quenching oil

It is a metal hardening oil obtained from a severely refined paraffinic mineral base solvent. The additivation is of a high quality level and guarantees an excellent constancy of the tempering of hardening when the temperature of the oil bath varies. This allows you to achieve the following benefits: -accelerate hardening speed in order to produce more hardness components or to be able to use cheaper steels; -constant and uniform properties of the treated pieces; -reduced sludge formation, to reduce the maintenance requirements of the plant and oil leaks; -minimum acid formation to avoid staining of the components and to increase the oxidation stability of the oil; -high resistance to cracking and distortions in treated steels, to increase flexibility in the design of components; -maximum hygienic-sanitary and environmental compatibility, with fumes reduced to minimum levels, thanks also to the high point of flame of the mineral base used. Ultimately, the type of additive and the quality of the base oil used to obtain a high performance mineral-based quenching oil, resistant to thermal-oxidative decay and with a good detergent power for the cleaning of the System.

Family: Industrial lubricants
Type: Neat quenching oil

It is a metal hardening oil obtained from a severely refined paraffinic mineral base solvent. The additivation is of a high quality level and guarantees an excellent constancy of the tempering of hardening when the temperature of the oil bath varies. This allows you to achieve the following benefits: -accelerate hardening speed in order to produce more hardness components or to be able to use cheaper steels; -constant and uniform properties of the treated pieces; -reduced sludge formation, to reduce the maintenance requirements of the plant and oil leaks; -minimum acid formation to avoid staining of the components and to increase the oxidation stability of the oil; -high resistance to cracking and distortions in treated steels, to increase flexibility in the design of components; -maximum hygienic-sanitary and environmental compatibility, with fumes reduced to minimum levels, thanks also to the high point of flame of the mineral base used. Ultimately, the type of additive and the quality of the base oil used to obtain a high performance mineral-based quenching oil, resistant to thermal-oxidative decay and with a good detergent power for the cleaning of the System.

Family: Industrial lubricants
Type: Neat quenching oil

It is a viscous oil for heat-hardening and isothermal metals, obtained from a severely refined paraffin mineral base. The additivation is of a high quality level and guarantees an excellent constancy of the tempering of hardening when the temperature of the oil bath Varies. This allows you to achieve the following benefits: -accelerate the hardening speed in order to produce more hardness components or to be able to use cheaper steels; -constant and uniform properties of the treated pieces; -reduced sludge formation, to reduce the maintenance requirements of the plant and oil leaks; -minimum acid formation to avoid staining of the components and to increase the oxidation stability of the oil; -high resistance to cracking and distortions in treated steels, to increase flexibility in the design of components; -maximum hygienic-sanitary and environmental compatibility, with fumes reduced to minimum levels, thanks also to the high point of flame of the mineral base used. Ultimately, the type of additive and the quality of the base oil used to obtain a high performance mineral-based hardening oil, resistant to thermal-oxidative decay and with good detergent power for the cleaning of the System.

Family: Industrial lubricants
Type: Neat quenching oil

It is a metal hardening oil obtained from a severely refined paraffinic mineral base solvent. The additivation is of a high quality level and guarantees an excellent constancy of the tempering of hardening when the temperature of the oil bath varies. This allows you to achieve the following benefits: -accelerate hardening speed in order to produce more hardness components or to be able to use cheaper steels; -constant and uniform properties of the treated pieces; -reduced sludge formation, to reduce the maintenance requirements of the plant and oil leaks; -minimum acid formation to avoid staining of the components and to increase the oxidation stability of the oil; -high resistance to cracking and distortions in treated steels, to increase flexibility in the design of components; -maximum hygienic-sanitary and environmental compatibility, with fumes reduced to minimum levels, thanks also to the high point of flame of the base. Ultimately, the type of additive and the quality of the base oil used to obtain a high performance mineral-based hardening oil, resistant to thermal-oxidative decay and good detergent power for the cleaning of the System.

Family: Industrial lubricants
Type: Neat quenching oil

It is an oil specifically formulated for hot and isothermal hardening of metals, of the highest quality level, obtained from a paraffinic mineral base severely refined with solvent. It is characterized by: - Very high thermal stability: the oil is well protected against sudden changes in temperature, which would otherwise cause the molecular breaking of the bonds and therefore the well-known "cracking" phenomena. -High resistance to oxidation: the oil, through appropriate additives, is able to withstand the chemical attack caused by flapping in the presence of oxygen (air), which would lead to the formation of sludge, sludge, carbon residues. -Very high drasticity of tempering, given by particular "wetting" additives, which by increasing the adhesion of the lubricant on the treated pieces, reduce the vapor layer originating from the liquid itself on the hot surface of the metal and bad conductor of heat ("calefaction") . - Excellent constancy of the drasticity of hardening as the temperature of the oil bath varies. -High resistance to crack formation and distortion in treated steels, to increase flexibility in component design. - Maximum hygienic-sanitary and environmental compatibility, with fumes reduced to minimum levels, thanks also to the high flame point of the base. In fact, the oil for tempering must remain as homogeneous as possible in every point of the fluid mass to have the property of continuously and rapidly subtracting the heat, both that which is produced in the exothermic transformation of crystallization and the internal one that tends to the outer surface of the metal. In this way the piece uniformly reaches the required characteristics of hardness, elasticity, breaking load, etc., even if it is of irregular shape. For all the characteristics listed above, QUENCH SP FS 22 belongs to the category of so-called “long life quenching oils” which maintain their performance relatively unaltered during the most severe operating conditions.

Family: Industrial lubricants
Type: Neat quenching oil

It is a specially formulated oil for the hardening of hot and isothermal metals, of maximum quality, characterised by: -very High Thermal Stability: The oil is well protected against sudden changes in temperature, which would otherwise cause the molecular rupture of the bonds and therefore the well-known "cracking" Phenomena. -high oxidation resistance: The oil, through a suitable additive, is able to withstand the chemical attack caused by the fluting in the presence of oxygen (air), which would determine the formation of melme, morchie, carbonic residues. -very High tempericity of tempera, conferred by special additives "wetting", which increasing the adhesion of the lubricant on the treated pieces, reduce the vapour layer originated from the liquid itself on the hot surface of the metal and bad conductor of heat (' calfaction '). -excellent constancy of the hardening of tempering when changing the temperature of the oil bath. -high resistance to cracks formation and distortions in treated steels, to increase the flexibility in the design of Components. In fact, the tempera oil must remain as homogeneous as possible at any point of the fluid mass to have the property of continuously and quickly subtract the heat, both the one produced in the exothermic transformation of the crystallization and the inner one that tends to cause the outer surface of the metal to be found. In this way the workpiece uniformly reaches the required characteristics of hardness, elasticity, breaking load, etc., even if it is irregular in shape. For all the features listed above the QUENCH SP FS 32 belongs to the category of so-called "long life quenching oils" that maintain their performance relatively unchanged during the most severe operating conditions.

Family: Industrial lubricants
Type: Neat quenching oil

It is a medium viscosity oil specifically formulated for the hardening of hot and isothermal metals, of the highest quality level, obtained from a paraffinic mineral base severely refined with solvent. The additives are of a high quality level and guarantee excellent consistency of the drastic hardening when the temperature of the oil bath changes. This allows you to achieve the following advantages: -Very high thermal stability: the oil is well protected against temperature changes, which would otherwise cause the molecular breakage of the bonds and therefore the well-known "cracking" phenomena. -High resistance to oxidation: the oil, through an appropriate additivation, is able to withstand the chemical attack caused by the flapping in the presence of oxygen (air), which would determine the formation of sludge, sludge, carbon residues. -High drastic hardening, conferred by particular «wetting» additives, which by increasing the adhesion of the lubricant on the treated pieces, reduce the layer of vapor originated by the liquid itself on the hot metal surface and poor heat conductor («calefaction»). -Excellent constancy of the drastic hardening when the oil bath temperature changes. -High resistance to crack formation and distortions in treated steels, to increase flexibility in component design. -High flame and fire points for safe operations. -Maximum hygiene-sanitary and environmental compatibility, with fumes reduced to minimum levels. In fact, the quenching oil must remain as homogeneous as possible at every point of the fluid mass in order to have the property of continuously and quickly removing the heat, both that which is produced in the exothermic transformation of the crystallization and the internal one that tends to recover the outer surface of the metal. In this way, the piece uniformly achieves the required characteristics of hardness, elasticity, breaking load, etc., even if it is irregular in shape. For all the characteristics listed above, the QUENCH SP FS 100 belongs to the category of so-called "long life quenching oils" which maintain their performance relatively unaltered during the most demanding operating conditions.

Family: Industrial lubricants
Type: Neat quenching oil

It is a metal hardening oil obtained from a severely refined paraffinic mineral base Solvent. The additivation is of a high quality level and guarantees an excellent constancy of the tempering of hardening when the temperature of the oil bath varies. This allows you to achieve the following benefits: -controlled quenching speed to obtain parts with specific hardness. -constant and uniform properties of the treated pieces. -reduced sludge formation, to reduce the maintenance requirements of the plant and oil leaks. -minimum acid formation to avoid staining of the components and to increase the oxidation stability of the Oil. -high resistance to cracks formation and distortions in treated steels, to increase the flexibility in the design of components. -maximum hygienic-sanitary and environmental compatibility, with fumes reduced to minimum levels, thanks also to the high point of flame of the Base. Ultimately, the type of additive and the quality of the base oil used to obtain a high performance mineral-based hardening oil, resistant to thermal-oxidative decay and good detergent power for the cleaning of the System.

Family: Industrial lubricants
Type: Synthetic compressors oil

It is a high-performance, non-toxic, fully synthetic oil, specifically designed to meet the most stringent lubrication requirements of industrial rotary and reciprocating compressors. It is made up of a blend of polyalphaolefins and synthetic carboxylic esters, all FDA approved for incidental contact with food, and is formulated to achieve the absence of deposits and a long service life being of the “ash-less” type, without ash. It contains a balanced blend of antioxidant additives that exert a synergistic effect on each other, allowing exceptional thermal-oxidative stability over the long term. The most important physical properties of this product, such as resistance to foam formation, demulsibility and flash point, are carefully controlled. It guarantees: -minimal or no formation of deposits and minimal risk of explosion, for high safety of use; -elimination of varnish and sludge deposits, to ensure that all components such as oil/air separators, intake valves, thermovalves etc. always function properly; -excellent demulsibility, necessary for rapid and complete separation of water in oil flow compressors, where condensate can accumulate in the receptors); -very high drain intervals, up to ten times compared to mineral-based compressor oils; -minimization of oil consumption, thanks to its low volatility and excellent lubricating properties; -high compressor efficiency, for reduced wear and maintenance costs; -excellent safety characteristics thanks to the high flash point and low volatility; -reduction of operating temperature, thanks to the high thermal conductivity, approximately 15% higher than a mineral oil; -very low Pour Point and high Viscosity Index of the synthetic base used, for optimum performance in a very wide operating temperature range.

Family: Industrial lubricants
Type: Synthetic compressors oil

It is a fully synthetic oil made up of high-performance Polyalkylene glycol-Polyester bases, specifically formulated for the lubrication of lubricated helical screw air compressors, with the following characteristics: - very high resistance to oxidation, which guarantees maximum duration of the charge, without alterations in the structure; - excellent anti-wear power and absence of carbon deposits and residues, essential properties to ensure a long life and perfect cleanliness of all moving mechanical parts, especially valves, for ideal compression performance; - natural high Viscosity Index and very low pour point, for correct operation of compressors in any climatic condition; - effective protection against corrosion and rust; - high Flash Point and consequent low volatility which guarantees reduced consumption; - excellent compatibility with paint gaskets and other compressor elements; - very long service life.

Family: Industrial lubricants
Type: Solvent-based industrial degreasing

It is a degreasing solvent for industrial uses, consisting of a de-aromatized mineral white spirit, free from benzene. The product is clear, with a very moderate odor, well tolerated by operators. It has an excellent degreasing power combined with a good evaporation speed. The pieces treated with RAISOL 40 D take on a shiny appearance, due to the presence of a limited surface layer, very thin, hydrocarbon, which also has a very mild protective action. It can also be used in open containers. Raisol 40 D evaporation value is 20-25 vs. nBuAc=100.

Family: Industrial lubricants
Type: Solvent-based industrial degreasing

It is a degreasing solvent for industrial uses, consisting of a de-aromatized mineral white spirit, free from benzene. The product is clear, with a very moderate odor, well tolerated by operators. It has an excellent degreasing power combined with a good evaporation speed. The pieces treated with RAISOL 60 D take on a shiny appearance, due to the presence of a limited surface layer, very thin, hydrocarbon, which also has a very mild protective action. It can also be used in open containers.

Family: Industrial Fluids
Type: Solvent-based industrial degreasing

RAISOL G is a degreasing solvent for industrial applications; it is made from isoparaffins denatured by synthetic esters. It is a clear, colourless and low smelling liquid, very friendly to workers. RAISOL G has an excellent degreasing power and a high evaporation rate. Machined pieces degreased by RAISOL G are clear and bright thanks to the presence of a thin protective hydrocarbon film. RAISOL G can be used in open containers too.

Family: Industrial Fluids
Type: Solvent-based industrial degreasing

It is a degreasing solvent for industrial uses, consisting of a mixture of isoparaffins, denatued with synthetic esters. The product is clear, very moderate odor, well tolerated by the operators. It has an excellent degreasing power combined with a fair evaporation rate. The product is free from volatile organic compounds in accordance with the 1999/13/CE Directive. The pieces treated with RAISOL N take on a shiny appearance, due to the presence of a very thin, hydrocarbon surface boundary layer, which also carries out a very mild protective action. It can also be used in open containers.

Prodotto ECO
Family: Industrial lubricants
Type: -

It is a typical lubricating oil for highly charged gears obtained from biodegradable synthetic esters, with anti-wear additives and EP type sulfur-phosphorus . Guarantees: -good resistance to thermal-oxidative decay; -A superior anti-wear and EP power, especially in comparison to the corresponding gear lubricants of the same gradation based on mineral oil; -A natural very high viscosity index: This means greater smoothness to cold and higher tightness of the viscosity at high temperatures; -Perfect compatibility with mineral oils.

Prodotto ECO
Family: Industrial lubricants
Type: -

It is a typical lubricating oil for highly charged gears obtained from biodegradable synthetic esters, with anti-wear additives and sulfur-phosphorus type EP. Guarantees: -good resistance to thermal-oxidative decay; superior anti-wear and EP power, especially in comparison to the corresponding gear lubricants of the same gradation based on mineral oil; -a natural very high viscosity index: this means greater smoothness to cold and higher tightness of the viscosity at high temperatures; -perfect compatibility with mineral oils.

Prodotto ECO
Family: Industrial lubricants
Type: -

It is a typical lubricating oil for highly charged gears obtained from biodegradable synthetic esters, with anti-wear additives and EP type sulfur-phosphorus . Guarantees: -good resistance to thermal-oxidative decay; -A superior anti-wear and EP power, especially in comparison to the corresponding gear lubricants of the same gradation based on mineral oil; -A natural very high viscosity index: this means greater smoothness to cold and higher tightness of the viscosity at high temperatures; -Perfect compatibility with mineral oils.

Prodotto ECO
Family: Industrial lubricants
Type: -

It is a typical lubricating oil for highly charged gears obtained from biodegradable synthetic esters, with anti-wear additives and EP type sulfur-phosphorus. Guarantees: -good resistance to thermal-oxidative decay; -A superior anti-wear and EP power, especially in comparison to the corresponding gear lubricants of the same gradation based on mineral oil; -A natural very high viscosity index: this means greater smoothness to cold and higher tightness of the viscosity at high temperatures; -Perfect compatibility with mineral oils.

Prodotto ECO
Family: Industrial lubricants
Type: -

It is an ashless lubricating oil, zinc-free, totally synthetic, biodegradable, with a high viscosity index, typical for highly charged gears. It is formulated with special saturated synthetic esters with an accurate package of anti-ash additives and sulphur-phosphorus-type EPS and against oxidation, rust and foam. Presents: -a high viscosity index of high mechanical strength of the synthetic base used, without addition of additives, for a consistent performance for long periods even in harsh conditions of operation; -Excellent and extraordinary resistance to thermal-oxidative decay, also thanks to the use of specific and exclusive additives; -A superior anti-wear power, especially against micropitting and in comparison to the corresponding gear lubricants of equal gradation based on mineral oil, and good EP properties of resistance to loads; -A very low natural sliding point; -strong chemical stability even at high temperatures; -Exceptional protection against corrosion, rust, foam; -Compatibility-mixability in all percentages with lubricants of mineral origin; -Excellent self-cleaning power, thanks to the polar structure of the esters; -Compatibility with all metals and their alloys used in normal machinery * *. * * Note: Around 90 ° C it is possible to have a moderate attack of the copper and its alloys, like the bronze, with relative blackening of the surfaces; However, it remains established that copper and its alloys act as powerful catalysts in the process of thermal and oxidative decay of the oil in operation, but to an exceptionally small extent compared to mineral oil. It is compatible with the best quality elastomers commonly found on the market such as: -fluorurated rubber (e.g. Viton); -PTFE (e.g. Teflon); -Butadiene Rubber acrylamnitrile (High nitrile): NBR-HNBR; -Fluorosiliconic rubber; -Silicone rubber or other rubbers, however, compatible with saturated synthetic esters.

Family: Industrial lubricants
Type: Gear mineral oil

It is a highly specialized lubricating oil, obtained from strictly selected and hydrophinized paraffinic mineral bases, specifically formulated to fully meet the demanding requirements of fast wire rod rolling mills both of Primetals Technologies ("Morgan No-Twist") and Danieli. However, it is a very versatile product, with high performance also for gear and bearing circulation systems. It is in fact characterized by: - excellent foam control and air release; - high oxidative stability and high resistance to thermal decay; - excellent protection against wear, rust and corrosion; - superior demulsibility, for rapid separation from water; - excellent protection of Copper.

Family: Industrial lubricants
Type: Gear mineral oil

It is a highly specialized lubricating oil, obtained from strictly selected and hydrophinized paraffinic mineral bases, specifically formulated to fully meet the demanding requirements of fast wire rod rolling mills both of Primetals Technologies ("Morgan No-Twist") and Danieli. However, it is a very versatile product, with high performance also for gear and bearing circulation systems. It is in fact characterized by: - excellent foam control and air release; - high oxidative stability and high resistance to thermal decay; - excellent protection against wear, rust and corrosion; - superior demulsibility, for rapid separation from water; - excellent protection of Copper.

Family: Industrial lubricants
Type: Gear mineral oil

It is a special lubricant characterized by an exceptional EP power, formulated with sulfur and phosphorus-based additives with the addition of molybdenum disulfide which, in a synergic relationship, create a particularly tenacious and resistant protective molecular patina on the metal surface. It has been carefully formulated to ensure: - high thermal-oxidative stability, to prevent the formation of sludge, lacquers and paints up to operating temperatures of 100-110° C - maximum EP power; - long oil performance duration even in severe operating conditions; - excellent anticorrosive properties; - good water separation capacity in the event of pollution and unforeseen events.

Family: Industrial lubricants
Type: Gear mineral oil

It is a lubricant characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the contact points of the gear teeth; this property is conferred by particular additives, based on sulfur and phosphorus in synergistic relationship, which create on the metal surface a particularly tenacious and resistant protective molecular film. It has been carefully formulated to ensure: - high thermal-oxidative stability, to prevent the formation of sludge, lacquer and varnish; - strong E.P. power; - service life of the oil in harsh operating conditions; - excellent anticorrosive properties.

Family: Industrial lubricants
Type: Gear mineral oil

It is a lubricant characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the contact points of the gear teeth; this property is conferred by particular additives, based on sulfur and phosphorus in synergistic relationship, which create on the metal surface a particularly tenacious and resistant protective molecular film. It has been carefully formulated to ensure: - high thermal-oxidative stability, to prevent the formation of sludge, lacquer and varnish; - strong E.P. power; - service life of the oil in harsh operating conditions; - excellent anticorrosive properties.

Family: Industrial lubricants
Type: Gear mineral oil

It is a lubricant characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the contact points of the gear teeth; this property is conferred by particular additives, based on sulfur and phosphorus in synergistic relationship, which create on the metal surface a particularly tenacious and resistant protective molecular film. It has been carefully formulated to ensure: - high thermal-oxidative stability, to prevent the formation of sludge, lacquer and varnish; - strong E.P. power; - service life of the oil in harsh operating conditions; - excellent anticorrosive properties.

Family: Industrial lubricants
Type: Gear mineral oil

It is a lubricant characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the contact points of the gear teeth; this property is conferred by particular additives, based on sulfur and phosphorus in synergistic relationship, which create on the metal surface a particularly tenacious and resistant protective molecular film. It has been carefully formulated to ensure: - high thermal-oxidative stability, to prevent the formation of sludge, lacquer and varnish; - strong E.P. power; - service life of the oil in harsh operating conditions; - excellent anticorrosive properties.

Family: Industrial lubricants
Type: Gear mineral oil

It is a lubricant characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the contact points of the gear teeth; this property is conferred by particular additives, based on sulfur and phosphorus in synergistic relationship, which create on the metal surface a particularly tenacious and resistant protective molecular film. It has been carefully formulated to ensure: - high thermal-oxidative stability, to prevent the formation of sludge, lacquer and varnish; - strong E.P. power; - service life of the oil in harsh operating conditions; - excellent anticorrosive properties.

Family: Industrial lubricants
Type: Gear mineral oil

It is a lubricant characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the contact points of the gear teeth; this property is conferred by particular additives, based on sulfur and phosphorus in synergistic relationship, which create on the metal surface a particularly tenacious and resistant protective molecular film. It has been carefully formulated to ensure: - high thermal-oxidative stability, to prevent the formation of sludge, lacquer and varnish; - strong E.P. power; - service life of the oil in harsh operating conditions; - excellent anticorrosive properties.

Family: Industrial lubricants
Type: Gear mineral oil

It is a lubricant characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the contact points of the gear teeth; this property is conferred by particular additives, based on sulfur and phosphorus in synergistic relationship, which create on the metal surface a particularly tenacious and resistant protective molecular film. It has been carefully formulated to ensure: - high thermal-oxidative stability, to prevent the formation of sludge, lacquer and varnish; - strong E.P. power; - service life of the oil in harsh operating conditions; - excellent anticorrosive properties.

Family: Forming and Drawing Lubricants
Type: Water-miscible hot drawing fluids

It is a water-soluble, ubricating coolant, particularly suitable for hot stamping on hammers and presses. It is also suitable for severe extrusion operations. It is formulated in accordance with the most recent toxicological acquisitions, in order to guarantee the best hygienic conditions of the working environment. It contains neither graphite nor petroleum derivatives; compared to graphitized and oil-based products of various types, it offers the following advantages: - considerable increase in mold life; - excellent sliding of the steel with total disintegration of the slag without flames, explosions or overheating; - absence of fumes, odors, dust. The solution in water is stable indefinitely, compatible with all materials commonly used in machine tools and in molds, and guarantees: - good covering and release power; - excellent resistance to high temperatures; - formation of a tenacious lubricating film, which ensures an excellent degree of flow of the material, necessary to obtain excellent surface finishes and maximum yield and duration of the molds; - excellent hygienic-sanitary and environmental compatibility.

Prodotto ECO
Family: Industrial lubricants
Type: -

It’s a state-of-the-art disarming, containing special additives with high anti-adhesive and release properties. Thanks to its special nature, SFORM S has all the characteristics required to optimise the operation, in fact the product simultaneously confers: - Physical action - Chemical action - Adhesive action - Surfactant action - Anti-rust action They guarantee a precise and safe dismantling of the formwork, eliminating any superficial imperfection, in the production of face-to-face castings.

Family: Special products
Type: Special product

It’s a state-of-the-art disarming, containing special additives with high anti-adhesive and release properties of a BIO nature. Thanks to its special nature, SFORM S ECO has all the characteristics required to optimise the operation, in fact the product simultaneously confers: - Physical action - Chemical action - Adhesive action - Surfactant action - Anti-rust action -Health and hygiene compatibility They guarantee a precise and safe dismantling of the formwork, eliminating any superficial imperfection, in the production of face-to-face castings.

Prodotto ECO
Family: Industrial Fluids
Type: Solvent-based industrial degreasing

It is a new degreasing solvent, totally synthetic-based, of ester nature, used effectively in a wide range of applications: - it is a powerful solvent suitable for dissolving resins and polymeric substrates of different nature; - it is non-toxic and compatible with the environment; - it is a non-flammable solvent, for safe operations; - it is free of VOCs (Volatile Organic Compounds) in accordance with Directive 199/13 / EC; - it is neither irritating, for both the eyes and the skin, nor sensitizing; - it is easily and readily biodegradable.

Family: Industrial greases
Type: Grease

It is a grease of universal use, particular, which differs from the traditional ones because the thickening agent is not a metallic soap but an inorganic synthetic material. The basic fluid is a special highly adhesive excellent Oil. The product is soft and tenacious, suitable for high temperatures, with a good anti-wear power and excellent anti-rust power and with an extremely low ash content. It is characterized as "infuse grease", which does not have a transitional phase, so its physical state remains unchanged, without hardening up to the operating temperature limit. The gradation is NLGI 1, with good water behaviour.

Family: Industrial greases
Type: Grease

It is a grease of universal use, particular, which differs from the traditional ones because the thickening agent is not a metallic soap but an inorganic synthetic material. The basic fluid is a special highly adhesive excellent oil. The product is soft and tenacious, suitable for high temperatures, with a good anti-wear power and excellent anti-rust power and with an extremely low ash content. It is characterized as "infuse grease", which does not have a transitional phase, so its physical state remains unchanged, without hardening up to the operating temperature limit. The gradation is NLGI 2, with good water behaviour.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a mineral-based hydraulic oil, obtained from paraffinic bases strictly solvent-refined and carefully selected; it features a Viscosity Index higher than the average for high-speed kinematics whenever the heavy-duty operations necessitate a lubricant with anti-wear properties in order to minimize the mechanical wear of the surfaces involved. It ensures: - Remarkable protection of the mechanical moving parts with tight tolerances; - Exceptional monitoring of the paints in testing for a prolonged period of time. - Maximum level of anti-wear power over time even for long-lasting operations, balanced by friction modifiers which ensure a sufficient static friction for wet clutch systems and parking brakes; - Extremely high resistance to oxidation, heat decay, hydrolysis and aging, resulting in a prolonged duration of service even in the presence of relatively high temperatures; - Great anti-foam, air release and demulsibility power; - Excellent anti-rust and anti-corrosion power on the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic oil obtained from paraffinic mineral bases that are strictly solvent-based and highly selected, with a higher Viscosity Index than the average, for oleo-dynamic controls, gears, bushings and kinematics in general, in all those cases where the heavy conditions of exercise require a lubricant with anti-wear properties, which minimizes the mechanical wear of pumps, valves and moving mechanical parts. The product ensures reliability and performance of the most modern hydraulic systems used in the most varied sectors: construction and earth moving, mines, fishing, marine, injection molding, etc. This oil has been developed to meet current and future demands of hydraulic systems and ensures: - marked protection of pumps and servo-valves with restricted tolerances; - excellent control of paints in tests of very long duration; - maximum level of anti-wear power over time, even for very long service life, balanced with friction modifiers that ensure sufficient static friction for wet clutch and parking brakes; - very high resistance to oxidation, thermal decay, hydrolysis and aging and therefore a long service life, even in the presence of relatively high temperatures; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It’s a hydraulic oil obtained from paraffinic mineral bases with a Viscosity Index higher than the average, for oleo-dynamic controls, gears, bushings and kinematics in general, in all those cases where the heavy conditions of exercise require a lubricant with anti-wear properties, which minimizes the mechanical wear of pumps, valves and moving mechanical parts. The product ensures reliability and performance of the most modern hydraulic systems used in the most various sectors: construction and earth moving, mines, fishing, marine, injection molding, etc. This oil has been developed to meet current and future demands of hydraulic systems and ensures: - marked protection of pumps and servo-valves with restricted tolerances; - excellent control of paints in tests of very long duration; - maximum level of anti-wear power over time, even for very long operating durations, balanced with friction modifiers that ensure sufficient static friction; - very high resistance to oxidation, thermal decay, hydrolysis and aging and therefore a long service life, even in the presence of relatively high temperatures; - excellent antifoam power, air release (“air release”) and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a hydraulic fluid, made from higly selected and solvent-refined paraffin bases, featuring an above-average viscosity index. It finds application with hydraulic systems, gears, bearings and kinematics in general whenever the heavy-duty conditions require a lubricant with anti-wear properties that minimize the mechanical wear of pumps, valves and other moving mechanical parts. The product ensures reliability and performance on the most modern hydraulic systems used in different sectors such as the construction and earth-moving industry, mining, fishing, the marine industry and with injection moulding processes and so on. The product has been formulated in order to satisfy the current and future needs of hydraulic systems and guarantees: - Remarkable protection of pumps and servo-valves with resticted tolerances - Excellent control of the paints with tests of extremely prolonged durations - Maximum level of anti-wear power over time even with prolonged durations of use, balanced with friction modifiers which ensure sufficient static friction - Extremely high resistance to oxidation, thermal decay, hydrolysis and aging which allows a greater life of the oil even in presence of relatively high temperatures - Great anti-foam, air release and demulsivity power - Excellent anti-rust and anti-corrosive power on the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It’s a hydraulic oil obtained from paraffinic mineral bases with a Viscosity Index higher than the average, for oleo-dynamic controls, gears, bushings and kinematics in general, in all those cases where the heavy conditions of exercise require a lubricant with anti-wear properties, which minimizes the mechanical wear of pumps, valves and moving mechanical parts. The product ensures reliability and performance of the most modern hydraulic systems used in the most various sectors: construction and earth moving, mines, fishing, marine, injection molding, etc. This oil has been developed to meet current and future demands of hydraulic systems and ensures: - marked protection of pumps and servo-valves with restricted tolerances; - excellent control of paints in tests of very long duration; - maximum level of anti-wear power over time, even for very long operating durations, balanced with friction modifiers that ensure sufficient static friction; - very high resistance to oxidation, thermal decay, hydrolysis and aging and therefore a long service life, even in the presence of relatively high temperatures; - excellent antifoam power, air release (“air release”) and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It’s a hydraulic oil obtained from paraffinic mineral bases with a Viscosity Index higher than the average, for oleo-dynamic controls, gears, bushings and kinematics in general, in all those cases where the heavy conditions of exercise require a lubricant with anti-wear properties, which minimizes the mechanical wear of pumps, valves and moving mechanical parts. The product ensures reliability and performance of the most modern hydraulic systems used in the most various sectors: construction and earth moving, mines, fishing, marine, injection molding, etc. This oil has been developed to meet current and future demands of hydraulic systems and ensures: - marked protection of pumps and servo-valves with restricted tolerances; - excellent control of paints in tests of very long duration; - maximum level of anti-wear power over time, even for very long operating durations, balanced with friction modifiers that ensure sufficient static friction; - very high resistance to oxidation, thermal decay, hydrolysis and aging and therefore a long service life, even in the presence of relatively high temperatures; - excellent antifoam power, air release (“air release”) and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a special oil, of low viscosity, ISO VG 10, obtained mainly from a synthetic hydrocarbon base, with anti-rust additives, antioxidants and anti-wear, studied for the lubrication of the fast spindles of the machine tools. Presents: -Exceptional thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of the eventual water; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Low viscosity, to ensure the correct functioning of the KINEMATISMS operating at high speed of rotation; -Very light, clear color.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a mineral oil based on paraffin, particularly excellent, studied for circulation systems and hydraulic circuits, where are required in particular strong anti-rust properties and resistance against oxidation. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a mineral oil based on paraffin, particularly excellent, studied for circulation systems, hydraulic circuits and reciprocating air compressors, where it is required in particular strong anti-rust properties and resistance against oxidation. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a mineral oil based on paraffin, particularly excellent, studied for circulation systems, hydraulic circuits and reciprocating air compressors, where it is required in particular strong anti-rust properties and resistance against oxidation. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a mineral oil based on paraffin, particularly excellent, studied for circulation systems, hydraulic circuits and reciprocating air compressors, where it is required in particular strong anti-rust properties and resistance against oxidation. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a mineral oil based on paraffin, particularly excellent, studied for circulation systems, hydraulic circuits and reciprocating air compressors, where it is required in particular strong anti-rust properties and resistance against oxidation. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a mineral oil based on paraffin, particularly excellent, studied for systems with circulation, hydraulic circuits ì and reciprocating air compressors, where are required in particular strong antirust properties and resistance against oxidation. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a particularly excellent paraffin based mineral oil, designed for reciprocating systems and alternative air compressors, where anti-rust properties and resistance against oxidation are particularly required. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air (""air release""); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a particularly excellent paraffin based mineral oil, designed for reciprocating systems and alternative air compressors, where anti-rust properties and resistance against oxidation are particularly required. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a particularly excellent paraffin based mineral oil, designed for reciprocating systems and alternative air compressors, where anti-rust properties and resistance against oxidation are particularly required. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a mineral oil based on paraffin, particularly excellent, studied for circulation systems, where are required particularly strong anti-rust properties and resistance against oxidation. Presents: -Significant thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -Excellent demulsive properties, for a rapid separation of water, if any; -Excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -Excellent filterability; -Excellent protection against rust; -Good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -Compatibility with elastomers normally used in sealing gaskets; -Ability to quickly release the retained air ("air release"); -Light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a lubricating mineral oil based on paraffin, particularly excellent, studied for systems where it is required in particular strong anti-rust properties and resistance against oxidation. Presents: -significant Thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -excellent demulsive properties, for a rapid separation of water, if any; -excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -excellent filterability; -excellent Protection against rust; -good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -compatibility with elastomers normally used in sealing gaskets; -ability to quickly release the retained air ("air release"); -light color, clear. .

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a lubricating mineral oil based on paraffin, particularly excellent, studied for systems where it is required in particular strong anti-rust properties and resistance against Oxidation. Presents: -significant Thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -excellent demulsive properties, for a rapid separation of water, if any; -excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -excellent filterability; -excellent protection against rust; -good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -compatibility with elastomers normally used in sealing gaskets; -ability to quickly release the retained air (""air release""); -light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a lubricating mineral oil based on paraffin, particularly excellent, studied for systems where it is required in particular strong anti-rust properties and resistance against oxidation. Presents: -significant Thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -excellent demulsive properties, for a rapid separation of water, if any; -excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -excellent filterability; -excellent Protection against rust; -good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -compatibility with elastomers normally used in sealing gaskets; -ability to quickly release the retained air ("air release"); -light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a particularly excellent paraffin-based lubricating mineral oil, designed for systems where anti-rust properties and oxidation resistance are particularly required. Presents: -significant Thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -excellent demulsive properties, for a rapid separation of water, if any; -excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -excellent filterability; -excellent Protection against rust; -good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -compatibility with elastomers normally used in sealing gaskets; -ability to quickly release the retained air ("air release"); -light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a particularly excellent paraffin-based lubricating mineral oil, designed for systems where anti-rust properties and oxidation resistance are particularly required. Presents: -significant Thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -excellent demulsive properties, for a rapid separation of water, if any; -excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -excellent filterabilit -excellent Protection against rust; -good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -compatibility with elastomers normally used in sealing gaskets; -ability to quickly release the retained air ("air release"); -light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a particularly excellent paraffin based mineral oil, designed for circulation systems, hydraulic circuits and alternative air compressors, where there are particularly strong anti-rust properties and resistance against the oxidation. Presents: -significant Thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints -excellent demulsive properties, for a rapid separation of water, if any; -excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -excellent filterabyt -excellent Protection against rust; -good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -compatibility with elastomers normally used in sealing gaskets; -ability to quickly release the retained air ("air release"); -light color, clear.

Family: Industrial lubricants
Type: Mineral lubricating oil

It is a particularly excellent paraffin based mineral oil, studied for circulating systems, hydraulic circuits and reciprocating air compressors, where it is required in particular strong anti-rust properties and resistance against the oxidation. Presents: -significant Thermal and oxidative stability, to extend the life of the lubricant in the absence of sludge, lacquers and paints; -excellent demulsive properties, for a rapid separation of water, if any; -excellent hydrolyic stability to protect the circuit from corrosion in the event of water presence; -excellent filterabilit -excellent Protection against rust; -good anti-wear characteristics; -carbonous residue, foam and particularly low volatility and high flash point; -compatibility with elastomers normally used in sealing gaskets; -ability to quickly release the retained air ("air release"); -light color, clear.

Family: Industrial lubricants
Type: Synthetic lubricating oil

It is a totally synthetic oil based on highly isoparaffinic hydrogenated hydrocarbons, particularly formulated to satisfy the most demanding lubrication needs of steam, gas and hydraulic turbines, being characterised by the following Property: -maximum resistance to thermal-oxidative decay, to prevent the formation of sludge and to guarantee a perfect function of the oil in the long term, even in the presence of high temperatures and water; -high natural viscosity index, precisely of the synthetic base used, obtained without the addition of additives; -maximum Antirust and Anticorrosive power; -excellent power of separation from the air, high resistance to the formation of foam and excellent demulsive power; -excellent filterability; -complete compatibility and total miscibility with mineral-based corresponding oils. All these properties are guaranteed by the quality of the synthetic base used, the particular refining process and the presence of selected inhibitory additives of the ageing process.

Family: Industrial lubricants
Type: Synthetic lubricating oil

It is a totally synthetic oil based on highly isoparaffinic hydrogenated hydrocarbons, particularly formulated to satisfy the most demanding lubrication needs of steam, gas and hydraulic turbines, being characterised by the following Property: -maximum resistance to thermal-oxidative decay, to prevent the formation of sludge and to guarantee a perfect function of the oil in the long term, even in the presence of high temperatures and water; -high natural viscosity index, precisely of the synthetic base used, obtained without the addition of additives; -maximum Antirust and Anticorrosive power; -excellent power of separation from the air, high resistance to the formation of foam and excellent demulsive power; -excellent filterability; -complete compatibility and total miscibility with mineral-based corresponding oils. All these properties are guaranteed by the quality of the synthetic base used, the particular refining process and the presence of selected inhibitory additives of the ageing process.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It’s a high index viscosity hydraulic oil for hydraulic controls, gears, bearings and kinematics. It’s useful for those heavy operations in which is required an anti-wear property helping minimize mechanical wear, valves and mechanical parts in movement. The product ensure reliability and performance of the modern hydraulic systems in different fields, such as: construction and land handling, mining, fishing, marine, injection moulding.. SPRINTER FHP 15 ensures: - Specific hydraulic performance - Wear reduction - Valves bonding - Metal removing - High performance even in heavy operations - High resistance with higher temperatures - Resistance to oxidative decay This type of product guarantees: - Excellent valves protection, even in hard conditions - Excellent varnishes control during long lasting test - High oxidation resistance in TOST test - High hydrolytic stability

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is an oil with a very high Viscosity Index, for hydraulic controls, gears, bushings and kinematic mechanisms in general, in all those cases where the severe operating conditions require a lubricant with properties anti-wear, which minimizes the mechanical wear of pumps, valves and moving mechanical parts. The product ensures reliability and performance of modern hydraulic systems used in the most varied sectors: construction and earthmoving, mines, fishing, marine, injection molding, etc. In addition to satisfying all the most important global hydraulic performance specifications, it reduces wear, valve bonding, metal removal and filterability problems; it also meets the needs of the most demanding work cycles (for example in the continuous production or continuous service of loaned equipment) and resists oxidative decay at the highest operating temperatures. This oil has been developed to meet the current and future demands of hydraulic oils and ensures: - strong protection of the pumps, even in very severe operating conditions; - superior viscoelastic resistance to intermittent loads; - excellent control of paints in tests of very long duration; - very high oxidation resistance in the TOST test; - remarkable hydrolytic stability.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a “detergent” hydraulic fluid for hydraulic controls, bearings, gears and kinematics in general. It finds application whenever the heavy-duty conditions require a lubricant with ISO VG 22 gradation and anti-wear properties in order to minimize the mechanical strain of pumps, valves and any other moving mechanical component in general. It is classified HLP-D which makes it different from regular hydraulic oils (classified HLP) as, instead of having demulsive properties (to guarantee quick separation from water), can absorb up to 0,25%p of water without losing its technical characteristics and other issues. It is constituted by: - Mineral bases with a very narrow distillation cut and solvent-refined, higly selected as for both the initial crude oil and also the refining process, which involves a final hydrotreatment. - Additives with anti-wear, anti-oxidant, anti-rust, anti-foam and “air release” properties of the highest quality. Modern hydraulic circuits of power transmissions, equipped with extremely efficient filtration systems (even below 1 micron), allow to not only achieve great levels of efficiency but also a superior duration of the oil charge. The product guarantees over time all of the required properties, which are the following: - Highest level of anti-wear power over time, for durations superior to 25.000 hours, as confirmed by analytical monitoring; - Highest level of oil filterability (even at the lowest levels of micrometric measurements) to not only avoid filters clogging but additives deplation as well; - Exceptional resistance to oxidation, thermal decay, hydrolysis and aging, achieved thanks to a quality selection of both the base and the additives used. - Great anti-foam and “air release” power; - Excellent anti-rust power and properties of anti-corrosion of the mechanical parts; - High detergent power to improve the cleaning level of the hydraulic circuits, particularly of the valves and to prevent residues and rubber formations, especially if caused by small amounts of water absorbed in oil (up to 0,25%) without altering its quality; - Reduction of the seals wear, improving the lubrication of the metal-in-elastomer contact.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a "detergent" type hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, in all those cases in which the severe operating conditions require a lubricant having an ISO VG 32 grade with anti-wear properties, which reduces to a minimum mechanical wear of pumps, valves and mechanical parts in general in motion. It is classified HLP-D and therefore differs from normal hydraulic oils (classified HLP) in that, instead of having demulsive properties (i.e. rapid separation from water), it can absorb up to 0.25% w of water without problems, that is, without losing its technological characteristics. It is made up: -mineral bases having a very narrow distillation cut, severely solvent refined and highly selected as regards both the starting crude oil and the refining process, which involves a final hydrogen treatment; -additives with antiwear, antioxidant, antirust, antifoam and "air release" properties of the highest quality level. The modern hydraulic power transmission circuits, in fact, equipped with extremely efficient filtration systems (down to 1 micron) allow to obtain not only a very high operating efficiency, but also exceptional duration of the oil charge, unthinkable. only until a few years ago. The following properties are thus required of the oil, all guaranteed over time by the SPRINTER HLP-D 32: - maximum level of anti-wear power over time, for operating durations exceeding 25,000 hours, as verified by analytical monitoring; - maximum degree of oil filterability (even at the lowest micrometres to avoid not only the clogging of the filters, but also the depletion of additives; - exceptional resistance to oxidation, thermal decay, hydrolysis, and aging of the oil, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam and air release power ("air release"); - excellent anti-rust and anti-corrosion power of mechanical parts; - high detergent power to improve the cleaning of the hydraulic circuit, in particular of the valves, and prevent the formation of deposits and gums, especially if caused by the presence of small quantities of water, which is incorporated into the oil (up to 0.25% ) without altering its quality; -reduction of wear on the seals, improving the lubrication of the elastomer-metal contact.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It’s a detergent hydraulic oil for hydraulic and kinematic system, bearings and gears. It is suitable for those heavy operating conditions in which is required a lubricant with ISO VG 46 grade and anti-wear properties that reduced the mechanical wear of pumps, valves and mechanical parts. It has a HLP-D classification, so it differs from normal hydraulic oils (HLP-D classified), not for its demulsifying properties, but because of the capacity of absorbing water up to 0,25%, without detaching from its own technological properties. It’s made up of: - Solvent highly selected and refined mineral bases with a restricted distillation cut, regarding both the starting crude oil and the refining process, which involves a final hydrogen treatment; - Additives with anti-wear, antioxidant, antirust, antifoam and “air release” properties of the highest quality level. The modern hydraulic power transmission circuits have an extremely efficient filtration system (below 1 micron) which helps to gain exceptional life times of the oil charge that was not possible until few years ago. It guarantees: - Excellent anti-wear property level during time, more than 25.000 hours, as verified by analytical monitoring; - Maximum grade of filterability oil; - Excellent resistance to oxidation, thermal decay, hydrolis and aging of the oil, through a qualitative selection both of the base and the additives used. - Excellent anti foam and air release property; - Excellent antirust and anticorrosive power of mechanical parts; - High detergent power, which improve the cleansing of hydraulic circuit, in particular for valves. It allows preventing dirt and wheels formation, especially if formed by water presence in the oil (up to 0,25%) without changing its properties; - Reduction of seal wear improving the elastomer-metal contact lubrication.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is a "detergent" type hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, in all those cases in which the severe operating conditions require a lubricant having an ISO VG 68 grade with anti-wear properties, which reduces to a minimum mechanical wear of pumps, valves and mechanical parts in general in motion. It is classified HLP-D and therefore differs from normal hydraulic oils (classified HLP) in that, instead of having demulsive properties (i.e. rapid separation from water), it can absorb up to 0.25% w of water without problems, that is, without losing its technological characteristics. It is made up: -mineral bases having a very narrow distillation cut, severely solvent refined and highly selected as regards both the starting crude oil and the refining process, which involves a final hydrogen treatment; - additives with antiwear, antioxidant, antirust, antifoam and "air release" properties of the highest quality level. The modern hydraulic power transmission circuits, in fact, equipped with extremely efficient filtration systems (down to 1 micron) allow to obtain not only a very high operating efficiency, but also exceptional duration of the oil charge, unthinkable. only until a few years ago. The following properties are thus required of the oil, all guaranteed over time by the SPRINTER HLP-D 68: - maximum level of anti-wear power over time, for operating durations exceeding 25,000 hours, as verified by analytical monitoring; - maximum degree of oil filterability (even at the lowest micrometres to avoid not only the clogging of the filters, but also the depletion of additives; - exceptional resistance to oxidation, thermal decay, hydrolysis, and aging of the oil, obtained through the qualitative selection of both the base and the additives used; - excellent antifoam and air release power ("air release"); - excellent anti-rust and anti-corrosion power of mechanical parts; - high detergent power to improve the cleaning of the hydraulic circuit, in particular the valves, and prevent the formation of deposits and gums, especially if caused by the presence of small quantities of water, which is incorporated into the oil (up to 0.25% ) without altering its quality; -reduction of wear of the seals, improving the lubrication of the elastomer-metal contact.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is an oil with a high viscosity index, for oleo-dynamic controls, gears, bushings and kinematics in general, in all those cases in which the heavy operating conditions require a lubricant with anti-wear properties, which minimizes the mechanical wear of pumps, valves and moving mechanical parts. The product ensures reliability and performance of modern hydraulic systems used in the most varied sectors: construction and earth moving, mining, fishing, marine, injection molding, etc. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve bonding, metal removal and filterability problems; it also meets the needs of the most demanding work cycles (for example in continuous production or in the continuous service of loan equipment for use) and resists oxidative decay at high operating temperatures. It provides: - strong protection of the pumps, even under severe operating conditions; - superior viscoelastic resistance to intermittent loads; - excellent control of paints in tests of very long duration; - very high resistance to oxidation in the TOST test; - considerable hydrolytic stability.

Family: Industrial lubricants
Type: Mineral hydraulic oil

It is an oil with a high viscosity index, for hydraulic controls, gears, bushings and kinematic mechanisms in general, in all those cases where the severe operating conditions require a lubricant with properties antiwear, which minimizes the mechanical wear of pumps, valves and mechanical parts in motion. The product ensures the reliability and performance of modern hydraulic systems used in the most varied sectors: construction and earth moving, mining, fishing, marine, injection molding, etc. In addition to meeting all the most important global hydraulic performance specifications, it reduces wear, valve sticking, metal removal and filterability problems; it also meets the needs of the heaviest work cycles (for example in continuous production or continuous service of equipment on loan) and resists oxidative decay at high operating temperatures. Ensures: - outstanding protection of the pumps, even in very severe operating conditions; - superior viscoelastic resistance to intermittent loads; - excellent control of paints in very long life tests; - very high resistance to oxidation in the TOST test; - remarkable hydrolytic stability.

Family: Industrial lubricants
Type: Synthetic hydraulic oil

It is a hydraulic oil for hydraulic controls, bearings, gears and kinematics in general, with a high viscosity index, suitable in all those cases where the harsh operating conditions require a lubricant with an ISO VG 46 grade with anti-wear properties, which reduces to minimum mechanical wear of pumps, valves and mechanical parts usually in motion. It is particularly suitable in all those cases where, due to the heavy operating conditions or to the construction design or to the environmental temperature conditions (high temperature changes), it is necessary to use an anti-wear oil with a viscosity index particularly high and with excellent fluidity at low temperatures. It is also recommended when the possible overheating of the oil could cause a reduction in viscosity that could compromise the functionality and efficiency of the hydraulic circuit. The high viscosity index guarantees a lower viscosity reduction as the temperature increases. It is a "stabilized" oil, in the sense that it retains its chemical-physical and technological properties for long periods of service, making it particularly suitable for hydraulic circuits and hydrostatic lubrication systems operating under severe operating conditions, due to pressure , operating temperature range, oil charge circulation ratio, water pollution risk, etc. It is “ashless”, fully synthetic hydrocarbon-based, with anti-wear additives, anti-corrosive antioxidants free of zinc. Thanks to this, SPRINTER SY HVI ZF 46 allows a very long stay in service of the charges, even in the presence of high operating temperatures and high amounts of air, conditions that exacerbate the tendency to thermal-oxidative decay of the oil. Provided that the filtration system has been carefully studied according to the level of cleaning required by the components in the circuit, this oil, compared with conventional mineral based hydraulic oils, avoids the occurrence of irregular functioning of the servovalves and the clogging of the filters caused by the formation of sludge and deposits. It retains, finely dispersed in emulsion, a small amount of water, such as that due to atmospheric condensation, preventing it from compromising the proper functioning of the hydraulic circuit. In the case of pollution caused by large quantities of water, SPRINTER SY HVI ZF 46 allows rapid separation and purging. It also guarantees the constant presence of a veil of oil on all the lubricated surfaces, to which, even if in very thin layer, it offers an effective protection against rust, both during service and during periods of plant standstill. The modern power transmission hydraulic circuits, in fact, equipped with extremely efficient filtration systems (up to 1 micron below), allow not only to obtain a very high operating performance, but also exceptional durability of oil charge, unthinkable only until a few years ago. The following properties are required for oil, all guaranteed over time by SPRINTER SY HVI ZF 46: - maximum level of anti-wear power over time of ashless type, without ash, for durations of over 25,000 hours, as verified by analytical monitoring; - maximum degree of filterability of the oil (even at the lowest micrometre) to avoid not only the clogging of the filters, but also the depletion of the additives; - extraordinary resistance to oxidation, thermal decay, hydrolysis and aging of oil, obtained through the qualitative selection of both the synthetic base and the additives used; - excellent antifoam power, air release ("air release") and water demulsion; - excellent anti-rust and anticorrosive power of the mechanical parts. It also has a very high Viscosity Index for: - reduce the loss of viscosity in the presence of high temperatures and thus guarantee the efficiency of the power transmission system; - improve the viscoelastic response of the oil to intermittent loading stresses.

Family: Industrial lubricants
Type: Synthetic hydraulic oil

It is an anti-wear hydraulic oil, with an ISO VG 46 "stabilized" gradation, in the sense that it retains its chemical and physical properties for long periods of service, making it particularly suitable for hydraulic circuits and hydrostatic lubrication systems operating under conditions harsh operating conditions, by pressure, operating temperature range (thanks to the very high viscosity index), oil charge circulation ratio, water pollution risk, etc. It is a 100% synthetic oil, based on Polyolefins, mixed with antioxidant additives, anticorrosive and viscosity index improvers. Thanks to this SPRINTER SY PO HVI 46 allows a very long stay in service of the charges even in the presence of high operating temperatures and high amounts of air, conditions that exacerbate the tendency to thermal-oxidative decay of the oil. As long as the filtration system has been carefully studied according to the level of cleaning required by the components of the circuit, this oil, compared to conventional mineral based hydraulic oils, avoids the occurrence of irregular functioning of the servovalves and the clogging of the filters caused by the formation of sludge and deposits. It keeps finely dispersed in emulsion a small amount of water such as that due to atmospheric condensation, preventing it from compromising the good functioning of the hydraulic circuit. In the case of pollution caused by large quantities of water, SPRINTER SY PO HVI 46 allows rapid separation and purging. It also guarantees the constant presence of a veil of oil on all the lubricated surfaces, which, even if in a very thin layer, offers an effective protection against rust both during service and during periods of plant standstill. Presented by: - excellent anti-wear and anti-corrosion properties and viscoelastic resistance to intermittent loads; - very high Viscosity Index; - exceptional resistance to thermal-oxidative decay. - an excellent tendency to release the air; - excellent filterability even in the presence of the finest and most sophisticated filtering systems; - very high resistance to foam formation.

Family: Industrial lubricants
Type: Synthetic hydraulic oil

It is a hydraulic fluid with a high viscosity index for hydraulic systems, bearings, gears and kinematics in general. It is particularly suitable when the heavy-duty conditions necessitate an ISO VG 46 gradation lubricant with excellent anti-wear properties to minimize the mechanical wear of pumps, valves and other moving mechanical parts. It also finds application whenever either the heavy-duty conditions, the constructive design or the environmental conditions (high temperature fluctuations) require an anti-wear lubricant with a high viscosity index and great lubricity at low temperatures. The product is also recommended whenever a possible heating of the lubricant might cause a reduction in viscosity capable of compromising the correct functionality and efficiency of the hydraulic circuit. The high viscosity index in fact guarantees a lower reduction in viscosity with increasing temperature. It is a “stabilized” lubricant that retains for long periods of time the chemical-physical and technological properties which make it particularly suitable for hydraulic systems and hydrostatic lubrication systems operating in heavy-duty conditions because of pressure, range of working temperature and oil charge circulation, risk of pollution with water, etc. It is made from a totally synthetic hydrocarbon base, zinc-free and mixed with anti-wear, anti-oxidant and anti-corrosive additives of the “ashless” type. For this reason, the product allows the charges to last for very long durations even in presence of high operating temperatures and air quantities, conditions that exasperate the oxidative-thermal decay tendency of the lubricant. The product, confronted with other conventional mineral hydraulic fluids, prevents both the outbreak of irregolarities in the servovalves and clogging of the filters caused by sludge and residues formations. It retains a small amount of water, finely dispersed in the emulsion and similar to atmospheric condensation, preventing it from compromising the correct functioning of the hydraulic circuit. In case of pollution from substantial water contents, the product allows quick separation and effective clogging. It also guarantees the constant presence of a lubricant veil on every surface which offers effective rust protection during both usage and stoppage times of the systems. Modern hydraulic circuits of power transmission, equipped with extremely efficient filtration systems (even below 1 micron), allow it to not only achieve high performances but also exceptional durations of the oil charge. The lubricant guarantees all of the following properties: - Exceptional anti-wear power of the “ashless” type (without ashes) over time for operations longer than 25.000 hours as verified by analytical monitorings - Maximum filterability level of the lubricant (even at the lowest micrometrics) to not only prevent the clogging of the filters but also the additives impoverishment - Great resistance to oxidation, thermal decay, hydrolysis and aging of the oil, obtained through qualitative selection of both the synthetic base and the additives used - Great anti-foam, air-release and demulsivity power - Excellent anti-rust and anti-corrosion of the mechanical parts power. It also features a high viscosity index which, coming from the synthetic base, keeps itself constant during all of the oil charge duration, allowing the product to significantly reduce the viscosity loss in presence of high temperatures and to retain constant efficiency of the power transmission system

Family: Industrial lubricants
Type: Synthetic hydraulic oil

It is a hydraulic oil resistant with a gradation ISO VG 15 ""stabilized"", in the sense that it preserves for long periods of service its chemical properties physical and technological, making it particularly suitable for the hydraulic circuits and the lubrication plants hydrostatics operating in harsh operating conditions, by pressure, operating temperature range (thanks to the extraordinarily high viscosity index), the flow ratio of the oil charge, the risk of water pollution, etc. It is a 100% synthetic hydrocarbon based oil, in combination with antioxidant, anticorrosive and imhidic additives of the viscosity Index. Thanks to this SPRINTER VHVI-LP 15 allows a very long stay in service of the charges even in the presence of high operating temperatures and high quantities of air, conditions that exacerbation the tendency to the thermal-oxidative decay of the Oil. As long as the filtration system has been carefully studied according to the level of cleanliness required by the components of the circuit, this oil, compared with conventional mineral-based hydraulic oils, avoids the occurrence of irregularities of operation of the servo valves and the clogging of the filters caused by the formation of sludge and deposits. It retains finely dispersed emulsion a small quantity of water like that due to atmospheric condensation, preventing it from compromising the good functioning of the hydraulic circuit. In the case of pollution by substantial quantities of water, SPRINTER VHVI-LP 15 allows rapid separation and bleeding. It also guarantees the constant presence of a layer of oil on all lubricated surfaces, which, even if in very thin layers, offers effective protection against rust both during service and during the staging periods of the plant. Presents: -excellent anti-wear and anticorrosive power and viscoelastic resistance to intermittent loads; -extraordinarily high viscosity index; -exceptional resistance to thermal-oxidative decay; -an excellent tendency to release air; -excellent filterability even in the presence of the finest and most sophisticated filtration systems; -very high resistance to foam formation; -a Very low sliding point; -excellent corrosion and wear protection characteristics; -perfect compatibility with seals; -high demulsività, i.e. a rapid water separation rate that may be present in the circuit.

Family: Industrial lubricants
Type: Synthetic hydraulic oil

It is a "stabilized" anti-wear hydraulic oil, in the sense that it retains its chemical, physical and technological properties for long periods of service, which make it particularly suitable for hydraulic circuits and hydrostatic lubrication systems operating in severe operating conditions, for pressure, operating temperature range (due to the extraordinarily high viscosity index), circulation ratio of the oil charge, risk of pollution with water, etc. It is a 100% synthetic hydrocarbon based oil, mixed with antioxidant, anti-corrosion and viscosity index improver additives. Thanks to this, SPRINTER VHVI-LP 22 allows the charges to remain in service for a very long time even in the presence of high operating temperatures and high quantities of air, conditions which exacerbate the tendency towards thermal-oxidative decay of the oil. Since the filtration system has been carefully studied according to the level of cleanliness required by the circuit components, this oil, compared with conventional mineral-based hydraulic oils, avoids the onset of irregularities in the operation of the servovalves and the integration of the filters caused by the formation of sludge and deposits. It retains a small quantity of water, finely dispersed in an emulsion, such as that due to atmospheric condensation, preventing it from compromising the proper functioning of the hydraulic circuit. However, in the case of pollution caused by large quantities of water, SPRINTER VHVI-LP 22 allows rapid separation and drainage. It also guarantees the constant presence of a film of oil on all lubricated surfaces, which, even if in a very thin layer, offers effective protection from rust both during service and during plant downtime. Presents: • excellent anti-wear and anti-corrosive power and viscoelastic resistance to intermittent loads; • extraordinarily high Viscosity index; • exceptional resistance to thermal-oxidative decay; • an excellent tendency to release air • excellent filterability even in the presence of the finest and most sophisticated filtering systems; • very high resistance to foam formation; • a very low pour point; • excellent protection characteristics against corrosion and wear; • perfect compatibility with gaskets; • high demulsibility, i.e. a rapid separation speed of any water present in the circuit.

Family: Industrial lubricants
Type: -

SRG 6 ITM is an entirely synthetic lubricant oil, based on refined polyglycols. It is used for gears, bearings, support and kinematic system lubrication at high temperature, even with heavy and oscillating loads. SRG 6 ITM is a complex and technological product as a result of high quality research in internal laboratory and then tested “on field”. It assures advantages both in prestations and in energy saving. Description base and additives: - Antioxidant; - E.P. and anti-wear, formed by the combination of Phosphorus and inactive Sulfur; - Antirust; - Anticorrosive; - Friction modifiers that create synergical effect between them and guarantee: - Excellent resistance to long-term thermal-oxidative decaas well in absence of sludge and residues, extremely better than a normal mineral oil; - Excent V.I. maintained over time in the synthetic base used that assures limited viscosity variation during all oil process; - Excellent antiwear and E.P. power, during all the long life of the product, for kinematic system efficienty conservation, above all in heavy and long stress mechanical conditions.

Family: Industrial lubricants
Type: -

It is a totally synthetic lubricant, based on Polyglycols, intended for the lubrication of gears, bearings, supports and kinematisms operating at high temperature, even under heavy loads. The base used and the type of antioxidant, anti-wear, antirust and anticorrosive additives guarantee a long-term thermal-oxidative resistance, in the absence of sludge and residues, at least two and a half times that of a normal mineral oil. Significant is the very high natural viscosity index of the base used, which ensures limited viscosity decreases as a function of temperatures. Presents: -Exceptional thermal-oxidative resistance in harsh conditions of operation, for much higher durations in constant performance conditions and in the absence of sludge and residues. -Excellent anti-wear, antirust and anticorrosive power. -high viscosity index, for extreme ambient temperatures, caused by very large temperature hikes. -Very low sliding point.

Family: Industrial lubricants
Type: -

It is a totally synthetic lubricant, based on Polyglycols, intended for the lubrication of gears, bearings, supports and kinematisms operating at high temperature, even under heavy loads. The base used and the type of antioxidant, anti-wear, antirust and anticorrosive additives guarantee a long-term thermal-oxidative resistance, in the absence of sludge and residues, at least two and a half times that of a normal mineral oil. Significant is the very high natural viscosity index of the base used, which ensures limited viscosity decreases as a function of temperatures. Presents: -Exceptional thermal-oxidative resistance in harsh conditions of operation, for much higher durations in constant performance conditions and in the absence of sludge and residues. -Excellent anti-wear, antirust and anticorrosive power. -high viscosity index, for extreme ambient temperatures, caused by very large temperature hikes. -Very low sliding point.

Family: Industrial lubricants
Type: -

It is a totally synthetic lubricant, based on Polyglycols, intended for the lubrication of gears, bearings, supports and kinematisms operating at high temperature, even under heavy loads. The base used and the type of antioxidant, anti-wear, antirust and anticorrosive additives guarantee a long-term thermal-oxidative resistance, in the absence of sludge and residues, at least two and a half times that of a normal mineral oil. Significant is the very high natural viscosity index of the base used, which ensures limited viscosity decreases as a function of temperatures. Presents: -Exceptional thermal-oxidative resistance in harsh conditions of operation, for much higher durations in constant performance conditions and in the absence of sludge and residues. -Excellent anti-wear, antirust and anticorrosive power. -high viscosity index, for extreme ambient temperatures, caused by very large temperature hikes. -Very low sliding point.

Family: Industrial lubricants
Type: -

It is a totally synthetic lubricant, based on Polyglycols, intended for the lubrication of gears, bearings, supports and kinematisms operating at high temperature, even under heavy loads. The base used and the type of antioxidant, anti-wear, antirust and anticorrosive additives guarantee a long-term thermal-oxidative resistance, in the absence of sludge and residues, at least two and a half times that of a normal mineral oil. Significant is the very high natural viscosity index of the base used, which ensures limited viscosity decreases as a function of temperatures. Presents: -Exceptional thermal-oxidative resistance in harsh conditions of operation, for much higher durations in constant performance conditions and in the absence of sludge and residues. -Excellent anti-wear, antirust and anticorrosive power. -high viscosity index, for extreme ambient temperatures, caused by very large temperature hikes. -Very low sliding point.

Family: Industrial lubricants
Type: -

It is a totally synthetic lubricant, based on Polyglycols, intended for the lubrication of gears, bearings, supports and kinematisms operating at high temperature, even under heavy loads. The base used and the type of antioxidant, anti-wear, antirust and anticorrosive additives guarantee a long-term thermal-oxidative resistance, in the absence of sludge and residues, at least two and a half times that of a normal mineral oil. Significant is the very high natural viscosity index of the base used, which ensures limited viscosity decreases as a function of temperatures. Presents: -Exceptional thermal-oxidative resistance in harsh conditions of operation, for much higher durations in constant performance conditions and in the absence of sludge and residues. -Excellent anti-wear, antirust and anticorrosive power. -high viscosity index, for extreme ambient temperatures, caused by very large temperature hikes. -Very low sliding point.

Family: Industrial lubricants
Type: -

It is a totally synthetic lubricant, based on Polyglycols, intended for the lubrication of gears, bearings, supports and kinematisms operating at high temperature, even under heavy loads. The base used and the type of antioxidant, anti-wear, antirust and anticorrosive additives guarantee a long-term thermal-oxidative resistance, in the absence of sludge and residues, at least two and a half times that of a normal mineral oil. Significant is the very high natural viscosity index of the base used, which ensures limited viscosity decreases as a function of temperatures. Presents: -Exceptional thermal-oxidative resistance in harsh conditions of operation, for much higher durations in constant performance conditions and in the absence of sludge and residues. -Excellent anti-wear, antirust and anticorrosive power. -high viscosity index, for extreme ambient temperatures, caused by very large temperature hikes. -Very low sliding point.

Family: Industrial lubricants
Type: -

It is a fully synthetic lubricant, based on Polyglycols, intended for the lubrication of gears, bearings, supports and kinematisms operating at high temperature, even under heavy loads. The base used and the type of antioxidant, anti-wear, antirust and anticorrosive additives guarantee a long-term thermal-oxidative resistance, in the absence of sludge and residues, at least two and a half times that of a normal mineral oil. Significant is the very high natural viscosity index of the base used, which ensures limited viscosity decreases as a function of temperatures. Presents: -Exceptional thermal-oxidative resistance in harsh conditions of operation, for much higher durations in constant performance conditions and in the absence of sludge and residues. -Excellent anti-wear, antirust and anticorrosive power. -high viscosity index, for extreme ambient temperatures, caused by very large temperature hikes. -Very low sliding point.

Prodotto ECO
Family: Water-miscible Coolants
Type: Synthetic ester based water-miscible coolant

It is a lubricating oil to be added to the gasoline for the preparation of fuel mixture that also lubricates the engine parts two-stroke. It consists of a mineral base obtained from a narrow cut of distillation and severely refined to solvent with a special and particular "package" of additivation that guarantees: - minimum level of exhaust gas pollution, - excellent lubricating power; - excellent antioxidant, detergent and anti-wear properties engine life and protection. It goes beyond the following specifications: IASO FC TISI API:TC

Family: Automotive
Type: Synthetic-based engine oil

It is a synthetic-based oil particularly formulated to satisfy the critical demands for LEDL (Low Emissions Diesel Lubricant), for SHPDO (Super High Performance diesel Oil) type lubricants. For vehicles equipped with very heavy duty Diesel engines EURO IV - EURO V - EURO VI. It is also suitable for CNG or LPG working engines, exceeding the specifications MB 226.9 and MAN 3271-1. The low ash, phosphorus and sulphur content (Low Saps) make it maxi compatible with post-treatment systems for combustion fumes (DPF: for example particle filters). Features: -excellent detergent, dispersing and anticorrosive properties to prevent the formation of sludge and to neutralize the acidic substances that are formed during combustion; -particularly prolonged draining intervals (see specification MB 228.51); -maximum wear-resistant power for the protection of mechanical parts in motion under stress; -optimal resistance to thermal and oxidative decay, also thanks to the high synthetic base quality; -reduced consumption at minimum values: almost nothing the oil evaporation.

Family: Automotive
Type: Synthetic-based engine oil

It is a totally synthetic oil of type SHPDO (Super High Performance Diesel Oil) specially formulated to meet low emission requirements (LEDL: Low Emission Diesel Lubricant), of equipped vehicles with diesel engines with high power output EURO IV - EURO V - EURO VI exercise also for long distances. It is also suitable for engines running on methane or LPG, exceeding the specification MB 226.9 and MAN 3271-1. The low ash content (LOW SAPS), Phosphorus and Sulfur make it maximally compatible with systems after-treatment of combustion fumes (DPF: for example particulate filters). It guarantees: - Excellent cleaning, dispersing and anti-corrosive properties to prevent the formation of sludge and to neutralize acidic substances that form during the combustion. - Particularly long replacement intervals (see specification MB 228.51). - Very high anti-wear properties for the protection of mechanical parts moving under stress even heavy. - excellent resistance to thermal and oxidative decay, thanks also to the high quality of the synthetic base clerk. - Consumption reduced to minimum values: almost no loss of oil by evaporation.

Prodotto ECO
Family: Industrial lubricants
Type: Synthetic compressors oil

It is a totally synthetic high performance oil, studied to satisfy the most severe lubrication needs of industrial rotating and alternative compressors. It is made of carbon-silicon esters, it doesn’t leave residual and it has long lasting performance. The most important physical properties of this product such as resistance to foam formation, demulsibility and the flash point are properly controlled. Features: - Resistance to foam formation; - No risks while working, increasing safety; - No varnishes or sludge, ensuring that all components such as oil/air separators, intake valves, thermovalves etc. in the rotary compressors machine always work regularly; - Better demulsivity to a quick and complete air separation from water (particularly important in oil flow compressors); - Increasing up to ten times of the substitution intervals, compared to the mineral oils; - Decreasing of oil consumption, thanks to low volatility and excellent lubrication properties; - High efficiency of the rotating compressors, reducing wear and maintenance costs; - Better safety environment, thanks to high flash point and low volatility; - Decreasing of in-use temperature of the compressor, thanks to high thermic conductivity (15% higher compared to a mineral oil).

Family: Industrial lubricants
Type: Synthetic compressors oil

It is a high-performance, non-toxic, fully synthetic oil, specifically designed to meet the most stringent lubrication requirements of industrial rotary and reciprocating compressors. It is made up of a blend of polyalphaolefins and synthetic carboxylic esters, all FDA approved for incidental contact with food, and is formulated to achieve the absence of deposits and a long service life being of the “ash-less” type, without ash. It contains a balanced blend of antioxidant additives that exert a synergistic effect on each other, allowing exceptional thermal-oxidative stability over the long term. The most important physical properties of this product, such as resistance to foam formation, demulsibility and flash point, are carefully controlled. It guarantees: -minimal or no formation of deposits and minimal risk of explosion, for high safety of use; -elimination of varnish and sludge deposits, to ensure that all components such as oil/air separators, intake valves, thermovalves etc. always function properly; -excellent demulsibility, necessary for rapid and complete separation of water in oil flow compressors, where condensate can accumulate in the receptors); -very high drain intervals, up to ten times compared to mineral-based compressor oils; -minimization of oil consumption, thanks to its low volatility and excellent lubricating properties; -high compressor efficiency, for reduced wear and maintenance costs; -excellent safety characteristics thanks to the high flash point and low volatility; -reduction of operating temperature, thanks to the high thermal conductivity, approximately 15% higher than a mineral oil; -very low Pour Point and high Viscosity Index of the synthetic base used, for optimum performance in a very wide operating temperature range.

Family: Industrial lubricants
Type: Synthetic compressors oil

It is a totally synthetic, high-performance oil, non-toxic, specifically designed to meet the strictest lubrication requirements of rotary and reciprocating industrial compressors. It consists of a mixture of polyalphaolefins and synthetic carboxylic esters, all with FDA approval for accidental contact with food, and is formulated to obtain absence of deposits and a long service life; it is, in fact, "ashless" (without ashes). It contains a balanced blend of antioxidant additives that exert a synergistic effect between them, allowing exceptional long-term thermal-oxidative stability. The most important physical properties of this product, such as resistance to foaming, demulsibility and flame point, are carefully controlled. It provides: - minimum or no formation of deposits and minimum risk of explosion, due to a high degree of safety in use; - elimination of varnishes and sludge deposits, to ensure that all components such as oil / air separators, suction valves, thermo-valves etc … always work regularly; - excellent demulsibility, necessary for a rapid and complete water separation (this is particularly important in oil flow compressors, where the condensate can accumulate in the receptors); - very high replacement intervals, up to ten times compared to mineral based compressor oils; - minimization of oil consumption, thanks to its low volatility and excellent lubricating properties; - high efficiency of the compressors, for a reduction in wear and maintenance costs; - excellent safety features thanks to the high flash point and low volatility; -decrease in the operating temperature, thanks to the high thermal conductivity, approximately 15% higher than a mineral oil; - very low Pour Point and high Viscosity Index, typical of the synthetic base used, for optimal performance in a very wide range of operating temperatures.

Prodotto ECO
Family: Industrial lubricants
Type: Synthetic lubricating oil

It is a totally synthetic lubricating oil, free from mineral oil, made from esters with very high thermal-oxidative stability, biodegradable. It is formulated for the lubrication of high performance chains, operating in harsh conditions of operation, both for high temperatures and for the presence of dust. Guarantees: -Excellent antioxidant and protective properties even at high temperatures; -Excellent lubricant and adhesive power, for prolonged protective action of the chains and low consumption; -Non-formation of sludge or carbonisation residues, for a chain always clean and lubricated; -High penetration power and strong anti-wear properties for the protection of the chain links, in particular the most complex ones..

Family: Industrial lubricants
Type: -

It is a synthetic diathermic fluid formulated for heat transmission, composed of a mixture of modified polyalkylene glycol with antioxidant additives, anti-wear and antifoam.

Family: Industrial lubricants
Type: -

It is a lubricating oil for heavily loaded gears, obtained from synthetic hydrocarbon-based oils, with high degree of purity. Features: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a long service life is required; - excellent anti-wear and EP power, especially in comparison with the corresponding gear oils of equal gradation based on mineral oil; - a natural very high Viscosity Index: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a lubricating oil for heavily loaded gears, obtained from synthetic HC base oils of Group III, consisting of hydrocracked hydrocarbons, with anti-wear and E.P. additives of Sulfur-Phosphorus type. It is NSF registered, according to category H-1 (acceptable as a lubricant in the event of accidental contact with food) It provides: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a long service life is required, especially in comparison with the corresponding gear oils of equal gradation based on mineral oil; it prevents the formation of sludge, varnishes, residues, etc. - excellent anti-wear and EP power; - a natural high Viscosity Index: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - strong anti-rust and anti-corrosion power; - perfect compatibility with mineral oils; - excellent compatibility with sealing gaskets.

Family: Industrial lubricants
Type: -

It is a lubricant for heavily-loaded gears, made from Group III HC synthetic base oils, consisting of hydrocracked hydrocarbons and mixed with anti-wear and E.P. sulfur-phosphorus additives. It is NSF approved, under the H-1 category (suitable as a lubricant in case of accidental food contact). It features: -highest resistance to thermal-oxidative decay in the event of heavy-duty conditions because of loads or temperatures or when an extremely long tools lifetime is required, especially in comparison with mineral-based gear lubricants of equal gradation; it prevents the formation of sludge, varnishes, residues, etc -excellent anti-wear and EP power -naturally high viscosity index: greater lubricity at low temperatures and higher viscosity resistance at high temperatures -strong anti-rust and anti-corrosion power -perfect compatibility with mineral oils -excellent compatibility with sealing gaskets

Family: Industrial lubricants
Type: -

It is a lubricating oil for heavily loaded gears, obtained from synthetic HC base oils of Group III, consisting of hydrocracked hydrocarbons, with anti-wear and E.P. additives of Sulfur-Phosphorus type. It is NSF registered, according to category H-1 (acceptable as a lubricant in the event of accidental contact with food). It provides: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a long service life is required, especially in comparison with the corresponding gear oils of equal gradation based on mineral oil; it prevents the formation of sludge, varnishes, residues, etc. - excellent anti-wear and EP power; - a natural high Viscosity Index: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - strong anti-rust and anti-corrosion power; - perfect compatibility with mineral oils; - excellent compatibility with sealing gaskets.

Family: Industrial lubricants
Type: Synthetic lubricating oil

It is a typical lubricant for use in mechanisms that require an ashless ash-free oil suitable for accidental contact with food, with excellent properties of resistance to thermal-oxidative decay. It is obtained from synthetic base oils consisting predominantly of PAO (poly-alpha-olefin), mixed with anti-wear sulfur-phosphorus additives, antioxidants, anti-corrosion and anti-rust agents, which work in synergy. All ingredients have NSF H1 approval. It provides: - exceptional resistance to aging and the formation of sludge and residues, even in the case of severe operating conditions for environmental temperatures or when a very long service life is required, especially in comparison with the corresponding lubricants of the same gradation based on mineral oil ; - high anti-wear power; - a natural, its own, high Viscosity Index: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - strong anti-corrosion and anti-rust power, even in the presence of water-based fluids; - Perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: Synthetic lubricating oil

It is a typical lubricant for use in mechanisms that require an ashless ash-free oil suitable for accidental contact with food, with excellent properties of resistance to thermal-oxidative decay. It is obtained from synthetic base oils consisting predominantly of PAO (poly-alpha-olefin), mixed with anti-wear sulfur-phosphorus additives, antioxidants, anti-corrosion and anti-rust agents, which work in synergy. All ingredients have NSF H1 approval. It provides: - exceptional resistance to aging and the formation of sludge and residues, even in the case of severe operating conditions for environmental temperatures or when a very long service life is required, especially in comparison with the corresponding lubricants of the same gradation based on mineral oil ; - high anti-wear power; - a natural, its own, high Viscosity Index: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - strong anti-corrosion and anti-rust power, even in the presence of water-based fluids; - Perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic base oils mainly consisting of poly-alpha-olefins and characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the points of contact of gear teeth; this property is given by special additives, based on Sulfur and Phosphorus in synergistic relationship, which create a particularly tenacious and resistant protective molecular patina on the metal surface. It provides: - exceptional and maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially compared to the corresponding gear oils of equal grading based on mineral oil: it prevents the formation of sludge, lacquers, residues, etc. - very high anti-wear and EP power; - a very high natural viscosity index of its own: this means greater fluidity at cold and higher viscosity strength at high temperatures; - maximum smoothness at the lowest ambient temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: Synthetic lubricating oil

It is a typical lubricant for use in mechanisms that require an ashless ash-free oil suitable for accidental contact with food, with excellent properties of resistance to thermal-oxidative decay. It is obtained from synthetic base oils consisting predominantly of PAO (poly-alpha-olefin), mixed with anti-wear sulfur-phosphorus additives, antioxidants, anti-corrosion and anti-rust agents, which work in synergy. All ingredients have NSF H1 approval. It provides: - exceptional resistance to aging and the formation of sludge and residues, even in the case of severe operating conditions for environmental temperatures or when a very long service life is required, especially in comparison with the corresponding lubricants of the same gradation based on mineral oil ; - high anti-wear power; - a natural, its own, high Viscosity Index: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - strong anti-corrosion and anti-rust power, even in the presence of water-based fluids; - Perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic base oils mainly consisting of poly-alpha-olefins and characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the points of contact of gear teeth; this property is given by special additives, based on Sulfur and Phosphorus in synergistic relationship, which create a particularly tenacious and resistant protective molecular patina on the metal surface. It provides: - exceptional and maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially compared to the corresponding gear oils of equal grading based on mineral oil: it prevents the formation of sludge, lacquers, residues, etc. - very high anti-wear and EP power; - a very high natural viscosity index of its own: this means greater fluidity at cold and higher viscosity strength at high temperatures; - maximum smoothness at the lowest ambient temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic base oils mainly consisting of poly-alpha-olefins and characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the points of contact of gear teeth; this property is given by special additives, based on Sulfur and Phosphorus in synergistic relationship, which create a particularly tenacious and resistant protective molecular patina on the metal surface. It provides: - exceptional and maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially compared to the corresponding gear oils of equal grading based on mineral oil: it prevents the formation of sludge, lacquers, residues, etc. - very high anti-wear and EP power; - a very high natural viscosity index of its own: this means greater fluidity at cold and higher viscosity strength at high temperatures; - maximum smoothness at the lowest ambient temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic base oils mainly consisting of poly-alpha-olefins and characterized by a high resistance to "Extreme Pressures" (high specific pressures), which occur at the points of contact of gear teeth; this property is given by special additives, based on Sulfur and Phosphorus in synergistic relationship, which create a particularly tenacious and resistant protective molecular patina on the metal surface. It provides: - exceptional and maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially compared to the corresponding gear oils of equal grading based on mineral oil: it prevents the formation of sludge, lacquers, residues, etc. - very high anti-wear and EP power; - a very high natural viscosity index of its own: this means greater fluidity at cold and higher viscosity strength at high temperatures; - maximum smoothness at the lowest ambient temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for highly charged gears, obtained from hydrocarbon synthetic base oils, with anti-wear additives and E.P. sulfur-phosphorus type. Guarantees: -maximum resistance to thermal-oxidative decay in case of severe operating conditions for loads and temperature, or when a long service life is required, especially compared to the corresponding lubricants for gears of equal gradation based on mineral oil; It prevents the formation of morchie, lacquers, residues, etc. -excellent anti-wear and EP power; -a natural high viscosity index its own: this means greater smoothness to cold and higher tightness of the viscosity at high temperatures; -perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for highly charged gears, obtained from hydrocarbon synthetic base oils, with anti-wear additives and E.P. Sulfur-phosphorus type. Guarantees: -maximum resistance to thermal-oxidative decay in case of severe operating conditions for loads and temperature, or when a long service life is required, especially compared to the corresponding lubricants for Gears of equal gradation based on mineral oil; It prevents the formation of morchie, lacquers, residues, etc. -excellent anti-wear and EP power; -a Natural High viscosity index its own: this means greater smoothness to cold and higher tightness of the viscosity at high temperatures; -perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic hydrocarbon base oils, with anti-wear additives and E.P. Sulfur-Phosphorus type. It provides: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially in comparison with the corresponding gear oils of equal grading based on mineral oil; it prevents the formation of sludge, lacquers, residues, etc. - excellent anti-wear and EP power; - a natural high Viscosity Index of its own: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic hydrocarbon base oils, with anti-wear additives and E.P. Sulfur-Phosphorus type. It provides: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially in comparison with the corresponding gear oils of equal grading based on mineral oil; it prevents the formation of sludge, lacquers, residues, etc. - excellent anti-wear and EP power; - a natural high Viscosity Index of its own: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic hydrocarbon base oils, with anti-wear additives and E.P. Sulfur-Phosphorus type. It provides: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially in comparison with the corresponding gear oils of equal grading based on mineral oil; it prevents the formation of sludge, lacquers, residues, etc. - excellent anti-wear and EP power; - a natural high Viscosity Index of its own: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic hydrocarbon base oils, with anti-wear additives and E.P. Sulfur-Phosphorus type. It provides: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially in comparison with the corresponding gear oils of equal grading based on mineral oil; it prevents the formation of sludge, lacquers, residues, etc. - excellent anti-wear and EP power; - a natural high Viscosity Index of its own: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic hydrocarbon base oils, with anti-wear additives and E.P. Sulfur-Phosphorus type. It provides: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially in comparison with the corresponding gear oils of equal grading based on mineral oil; it prevents the formation of sludge, lacquers, residues, etc. - excellent anti-wear and EP power; - a natural high Viscosity Index of its own: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic hydrocarbon base oils, with anti-wear additives and E.P. Sulfur-Phosphorus type. It provides: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially in comparison with the corresponding gear oils of equal grading based on mineral oil; it prevents the formation of sludge, lacquers, residues, etc. - excellent anti-wear and EP power; - a natural high Viscosity Index of its own: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - perfect compatibility with mineral oils.

Family: Industrial lubricants
Type: -

It is a typical lubricating oil for heavily loaded gears, obtained from synthetic hydrocarbon base oils, with anti-wear additives and E.P. Sulfur-Phosphorus type. It provides: - maximum resistance to thermal-oxidative decay in the event of severe operating conditions for loads and temperatures or when a very long service life is required, especially in comparison with the corresponding gear oils of equal grading based on mineral oil; it prevents the formation of sludge, lacquers, residues, etc. - excellent anti-wear and EP power; - a natural high Viscosity Index of its own: this means greater smoothness when cold and higher viscosity resistance at high temperatures; - perfect compatibility with mineral oils.

Family: Neat cutting oils
Type: Synthetic-based neat cutting lubricant

It is a neat oil for grinding and lapping, with low viscosity, but characterized by a reduced tendency to the formation of fumes and mists. It is in fact formulated with the latest generation of raw materials, consisting of highly refined hydrocarbons with additives to optimize cleaning and cutting performance. Hygienic-sanitary and environmental compatibility is very high. It provides: -high resistance to oxidation and aging; -a high Viscosity Index; - excellent decantation of the waste; - very low odor; - an excellent lubrication power and an exceptional stability to shear stresses; -excellent corrosion protection and high air release capacity.

Family: Neat cutting oils
Type: Synthetic-based neat cutting lubricant

It is a neat oil with low viscosity, used for grinding and sharpening, characterized by a reduced tendency to the formation of fumes and mists. It is formulated with the latest generation of raw materials, consisting of synthetic hydrocarbons with additives to optimize the performance of detergents and cutting. This product guarantees a really high Hygienic-sanitary and environmental compatibility. It features: -high resistance to oxidation and aging; -a high viscosity index; -excellent decantation of the scrap; -very low odor; -excellent lubrication power and exceptional stability to the shear stress; -excellent corrosion protection and high air release capability.

Family: Neat cutting oils
Type: Neat cutting mineral oil

It is a clear neat coolant, for heavy-duty processes, of low viscosity and free from chlorine, consisting of extremely greasy and complex substances mixed with active/inactive sulphur-based extreme pressure additives. Its cooling power results particularly effective given the fluidity of the product, while the lubricant and anti-welding power and the load resistance is supported by a large presence of additives, which operate synergically in combination with each other in a wide range of temperatures. The fluid is obtained from a severely hydrogenated and high-quality mineral base with great hygienic-sanitary tolerability for the operators; it is free from odour and with a particularly narrow distillation interval, to minimize the formation of fumes and mists. The product is not irritating and features a very moderate and not unpleasant odour. It can be easily removed with any petroleum solvent or with alkaline washing. It is protected against oxidation thanks to an additivation system that guarantees long operations and contains metal deactivators for any ferrous material.

Family: Water-miscible Coolants
Type: Synthetic water-miscible coolant

TECNO MQL W 2958 is an aqueous solution of stabilized alkylene glycols, non-toxic, mineral oil free and totally free of hazardous substances. It is a fluid specifically formulated for cutting aluminum alloy bars, which, still incandescent, come out from the extrusion. Applied by spray, it guarantees: - cooling, lubrication and cleaning of the cutting blade, avoiding the formation of fill material; - no burrs on the bars; - absence of residues, sludge and scale; - protection of the material from oxidation; - absence of dangerous fumes; - maximum hygienic-sanitary and environmental compatibility.

Family: Special products
Type: Special product

It is a lubricating mineral oil with a high degree of purity, consisting of a mixture of highly selected paraffinic mineral oil and of severely hydrotreated naphthenic mineral oil, which is applied as a base oil for chemical-physical laboratory tests and for testing of technical equipment.

Family: Industrial lubricants
Type: Textile Lubricant

It is a colourless white oil with a high degree of purity, obtained from a hydrocarbon synthetic base with NSF food approval, free of aromatic hydrocarbons and sulphur compounds, of "ashless" type (without ashes) for the lubrication of mechanisms very low degree of tolerance, specific for the textile industry. Is characterisedy: -good anti-wear power, for the protection of kinematisms and movement Organs. -white colour, to avoid staining of the processed material and easy washability, in order to facilitate an easy removal. -excellent thermal-oxidative resistance, to prevent the formation of morills, lacquers and residues. -corrosion protection induced by the presence moisture. -good untuding power, which assures the presence of a protective lubricant veil on the metallic surfaces.

Family: Industrial lubricants
Type: Textile Lubricant

It’s a colorless white oil with a very high degree of purity, obtained from a synthetic hydrocarbon base with NSF food approval, free of aromatic hydrocarbons and sulfur compounds, ashless, used for the lubrication of mechanisms with a very low degree of tolerance, specific for the textile industry. It is characterized by: - Good anti-wear power, for the protection of kinematics and movement organs. - White color, to avoid staining of the processed material and high washability, to facilitate an easy removal. - High thermal-oxidative resistance, to prevent the formation of sludge, lacquers and residues. - Protection against corrosion induced by the presence of moisture. - Good greasy power, which ensures the presence of a protective lubricating film on metal surfaces.

Family: Automotive
Type: Mineral based engine oil

It is an engine oil obtained from particularly selected and refined mineral bases, formulated to satisfy all the most critical and advanced current European demands, with respect to the XHPDO (Extra High Performance Diesel Oil) lubricants, for Vehicles equipped with Diesel engines with high power supply. It is characterised by exceptional cleansing, dispersing and anticorrosive properties to prevent the formation of sludge and to neutralize the acidic substances that are formed during combustion. Guarantees: -particularly Prolonged replacement Intervals. -maximum Wear-resistant power for the protection of mechanical parts in motion under Stress. -excellent resistance to thermal and oxidative decay of the oil used, with synthetic base. -reduced consumption at minimum values: almost nothing the loss of evaporation Oil.

Family: Automotive
Type: Synthetic-based engine oil

It’s a totally synthetic based lubricating oil, low sulphated ash (Low Sulfated Ash) content of Phosphorus and sulphur, type HDEO (Heavy Duty Diesel Engine Oil) of the highest quality, especially formulated to meet all the most critical and advanced required for the highest range diesel engines, operating in the strictest operating conditions: minimum consumption (Fuel Economy), maximum engine protection against wear, for increased distances (or hours of operation), oxidation resistance, for very long life service at constant performance. Meet and exceed all the specific currents of all the heavy duty vehicle and diesel engine manufacturers high power output and the latest expected EU emission standards: EURO VI (for transport heavy duty) and EU Stage IV (for off-duty machines road). It is also a lubricant strongly recommended for EGR diesel engines equipped with "post-treatment" systems (such as particle filters) and systems SCR for the reduction of Nox (oxides of Nitrogen). It is also suitable for engines running on methane or LPG, exceeding the specification MB 228.51, within which tests on gas-driven engines are planned. Presents: - Exceptional cleaning, dispersing and anti-corrosive properties to prevent the formation of sludge and to neutralize the acidic substances that are formed during the combustion. - Maximum wear resistance for parts protection Mechanics moving under stress. - Excellent resistance to thermal and oxidative decay of the synthetic fluid used as the basis. Reduced consumption at minimum values; almost no oil loss by evaporation. - Particularly long replacement intervals (see specification MB 228.51).

Family: Industrial lubricants
Type: -

It is a diathermic mineral oil, that is formulated for the transmission of heat, obtained from special paraffin bases, highly selected, treated in a specific way to ensure the necessary properties of resistance to oxidation and cracking and with a restricted distillation interval to limit the presence of volatile fractions. Has the following characteristics: -high chemical stability, resistance to oxidation; -high Thermal stability, resistance to "thermal cracking"; -high flash point and low vapour pressure, to reduce evaporation and cavitation phenomena; -low viscosity, for easier cold start-ups and reduction of energy consumption; -total Chemical inertia; -moderate to low and high temperature odour-

Family: Industrial lubricants
Type: -

It is a diathermic mineral oil, that is formulated for the transmission of heat, obtained from special paraffin bases, highly selected, treated in a specific way to ensure the necessary properties of resistance to oxidation and cracking and with a restricted distillation interval to limit the presence of volatile fractions. Has the following characteristics: -high chemical stability, resistance to oxidation; -high Thermal stability, resistance to “thermal cracking”; -high flash point and low vapour pressure, to reduce evaporation and cavitation phenomena; -low viscosity, for easier cold start-ups and reduction of energy consumption; -total Chemical inertia; -moderate to low and high temperature odour

Family: Industrial lubricants
Type: -

It is a diathermic mineral oil, that is formulated for the transmission of heat, obtained from special paraffin bases, highly selected, treated in a specific way to ensure the necessary properties of resistance to oxidation and cracking and with a restricted distillation interval to limit the presence of volatile fractions. Has the following characteristics: -high chemical stability, resistance to oxidation; -high Thermal stability, resistance to “thermal cracking”; -high flash point and low vapour pressure, to reduce evaporation and cavitation phenomena; -low viscosity, for easier cold start-ups and reduction of energy consumption; -total Chemical inertia; -moderate to low and high temperature odour

Family: Industrial lubricants
Type: -

It is a diathermic mineral oil, that is formulated for the transmission of heat, obtained from special paraffin bases, highly selected, treated in a specific way to ensure the necessary properties of resistance to oxidation and cracking and with a restricted distillation interval to limit the presence of volatile fractions. It belongs to the special series "NS", of brown colour, formulated with a particular additivation that exalts even more the properties of: -thermal and oxidative stability, especially in systems subjected to harsh conditions of operation (dusty environment, presence of strong humidity, possibility of thermal shocks, etc.); -dispersiveness of any residues in the fluid mass, to avoid the formation of sludge and incrustations; -heat transmission, keeping the value of the heat exchange coefficient and thermal conductivity constant for longer in time. It also has the following characteristics: -high flash point and low vapour pressure, to reduce evaporation and cavitation phenomena; -low viscosity, for easier cold start-ups and reduction of energy consumption; -total chemical inertia; -moderate to low and high temperature odour.

Family: Industrial lubricants
Type: -

It is a diathermic mineral oil, that is formulated for the transmission of heat, obtained from special paraffin bases, highly selected, treated in a specific way to ensure the necessary properties of resistance to oxidation and cracking and with a restricted distillation interval to limit the presence of volatile fractions. It belongs to the special series "NS", of brown colour, formulated with a particular additivation that exalts even more the properties of: -thermal and oxidative stability, especially in plants subjected to harsh conditions of operation (dusty environment, presence of strong humidity, possibility of thermal shocks, etc.); -dispersiveness of any residues in the fluid mass, to avoid the formation of sludge and incrustations; -heat transmission, Keeping the value of the heat exchange coefficient and thermal conductivity constant for longer in time. It also has the following characteristics: -high flash point and low vapour pressure, to reduce evaporation and cavitation phenomena; -low viscosity, for easier cold start-ups and reduction of energy consumption; -total chemical inertia; -moderate to low and high temperature odour.

Family: Industrial lubricants
Type: -

It is a diathermic mineral oil, that is formulated for the transmission of heat, obtained from special paraffin bases, highly selected, treated in a specific way to ensure the necessary properties of resistance to oxidation and cracking and with a restricted distillation interval to limit the presence of volatile fractions. It belongs to the special series “NS”, of brown colour, formulated with a particular additivation that exalts even more the properties of: -thermal and oxidative stability, especially in plants subjected to harsh conditions of operation (dusty environment, presence of strong humidity, possibility of thermal shocks, etc.); -dispersiveness of any residues in the fluid mass, to avoid the formation of sludge and incrustations; -heat transmission, Keeping the value of the heat exchange coefficient and thermal conductivity constant for longer in time. It also has the following characteristics: -high flash point and low vapour pressure, to reduce evaporation and cavitation phenomena; -low viscosity, for easier cold start-ups and reduction of energy consumption; -total chemical inertia; -moderate to low and high temperature odour."

Family: Industrial lubricants
Type: -

It is a diathermic mineral oil, that is formulated for the transmission of heat, obtained from special paraffin bases, highly selected, treated in a specific way to ensure the necessary properties of resistance to oxidation and cracking and with a restricted distillation interval to limit the presence of volatile fractions. It belongs to the special series “NS”, of brown colour, formulated with a particular additivation that exalts even more the properties of: -thermal and oxidative stability, especially in plants subjected to harsh conditions of operation (dusty environment, presence of strong humidity, possibility of thermal shocks, etc.); -dispersiveness of any residues in the fluid mass, to avoid the formation of sludge and incrustations; -heat transmission, Keeping the value of the heat exchange coefficient and thermal conductivity constant for longer in time. It also has the following characteristics: -high flash point and low vapour pressure, to reduce evaporation and cavitation phenomena; -low viscosity, for easier cold start-ups and reduction of energy consumption; -total chemical inertia; -moderate to low and high temperature odour.

Family: Industrial lubricants
Type: -

It is a diathermic mineral oil, that is formulated for the transmission of heat, obtained from special paraffin bases, highly selected, treated in a specific way to ensure the necessary properties of resistance to oxidation and cracking and with a restricted distillation interval to limit the presence of volatile fractions. It belongs to the series Speciabrown colour, formulated with a particular additivation that exalts even more the properties of: -thermal and oxidative stability, especially in plants subjected to gravosei exercise conditions (dusty environment, presence of strong humidity, possibility of thermal shoks, etc.); -dispersiveness of any residues in the fluid mass, to avoid the formation of sludge encrustation; -hea Keeping the value of heat exchange coefficient and thermal conductivity constant for longer in Time. It also has the following characteristics: -high flash point and low vapour pressure; -high viscosity index; -total Chemical Inertia.

Family: Industrial lubricants
Type: -

It is a heat transfer fluid obtained from highly selected synthetic hydrocarbon bases, specifically treated in order to ensure the necessary properties of resistance to oxidation or cracking and with a restricted distillation range to limit the presence of volatile fractions. It belongs to the special series “NS” characterized by a particoular additivation which enhances even more the following properties: - thermal and oxidative stability, mainly in facilities subjected to heavy operating conditions (dusty environment, high humidity, possibility of thermal shocks); - dispersion of any residuals in the fluid mass to avoid the formation of sludge and residues; - heat transimission, keeping the value of the heat transfer coefficient and thermal conductivity constant for longer. It features the following characteristics: - High flash point and low vapour pressure to reduce evaporation and cavitation phenomena; - low viscosity for easier cold startings and lower energy consumption; - total chemical inertia; - Moderate odour at low and high temperatures.

Family: Industrial lubricants
Type: Stationary gas engines oil

It is a highly innovative lubricating oil for stationary engines, with a low concentration of ashes, of unigrade type, of high performance, formulated from high-tech mineral-based oils and an advanced balanced system of additives. It is particularly designed for new engines operating on landfill gas (LFG: landfill gas) and biogas (from digesters). Features: - the ability to effectively limit the fall of the Basic Number (T.B.N.) and of i-pH levels, in particular where landfill gas is used, to neutralize the acids present; - an excellent and superior resistance to oxidation and nitration and to thermal-oxidative decay; - an exceptional anti-wear and detergent power of the engine and in particular of the cylinders, the pistons, the elastic bands of the valves and the spark plugs; - a low level of Phosphorus, for a long life of the catalytic muffler; - prolonged replacement intervals, compared to other oils; - a minimum consumption of oil. Thanks to the high guaranteed performance level of THG OILEXTRA SAE 40, the engine lasts longer.

Family: Automotive
Type: Mineral based engine oil

It is a lubricating oil for both petrol and Diesel engines of cars and light trucks, multigrade, with synthetic base, suitable for any climate and season. For its characteristics, it is particularly suitable for ""Turbo"" engines (both gasoline and Diesel). Guarantees: -Easy starting and cold and a rapid lubrication of the engine at start-up (sensible reduction of the so-called ""adhesive wear"" that represents 70% approx. Of the total motor wear); -Excellent heat protection; -Excellent detergent power, for the cleaning of the engine and absence of sludge and residues; -Reduction of lubricant consumption at minimum levels (the long-term experience of product use has shown that the need for topping up is considerably reduced compared to what is normally required); -Prolonged replacement distances.

Family: Automotive
Type: Mineral based engine oil

It is a high quality lubricating mineral oil suitable for high performance motors. Particularly versatile, it can be used both for passenger cars and for light commercial vehicles. Ensures: -maximum resistance to Decaforthermic-oxidativ -SAE 15w-40 gradation Range optimum for easy cold starts and for perfect sealing on the compression rings. -strong detergents, dispersants, Anticorrosiveand wear-resistant properties. -exceptional Lubricant Power on Bearings. -reduced consumption to minimum values: almost nothing the loss of Olioper Evaporation. -high level of heat removal to keep engine parts at optimum operating Temperatures.

Family: Automotive
Type: Synthetic-based engine oil

It is a multigrade lubricant, designed for both petrol and diesel engines of cars and made from a mixture of polyalphaolefin of totally synthetic esters and high-performance additives to improve its performance. It guarantees: - Easier cold startings and quicker engine lubrication at start-up - Excellent shear stability - Presence of additives which guarantee the engine cleanliness and maximum protection from excessive wear even for the most complex racing applications - Excellent engine detergency - It provides highest level of acceleration and power

Family: Automotive
Type: Synthetic-based engine oil

It is a lubricating oil for 4-stroke engines of high-range, entirely synthetic, "fuel efficient" type, for reduced fuel consumption, with exceptional performance, at the highest viscosity index, suitable for any climate and season, obtained with exclusive additives that give to the product superior detergents, dispersants, antioxidants, anticorrosive, anti-wear and antifoam properties. Guarantees: -much easier to start cold, even in the presence of extremely rigid climates, with a quicker, almost immediate, lubrication of the engine and therefore a significant reduction of the so-called "adhesive wear", which represents about 70% of the wear overall engine; -excellent heat protection, since it maintains the lubricant veil intact, even at the highest operating temperatures; -exceptional Motor detergence and thermal-oxidative resistance, against the formation of sludge, lacquers and residues even in the most extreme conditions of operation for temperature, load under stress, "stop and go" regime; -minimum evaporation loss, with almost zero topping-ups; -very Prolonged replacement intervals; -a decidedly superior wear protection of all the engine's stressed elements (shafts, cams, bums, piston rings, valves, rods, pistons, etc.) for a very long life of the engine in efficiency conditions; -compatibility and complete miscibility with mineral-based Motoei oils.

Family: Automotive
Type: Synthetic-based engine oil

It is a lubricating oil for 4-stroke engines of high-range, entirely synthetic, "fuel Efficient" type, for reduced fuel consumption, with exceptional performance, at the highest viscosity index, suitable for any climate and season, obtained with exclusive additives that give to the product superior detergents, dispersants, antioxidants, anticorrosive, anti-wear and Antifoam Properties. Guarantees: -much easier to start cold, even in the presence of extremely rigid climates, with a quicker, almost immediate, lubrication of the engine and therefore a significant reduction of the so-called "adhesive wear", which represents about 70% of the wear Overall engine; -excellent Heat protection, since it maintains the lubricant veil intact, even at the highest operating temperatures; -exceptional Motor detergence and thermal-oxidative resistance, against the formation of sludge, lacquers and residues even in the most extreme conditions of operation for temperature, load under stress, "stop and go" regime; -minimum evaporation loss, with almost zero topping-ups; -very Prolonged replacement intervals; -a decidedly superior wear protection of all the Engine's stressed elements (shafts, cams, bums, piston rings, valves, rods, pistons, etc.) for a very long life of the engine in efficiency conditions; -compatibility and complete miscibility with mineral-based Motoei oils.

Family: Automotive
Type: Synthetic-based engine oil

It is a lubricating oil for turbocharged engines both gasoline and Diesel of cars and light trucks, entirely synthetic, of type "fuel Efficient", for reduced fuel consumption, with exceptional performance, at the highest viscosity index, suitable for any climate and season, obtained with exclusive additives that give to the product superior detergents, dispersants, antioxidants, anticorrosive, anti-wear and Antifoam Properties. Guarantees: -much easier to start cold, even in the presence of extremely rigid climates, with a quicker, almost immediate, lubrication of the engine and therefore a significant reduction of the so-called "adhesive wear", which represents about 70% of the wear Overall engine; -excellent Heat protection, since it maintains the lubricant veil intact, even at the highest operating temperatures; -exceptional Motor detergence and thermal-oxidative resistance, against the formation of sludge, lacquers and residues even in the most extreme conditions of operation for temperature, load under stress, "stop and go" regime; -minimum evaporation loss, with almost zero topping-ups; -very Prolonged replacement intervals; -a decidedly superior wear protection of all the Engine's stressed elements (shafts, cams, bums, piston rings, valves, rods, pistons, etc.) for a very long life of the engine in efficiency conditions; -compatibility and complete miscibility with mineral-based motor oils.

Family: Automotive
Type: Synthetic-based engine oil

It is a lubricating oil for turbo engines both gasoline and Diesel of cars and light trucks, entirely synthetic, of type "fuel Efficient", for reduced fuel consumption, with exceptional performance, at the highest viscosity index, suitable for any Climate and season, obtained with exclusive additives that give to the product superior detergents, dispersants, antioxidants, anticorrosive, anti-wear and Antifoam Properties. Guarantees: -much easier to start cold, even in the presence of extremely rigid climates, with a quicker, almost immediate, lubrication of the engine and therefore a significant reduction of the so-called "adhesive wear", which represents about 70% of the wear Overall engine; -excellent Heat protection, since it maintains the lubricant veil intact, even at the highest operating temperatures; -exceptional Motor detergence and thermal-oxidative resistance, against the formation of sludge, lacquers and residues even in the most extreme conditions of operation for temperature, load under stress, "stop and go" regime; -minimum evaporation loss, with almost zero topping-ups; -very Prolonged replacement intervals; -a decidedly superior wear protection of all the Engine's stressed elements (shafts, cams, bums, piston rings, valves, rods, pistons, etc.) for a very long life of the engine in efficiency conditions; -compatibility and complete miscibility with mineral-based motor oils.

Family: Automotive
Type: Synthetic-based engine oil

It is a lubricating oil for turbo engines both gasoline and Diesel of cars and light trucks, entirely synthetic, of type "fuel Efficient", for reduced fuel consumption, with exceptional performance, at the highest viscosity index, suitable for any climate and season, obtained with exclusive additives that give to the product superior detergents, dispersants, antioxidants, anticorrosive, anti-wear and Antifoam Properties. Guarantees: -much easier to start cold, even in the presence of extremely rigid climates, with a quicker, almost immediate, lubrication of the engine and therefore a significant reduction of the so-called "adhesive wear", which represents about 70% of the wear Overall engine; -excellent Heat protection, since it maintains the lubricant veil intact, even at the highest operating temperatures; -exceptional Motor detergence and thermal-oxidative resistance, against the formation of sludge, lacquers and residues even in the most extreme conditions of operation for temperature, load under stress, "stop and go" regime; -minimum evaporation loss, with almost zero topping-ups; -very Prolonged replacement intervals; -a decidedly superior wear protection of all the Engine's stressed elements (shafts, cams, bums, piston rings, valves, rods, pistons, etc.) for a very long life of the engine in efficiency conditions; -compatibility and complete miscibility with mineral-based motor oils.

Family: Automotive
Type: Synthetic-based engine oil

It is a lubricating oil for both gasoline and Diesel engines of cars and light trucks, multigrade, totally synthetic based, suitable for any climate and Season. Due to its characteristics, it is particularly suitable for "turbocharged" engines (both gasoline and Diesel). It is classified as "fuel efficient" oil, for reduced fuel consumption. Guarantees: -easier cold starts and faster lubrication of the engine at start-up (sensible reduction of the so-called "adhesive wear", which represents 70% approx. Of total engine wear); -exceptional Heat protection; -maximum Detergence of the motor; -reduction of lubricant consumption at minimum levels (the long-term experience of product use has shown that the need for topping up is considerably reduced compared to what is normally permissible); -maximum Replacement Distances.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is a viscous fluid consisting of a mixture of chlorinated compounds and antioxidant, untuosant and anticorrosive additives. These components allow to carry out extremely heavy mechanical deformation machining, in particular of stainless steels and of hard and extra-hard alloy steels. Presents: -Very light color; -Low odor; -Very high hygienic-sanitary compatibility; -Non-flammability; -Solubility in common degreasing solvents; -No staining of yellow alloys. Guarantees: -An excellent surface finish of high quality level even for pieces of complex geometry; -A high life of the moulds; -Maximum smoothness of the surfaces during the deformation phase.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a newly formulated high quality water-miscible semi-synthetic coolant for cutting and grinding processes. For this product, it has been adopted an innovative, advanced and exclusive bio-stabilization system which makes the product, at the recommended concentrations of use, highly resistant to microbiological attacks. It is free of chlorine, boric compounds, formaldehyde donors, biocides, secondary amines and their derivatives. It features: -High degree of tolerability for the operators -High stability of the emulsions, thanks to an innovative and exclusive formulation system -Excellent level of surface finishing of the machined pieces and tools lifetime; good cutting power at recommended usage concentrations -Reduction of fumes during the processes -Excellent anti-rust and anti-corrosion protection -Excellent lubrication of rails and sliding parts of the machine tools and good cleaning power -Good miscibility and stability even with hard waters -Excellent resistance to foam formations, at normal concentrations of use, even with fresh waters. The fresh emulsion is clear, translucent, opalescent and tends to concentrate with use, assuming a milky appearance. The mineral oil content is approximately 10%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a high-quality semi-synthetic coolant for cutting and grinding processes. The formulation of this product has been obtained through an exclusive combination of innovative compounds with high tolerability, in order to give the product exceptional stability against bacterial and fungal attacks and superior and constant efficiency on the performances. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It therefore guarantees: -high degree of tolerability for the operators and an excellent resistance to bacterial and fungal attacks -high level of surface finishing on the machined parts and great lifetime of the tools even at low concentrations and good cutting power -reduction of fumes in production -very effective antirust protection -excellent lubricating power of the rails and the machine tools sliding parts -perfect miscibility and stability even with hard water -excellent resistance to the formation of foam, at normal concentrations of use, even with extremely sweet waters. The fresh emulsion appears clear, translucent, opalescent and tends to concentrate with use. The mineral and synthetic oil content is approx. 25%.

Prodotto ECO
Family: Industrial lubricants
Type: Semisynthetic water-miscible coolant

It is a high-quality and newly formulated semi-synthetic coolant to be used for cutting and grinding processes. Thanks to a new, advanced and exclusive bio-stabilization system with the usage of substances with low or null hygenic-sanitary impact, the product is free from bactericides and, at the recommended usage concentrations, results higly resistant to microbiological attacks and NON DANGEROUS for the operators. It is free from bactericides, chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It guarantees: - High degree of tolerability for the operators - High stability due to the product’s strong resistance to bacterial and fungal attacks. - High level of surface finishing of the machined pieces and lifetime of the tools even at low concentrations; good cutting power - Reduction of fumes during the processes - Very effective anti-rust protection - Great lubrication of the machine tools rails and sliding parts - Perfect miscibility and stability even with hard waters - Great resistance to foam formation at normal usage concentrations even with extremely fresh waters. The fresh emulsion appears clear, translucent, opalescent and tends to concentrate with use. The mineral oil content is approximately 20%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a high-quality semi-synthetic water-miscible coolant for grinding and cutting operations. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It features: - high tolerability for the operators - high stability of the emulsions, due to the high resistance to bacterial and fungal attacks - excellent surface finishings of the processed pieces - excellent tools lifetime, even at low concentrations - very good cutting power - reduction of fumes during the processes - very good anti-rust power - excellent lubrication of the rails and of the machine tools sliding parts - perfect miscibility and stability, even with hard waters - excellent resistance to foaming, at normal concentration levels and even with particularly fresh waters The emulsion appears clear, translucent, milky-white and tends to concentrate with use. Mineral oil content is approximately 20%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a newly formulated high-quality semi-synthetic coolant to be used for cutting and grinding processes. Particularly, a new, advanced and exclusive biostabilization system has been adopted in order to make the product, under the recommended concentrations of use, exceptionally resistant to the microbiological attack. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It guarantees: - High level tolerability for the operators - Excellent stability of the emulsions thanks to an innovative and exclusive bio-stabilization system which makes the product resistant to bacterial and fungal attacks - High level of surface finishing of the machined pieces and greater lifetime of the tools even at low concentrations. Good cutting power -Reduction of fumes during the processes -Excellent anti-rust protection - Exceptional lubrication of the slidi parts of the machine tools - Perfect miscibility and stabil even with hard waters - Great resistance to foam formation at regular concentrations of use even with particularly fresh waters The fresh emulsion appears clear, translucent, opaline and concentrates during use. Mineral oil content is about 15%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a newly formulated high-quality semi-synthetic coolant for cutting and grinding processes. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It guarantees: -High degree of tolerability for the operators -Great stability of the emulsions -High level of surface finishing of the machined pieces and lifetime of the tools, even at low concentrations; good cutting power -Reduction of fumes during the processes -Great anti-rust protection -Great lubricity of the rails and sliding parts of the machine tools -Perfect miscibility and stability of the emulsions even with hard waters -Great resistance to foam formation, at normal concentrations of use, even with particularly fresh waters The fresh emulsion appears clear, translucent, opalescent and tends to concentrate with use. The mineral oil content is approximately 20%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a newly formulated high-quality semi-synthetic water-miscible coolant for chip removal and cutting processes. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It features: -high degree of tolerability for the operators -high stability of the emulsions, due to its high resistance to bacterial and fungal attacks -excellent surface finishings of the machined pieces -excellent tools lifetime, even at low concentrations -good cutting property -reduction of fumes during the processes -very good and long-lasting anti-rust property -excellent lubrication of the rails and of the machine tools sliding parts -perfect miscibility and stability, even with hard waters -excellent resistance to foam, at normal levels of concentration and even with extremely frehs waters The emulsion appears clear, translucent, opalescent and tends to concentrate with use. Mineral oil content is approximately 20%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a very high quality, emulsifiable, cutting and grinding lubricant, of new formulation, prepared according to the most recent acquisitions of modern technology to satisfy the most advanced requests of the workshops for mechanical processing. In particular, an innovative, advanced and exclusive bio-stabilization system has been adopted, which makes TORMA 4 FB XT, at the recommended concentrations of use, highly resistant to microbiological attack. It is expressly formulated for the processing of all aluminum alloys, all steels, including stainless steel, and all ferrous materials. It is totally free from: -bactericides of any nature; -formaldehyde and formaldehyde donors in particular; -Boron and boric compounds; - Chlorine and derivatives; -secondary amines and their derivatives. It ensures: - a very high degree of tolerability for operators thanks to the absence of bactericides; -high stability of the emulsions, obtained through an innovative and exclusive formulation system; - a very high level of surface finish of the pieces and tool life even at low concentrations and a superior cutting power in mechanical machining on aluminum alloys; -reduction of fumes during processing; - very effective anti-rust protection; - excellent resistance to foam formation, at normal concentrations of use, even with extremely soft water; -Excellent protection of Aluminum alloys even with low Silicon content. The fresh emulsion is clear, opalescent and becomes more concentrated during use.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a very high-quality coolant for cutting and grinding processes. It is also, under the recommended concentrations of use, highly resistant to the microbiological attack. It is formulated for mechanical processes of aluminum alloys, steel, including stainless steel and all ferrous materials. It is totally free from: -bactericides of any nature -formaldehyde and formaldehyde donors in particular -boron and boric compounds -chlorine and its derivatives -secondary amines and their derivatives It features: -Very high degree of tolerability for the operators thanks to the absence of bactericides -High stability of the emulsions, obtained through an innovative and exclusive formulation system -Very high level of surface finishing of the pieces and tool lifetime even at low concentrations and a superior cutting power in mechanical processes on aluminum alloys -Reduction of fumes during the processes -Very effective anti-rust protection -Excellent resistance to foam formation, at normal concentrations of use, even with extremely soft water -Excellent protection of aluminum alloys even with low silicon content The fresh emulsion appears clear, opalescent and becomes more concentrated during use.

Family: Water-miscible Coolants
Type: Mineral water-miscible coolant

It is a newly formulated high-quality water-miscible coolant for chip removal and cutting operations. It is made from a mixture of mineral oil, high greasing synthetic esters and specific EP additives to improve its cutting property. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It features: -high tolerability level for the operators -great stability of the emulsions, due to its high resistance to bacterial and fungal attacks -excellent surface finishings of the processed pieces -fumes reduction during the process -very good and long-lasting anti-rust property -excellent lubrication of the machine tools rails and sliding parts -perfect miscibility and stability, even with hard waters -excellent resistance to foaming, at normal levels of concentration, even with very soft waters The emulsion appears translucent, milky-white and its concentration tends to increase with usage. Mineral oil content is approximately 40%.

Family: Water-miscible Coolants
Type: Mineral water-miscible coolant

It is a newly formulated high-quality, water-miscible coolant for cutting and grinding processes. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It guarantees: -high degree of tolerability for the operators -exceptional stability of the emulsions, thanks to an innovative and exclusive system which makes the product highly resistant to bacterial and fungal attacks -higher level of surface finishing of the machined pieces and greater lifetime of the tools even at low concentrations; excellent cutting power -reduction of fumes during the processes -very effective anti-rust protection -excellent lubrication of the rails and of the machine tools sliding parts -perfect miscibility and stability even with hard waters -excellent resistance to foam formations, at normal concentrations of use, even with extremely soft waters The fresh emulsion appears clear, translucent, opalescent and tends to concentrate with use. The oil content is approximately 35% which is obtained from a mixture of mineral oil, synthetic esters with high greasy power and performance and specific EP additives to improve its cutting power

Family: Water-miscible Coolants
Type: Mineral water-miscible coolant

It is a newly formulated high-quality water-miscible EP coolant. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It features: -high level of tolerability for the operators -high level of stability of the emulsions, due to the product's high resistance to bacterial and fungal attacks -great cutting power -excellent tools lifetime, even at low concentrations -excellent surface finishings of the machined pieces -reduction of fumes during the processes -very good and long-lasting anti-rust power -excellent lubrication of the rails and of the machine tools sliding parts -perfect miscibility and stability, even with hard waters -excellent resistance to foaming, at normal concentrations levels, even with very soft waters The emulsion is of milky white appearance and tends to concentrate with usage. Oil content is approximately 35%, which is obtained from a mixture of mineral oil with high greasy and synthetic components and specific EP additives which ensure excellent anti-welding and EP power for cutting and chip removal operations.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a high-quality semi-synthetic coolant for cutting and grinding processes. It is free from chlorine, boric compounds, formaldehyde donors, biocides, secondary amines and their derivatives. It features: -exceptional stability of the emulsions, thanks to an innovative and exclusive system, which makes the product resistant to a bacterial and fungal attack -high level of surface finishing of the machined pieces and lifetime of the tools even at low concentrations; good cutting power -reduction of fumes during the processes -very effective rust protection -good lubrication of the rails and sliding parts of the machine tools -perfect miscibility and stability even with hard waters; -excellent resistance to foaming, at the normal concentrations of use, even with fresh waters; -excellent protection of aluminum alloys with low silicon content. The fresh emulsion appears clear, opalescent and tends to concentrate with use. The oil content is approximately 20%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a newly formulated semi-synthetic water-miscible coolant for cutting and grinding processes. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It guarantees: -good tolerability for the operators -great emulsions stability, due to the product’s high resistance to the bacterial and fungal attack. -high level of surface finishing of the machined pieces, tools lifetime and cutting power -reduction of fumes during the processes -effective anti-rust protection -perfect miscibility and stability even with hard waters -great resistance to foam formation, at normal usage concentrations, even with particularly fresh waters The fresh emulsion appears clear, translucent, opaline and tends to concentrate with use. Mineral oil content is of approximately 10%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a newly formulated high-quality semi-synthetic water-miscible coolant of universal use. It is designed for cutting and grinding processes. It does not contain chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It features: -good tolerability for the operators -excellent emulsions stability due to high resistance to bacterial and fungal attacks -excellent surface finishings, cutting properties and greater tools lifetime -reduction of the fumes during the processes -high anti-rust power -perfect miscibility and stability even in hard waters -high resistance to foaming, even with very soft waters In its original state, the emulsion is clear, translucent, opalescent and tends to concentrate with usage. Mineral oil content is approximately 10%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a high-quality and newly formulated semi-synthetic coolant for cutting and grinding operations. For this product, an innovative, advanced and exclusive bio-stabilization system has been adopted, making it exceptionally resistant to the microbiological attack, at the correct concentrations of use. It is free from chlorine, boric compounds, formaldehyde donors, secondary amines and their derivatives. It guarantees: -high degree of tolerability for the operators -excellent emulsions stability thanks to an innovative and exclusive system which guarantees resistance to bacterial and fungal attack -high degree of surface finishing of the machined pieces and tools lifetime even at low concentrations; good cutting power -reduction of fumes during the processes -great lubrication of the rails and the machine tools sliding parts - perfect miscibility and stability even with hard waters - great resistance to foam formations at normal use concentrations even with particularly sweet waters The emulsion appears fresh, translucent, opaline and tends to concentrate with use. Mineral oil content is of approximately 10%.

Family: Water-miscible Coolants
Type: Mineral water-miscible coolant

It is a high quality emulsifiable cutting lubricating coolant, complying with the most up-to-date hygienic-sanitary requirements, free from amines of any kind, from boron and boroderivatives and from donors of formaldehyde and bactericides containing methylisothiazolinones. It is obtained from severely hydrogenated mineral bases, with the addition of highly greasing synthetic additives. It is free from chloroparaffins. It forms very stable milky emulsions, with bacteriostatic characteristics, thanks to the use of cosmetic stabilizing additives. Presents: - established to bacterial attack and excellent resistance to fungal contamination; - excellent cleaning and decanting power of the scraps; - maximum hygienic-sanitary compatibility; - pleasant smell; - excellent protection of aluminum and its alloys, guaranteed by the low pH level buffered to less than 9 and by specific additives; - excellent cutting power; - excellent resistance to foaming. The emulsion is milky white, clean, pleasant to handle.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a high-quality semi-synthetic water-miscible coolant of universal use. It is designed for cutting and grinding processes. It is free from chlorine, formaldehyde donors, secondary amines and their derivatives. It features: -good tolerability level for the operators -excellent emulsions stability due to its high resistance to bacterial and fungal attacks -excellent finishings level, cutting property and greater tools lifetime, even at low concentrations -reduction of fumes during the processes -high anti-rust power -perfect miscibility and stability even with hard waters -great lubrication of the machine tools rails and sliding parts -high resistance to foaming, even with very soft waters In its original state, the fresh emulsion appears clear, translucent, opalescent and its concentration tends to increase with use. Mineral oil content is between 15 and 20%.

Family: Water-miscible Coolants
Type: Mineral water-miscible coolant

It is a newly formulated high-quality semi-synthetic water-miscible coolant of universal use. It is designed for cutting and grinding operations. It is free from chlorine, formaldehyde donors, secondary amines and their derivatives. It features: -good tolerability level for the operators - excellent emulsions stability due to high resistance to bacterial and fungal attacks -excellent surface finishing, cutting power and greater tools lifetime, even at low concentrations -reduction of fumes during the processes -high anti-rust power -perfect miscibility and stability even in hard waters -outstanding lubrication of the rails and the machine tools sliding parts -high resistance to foaming, even with very soft waters In its original state, the emulsion appears clear, translucent, opalescent and tends to concentrate with usage. Mineral oil content is between 25 and 30%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a semi-synthetic, water-miscible, cutting and grinding coolant. It is free from chlorine, formaldehyde donors, secondary amines and all their derivatives. It guarantees: - High degree of tolerability for the operators; - Excellent emulsions stability, due to high resistance to bacterial and fungal attack; - high level of machined parts surface finish, tool life and cutting power; - fumes reduction; - excellent rust protection; - perfect miscibility and stability even with hard water; - excellent resistance to mist formation even with freshwater; TORMA B 10 FF is clear, traslucent, opalescent and is concentrated during use. The content of mineral oil is around 10%.

Family: Water-miscible Coolants
Type: Semisynthetic water-miscible coolant

It is a semi-synthetic, water-miscible coolant designed for cutting and grinding processes. It is free from chlorine, formaldehyde donors, secondary amines and their derivatives. It features: -good tolerability level for the operators -excellent emulsions stability due to its high resistance to bacterial and fungal attacks -excellent finishings level, cutting property and greater tools lifetime -reduction of fumes during the processes -high anti-rust power -perfect miscibility and stability even with hard waters -high resistance to foaming, at normal usage concentrations, even with very soft waters In its original state, the fresh emulsion appears clear, translucent, opalescent and its concentration tends to increase with usage. Mineral oil content is approximately 10%.

Family: Water-miscible Coolants
Type: Mineral water-miscible coolant

It is a mineral-based water-miscible coolant, mixed with synthetic additives. It is designed for cutting and grinding operations. It does not contain formaldehyde, formaldehyde donors, secondary amines and their derivatives. It features: -good tolerability for the operators -excellent emulsions stability due to its high resistance to bacterial and fungal attacks -excellent finishings level and greater tools lifetime, even at low concentrations -reduction of fumes during the processes -high anti-rust property -perfect miscibility and stability even with hard waters -great lubrication of the rails and the machine tools sliding parts -high resistance to foaming -excellent cutting EP property, thanks to anti-welding additives In its original state, the emulsion is milky white, stable and its concentration tends to increase with use. Mineral oil content is approximately 50%.

Family: Water-miscible Coolants
Type: Mineral water-miscible coolant

It is a high-quality coolant for cutting processes and free from formaldehyde and formaldehyde donors, boron, boron derivatives and chloroparaffins. It is made from highly-hydrogenated mineral bases and forms very stable milky emulsions, with bacteriostatic characteristics. It guarantees: - excellent protection of copper and yellow alloys, guaranteed by the low buffered pH level below 9 and by specific additives; - very high resistance to the formation of soaps and lead residues; - high stability to bacterial attack and excellent resistance to fungal contamination; - excellent cleaning power and waste decantation; - maximum hygienic-sanitary compatibility; - light odour; - high cutting power; - excellent resistance to foam formation. The emulsion appears white-milky, clean and easy to handle.

Prodotto ECO
Family: Water-miscible Coolants
Type: Synthetic ester based water-miscible coolant

It is a cooling lubricant based on synthetic esters, of vegetal origin, of universal use and of high value, emulsifiable, cutting and grinding, of a new formulation, prepared according to the most recent acquisitions of modern technology to satisfy the most advanced requests for machining workshops. It is free from mineral oil, chlorine, secondary amines, preservatives releasing formaldehyde, boron and their derivatives and is not dangerous. Guarantees: -A high degree of tolerability for operators. -Excellent stability of the emulsions, due to the strong resistance of the product to the bacterial attack and from fungi. -A high level of surface finishing of machined parts and tool life even at low concentrations and good cutting power. -reduction of fumes in process. -Very effective antirust protection. -An excellent lubrication of the guides and the sliding parts of the machine tools. -Perfect miscibility and stability even with hard water. -Excellent resistance to the formation of foam, to normal concentrations of use, even with extremely sweet water. The fresh emulsion is clear, translucent, opaline and is concentrated during use. The content of synthetic esters is around 20%.

Prodotto ECO
Family: Water-miscible Coolants
Type: Synthetic ester based water-miscible coolant

It is a very innovative and prestigious watermiscible lubricant , based on synthetic esters coming from vegetable raw materials, that can be used for cutting and grinding processes and it is prepared following the most recent and advanced technology in order to satisfy the requests of the workshops for mechanical processing. In this case, it has been adopted an innovative, advanced and exclusive bio-stabilization system thanks to the usage of substances with a very low or null hygienic and sanitary impact. Those properties make the TORMA BIO 4 FREE, under the recommended usage concentrations, highly resistant to a microbiological attack. It is particularly recommended for manufacturing processing of steel, Alluminium alloys and ferrous materials. It is completely free from the following components: -mineral oil; -biocides of any nature; -formaldehyde and formaldehyde donors; -Boron and Boron compounds; -Chlorine and derivatives; -secondary amines and derivatives. It provides: -an extremely high tolerance level with to operator thanks to the total absence of biocides and the usage of substances with a very low or null hygienic and sanitary impact; -an high stability of the emulsions, thanks to an innovative and exclusive formula; -an exceptional level of surface finishing of the items and lifetime of the tools even with low concentrations and an higher cutting power in the mechanical processings of alluminium alloys; -a reduction of mist during the processings; -very effective anti-rust protection; -excellent resistance to foaming even in particularly soft waters; -excellent protection of aluminium alloys even with low silicon content. The fresh emulsion appears very clear, translucent, opalescent and increase the concentration during the usage.

Family: Industrial lubricants
Type: Synthetic water-miscible coolant

It is a watermiscible synthetic coolant that creates transparent solutions lightly amber. It is specific for cutting, grinding and chip removal processes both for ferrous metals and aluminum alloys, included those with low silicon content. The product is also compatible with yellow alloys and plastic materials. TORMA BIOCHEM is fully synthetic, free from mineral and vegetable ester oil, chlorine, boron and its derivates, bactericidal donors of formaldehyde, secondary ammines. It has a light odor and an excellent level of tollerability for the operators. It is possible having a clear vision of the product in process thanks to its transparent property. It is very detergent, clean and resistant to sludge, residues and encrustations formation. TORMA BIOCHEM is also characterized by: - Excellent lubricating power due to its additives and synthetic properties; - High detergent power for machines and worked pieces; - High level of resistance against bacterial and fungal contamination; - Excellent E.P. and antiwear power; - Excellent antifoam properties; - No presence of residues and stains on yellow alloy process; - Excellent stability and performance duration; - High demulsive performances from tramp oil; - Low concentration refills; - Excellent scrap decantation and grinding dust power. The properties mentioned assure excellent finishing product and tool life in a clean and comfortable working environment.

Family: Industrial lubricants
Type: Synthetic water-miscible coolant

It is a watermiscible synthetic coolant that creates transparent solutions lightly amber. It is specific for cutting, grinding and removal mechanical processes both for ferrous metals and aluminum alloys, included those with low silicon content. The product is also compatible with yellow alloy process. TORMA BIOCHEM LC is fully synthetic, free from mineral and vegetable oil, chlorine, boron and its derivates (bactericidal donors of formaldehyde, secondary ammines). It has a light odor and an excellent level of tollerability for the operators. It is possible having a clear vision of the product in process thanks to its transparent property. It is very detergent, clean and resistant to sludge, residues and encrustations formation. TORMA BIOCHEM LC is also characterized by: -Excellent lubricating power due to its additives and synthetic properties; -High detergent power for tool machines and workload; -High level of resistance against bacterial and fungal contamination; -Excelent e.p. and antiwear power; -Antifoam; -No presence of residues and stains on yellow alloy process; -Excellent stability and performance duration; -High demulsive per; -Low operation costs, the solution tend to be concentrated during the process with low concentration refills; -Excellent scrap decantation and grinding dust power. The properties mentioned assure excellent finishing product and tool life in a clean and comfortable working environment.

Prodotto ECO
Family: Water-miscible Coolants
Type: Synthetic ester based water-miscible coolant

It is a cooling lubricant based on biodegradable synthetic esters of vegetable origin, of the highest quality, emulsifiable, for cutting and grinding, of new formulation, prepared according to the most recent acquisitions of modern technology to meet the most advanced requests of the workshops for mechanical processing . In particular, an innovative, advanced and exclusive bio-stabilization system has been adopted, which makes TORMA BIO ECO FB, at the recommended concentrations of use, highly resistant to microbiological attack. It has been specially designed for the processing of yellow alloys and ferrous materials. It is totally free from: -mineral oil; -bactericides of any nature; -formaldehyde and formaldehyde donors in particular; -Boron and boric compounds; - Chlorine and derivatives; - secondary amines and their derivatives. It ensures: - a very high degree of tolerability for operators thanks to the absence of bactericides; - high stability of the emulsions, thanks to an innovative and exclusive formulation system; - an exceptional level of surface finish of the pieces and tool life even at low concentrations and a superior cutting power in mechanical machining on yellow alloys with low or no lead content; -reduction of fumes during processing; - very effective anti-rust protection; - excellent resistance to foaming, at normal concentrations of use, even with extremely soft water. The fresh emulsion is clear, translucent, opalescent and becomes more concentrated during use.

Family: Forming and Drawing Lubricants
Type: Water-miscible hot drawing fluids

TORMA HOT DRAW 10 GF PL is a hydrosoluble product designed as a release fluid in hot forming processes of steel. It consists of a finely micronized and specially treated dispersion of natural graphite in water, with specific additives which ensure the product's stability and conformity over time and improve its lubricating and release properties. It guarantees: - Effective reduction of friction and wear between the material and the mold’s surface; - Exceptional mold cleanliness, resulting in lack of deposits and fillings or loss of tolerance limits; - Total absence of fumes and flames for safe operations; - Hygenic-sanitary and environmental compatibility thanks to the high quality of the graphite used; - Great release power with high quality finitures; - Exceptional smoothness and high wetting power so the product disperses on the metal surface quickly and evenly.

Family: Forming and Drawing Lubricants
Type: Water-miscible hot drawing fluids

It is a water-soluble product free from both graphite and oil, based on specific anti-welding additives and greasy additives which provide high lubricating and release characteristics in hot aluminum deformation operations. The product also finds application in some hot deformation processes of steel and brass. The excellent balance of the raw materials gives a high covering power and the formation of a tenacious lubricating-release film necessary for the correct flow of the material. Characteristics: • excellent detachment and lubrication effect between parts and tools; • significant increase in mold life; • very low percentage of waste; • high wettability at high temperatures and reduced tendency to "beading" phenomena; • absence of smoke and flames; • greater cleanliness of the systems and easier dispensing; • high solubility in water.

Family: Forming and Drawing Lubricants
Type: Water-miscible hot drawing fluids

It’s a water soluble product free from graphite and oil. It’s based on specific anti welding and greasy additives that give to the product high lubricant and detaching properties during hot forging operations of steel. The perfect balance between raw materials permits high covering power and a solid lubro-detaching film formation necessary for the right slide of the material. TORMA HOT DRAW 20 PL: - Excellent detaching and lubricant power between piece and tools; - High increase in mould’s life; - Low waste percentage; - High wettability to elevate temperatures; - Low tendency to bead phenomenon; - Absence of fumes and flames; - Higher machine clean and easy to delivery; - High solubility in water.

Family: Forming and Drawing Lubricants
Type: Water-miscible hot drawing fluids

It is a water-soluble product free from both graphite and oil, based on specific anti-soldering additives which give high lubricating and release characteristics in the hot deformation operations of steels and Aluminium alloys. The excellent balance of the raw materials confers a high covering power and the formation of a tenacious lubricating-release film necessary for the correct sliding of the material. Characteristics: - excellent detachment and lubrication effect between part and tools; - increase in the life of the molds; - very low percentage of waste; - high wettability at high temperatures and reduced tendency to “beading” phenomena; - absence of smoke and flames; - greater cleaning of the systems and ease of dispensing; - high solubility in water; - absolute protection of Aluminium alloys.

Family: Industrial lubricants
Type: -

TORMA HOT DRAW CR 13 GF is an oily liquid, with a creamy consistency, of a black color, particularly studied as a release fluid in the forging and hot stamping of metals, especially ferrous, such as steels, alloy steels, cast iron, etc. It consists of a dispersion in water of natural graphite, finely micronized and treated in a special and exclusive way, with specific additives, which, on the one hand, ensure the stability and conformity of the product over time and, on the other, improve the lubricating and release properties. It guarantees: - effective reduction of friction and wear between the material and the surface of the mold; - total absence of fumes and flames for operations in total safety; - hygienic-sanitary and environmental compatibility, thanks to the quality of the natural graphite used; - excellent release power with high quality finishes; - excellent smoothness and high wetting power, whereby the oil is dispersed on the metal surface quickly and uniformly.

Family: Water-miscible Coolants
Type: Mineral water-miscible coolant

It is a mineral-based concentrate, formulated for the on-site preparation of a water-based hydraulic fluid with excellent fire-resistance properties, high lubricity and anti-corrosion protection. It is a newly formulated, semi-synthetic, mineral-based water-miscible fluid, free from formaldehyde and formaldehyde donors, chlorine, secondary amines and their derivatives. When dissolved in water, it forms an emulsion with the following characteristics: -great filterability -compatibility with the most common gaskets -excellent resistance to bacterial and fungal attacks -great anti-rust protection -perfect miscibility and stability even with relatively hard waters -excellent resistance to foam formations, at normal concentrations of use The emulsion appears clear, translucent and opalescent. Mineral oil content is approximately 10%.

Family: Special products
Type: Special product

It is a silicone fluid, emulsified in water, ready to use, with a milky appearance and white color, with lubricating and softening properties, obtained from highly refined and selected raw materials, ideal for applications in the textile field and in the rubber and rubber industry. plastic. Hygienic-sanitary compatibility is high, as it meets the Italian and European Pharmacopoeia standards. Presented by: -excellent lubricating power; - excellent softening power to guarantee cutting and sewability on fabrics and knitwear; -high detaching power against rubber, plastic and molds; The active part content is around 34%.

Prodotto ECO
Family: Emulsifiable coolant for textile industry
Type: Bio based emulsifiable coolants for the production of synthetic yarn

An emulsifying cooling lubricant, release agent, designed for the textile industry. It is formulated from synthetic esters of vegetable origin that guarantee excellent release and antistatic power on synthetic fibres. It is totally free from - mineral oil; - formaldehyde and formaldehyde donors; - boron and boric compounds; - chlorine and its derivatives; - secondary amines and their derivatives. It guarantees: - a very high degree of tolerability for operators thanks to the absence of mineral oil and carcinogenic compounds; - high emulsion stability, thanks to an innovative and exclusive formulation system; - highly effective rust protection; - excellent resistance to foam formation at normal concentrations of use, even with extremely soft waters; - excellent greasing and wetting power that guarantees a reduction in wire-to-metal and wire-to-ceramic friction; - excellent compatibility with all polymers used for synthetic fibres; - high antistatic property; - high washability; The fresh emulsion has milky appearance.

Family: Industrial lubricants
Type: Slideways mineral oil

It is a complex lubricating mineral oil, designed for the lubrication of guides, slides, tables, surfaces and sliding columns of machine tools. It is obtained by mixing different components and is characterized by a very low coefficient of static friction (that is, when stationary, at start) and, in particular, lower than dynamic (ie moving), to ensure a smooth and uniform progression of wagons and boards, even if subjected to heavy loads. In fact, they slow down, approaching the limit switch, and they come to a stop, for a moment, before resuming the reverse return motion. At this time, if the coefficient of static friction was higher, as it normally does, at the coefficient of dynamic friction, the carriage or the table would object to greater resistance to movement, causing first a longer stop and then a brusque and quicker start. In this way, instead, all the consequent vibration and hopping (stick-slip) phenomena are eliminated which cause a poor degree of finishing of the pieces during mechanical processing. This lubricant also has marked E.P. (Extreme Pressures) to protect the moving mechanical parts against each other in the presence of high specific pressures. It provides: - Excellent anti stick-slip power. - Exceptional anti-wear and E.P. - Good filterability. - Excellent demulsiveness characteristics. - Excellent thermal-oxidative stability.

Family: Industrial lubricants
Type: Slideways mineral oil

It is a complex lubricating mineral oil, designed for the lubrication of guides, slides, tables, surfaces and sliding columns of machine tools. It is obtained by mixing different components and is characterized by a very low coefficient of static friction (that is, when stationary, at start) and, in particular, lower than dynamic (ie moving), to ensure a smooth and uniform progression of wagons and boards, even if subjected to heavy loads. In fact, they slow down, approaching the limit switch, and they come to a stop, for a moment, before resuming the reverse return motion. In this instant, if the coefficient of static friction was higher, as it normally happens, to the coefficient of dynamic friction, the carriage or the table would oppose a greater resistance to the movement, causing first a longer stop and then a brusque and quicker start. In this way, instead, all the consequent vibration and hopping (stick-slip) phenomena are eliminated which cause a poor degree of finishing of the pieces during mechanical processing. This lubricant also has marked E.P. (Extreme Pressures) to protect the moving mechanical parts against each other in the presence of high specific pressures. It provides: - Excellent anti stick-slip power. - Exceptional anti-wear and E.P. - Good filterability. - Excellent demulsiveness characteristics. - Excellent thermal-oxidative stability.

Family: Industrial lubricants
Type: Slideways mineral oil

It is a complex lubricating mineral oil, designed for the lubrication of guides, slides, tables, surfaces and sliding columns of machine tools. It is obtained by mixing different components and is characterized by a very low coefficient of static friction (that is, when stationary, at start) and, in particular, lower than dynamic (ie moving), to ensure a smooth and uniform progression of wagons and boards, even if subjected to heavy loads. In fact, they slow down, approaching the limit switch, and they come to a stop, for a moment, before resuming the reverse return motion. At this time, if the coefficient of static friction was higher, as it normally does, at the coefficient of dynamic friction, the carriage or the table would object to greater resistance to movement, causing first a longer stop and then a brusque and quicker start. In this way, instead, all the consequent vibration and hopping (stick-slip) phenomena are eliminated which cause a poor degree of finishing of the pieces during mechanical processing. This lubricant also has marked E.P. (Extreme Pressures) to protect the moving mechanical parts against each other in the presence of high specific pressures. It provides: - Excellent anti stick-slip power. - Exceptional anti-wear and E.P. - Good filterability. - Excellent demulsiveness characteristics. - Excellent thermal-oxidative stability.

Family: Industrial lubricants
Type: Slideways mineral oil

It is a complex lubricating mineral oil, designed for the lubrication of guides, slides, tables, surfaces and sliding columns of machine tools. It is obtained by mixing different components and is characterized by a very low coefficient of static friction (that is, when stationary, at start) and, in particular, lower than dynamic (ie moving), to ensure a smooth and uniform progression of wagons and boards, even if subjected to heavy loads. In fact, they slow down, approaching the limit switch, and they come to a stop, for a moment, before resuming the reverse return motion. At this time, if the coefficient of static friction was higher, as it normally does, at the coefficient of dynamic friction, the carriage or the table would object to greater resistance to movement, causing first a longer stop and then a brusque and quicker start. In this way, instead, all the consequent vibration and hopping (stick-slip) phenomena are eliminated which cause a poor degree of finishing of the pieces during mechanical processing. This lubricant also has marked E.P. (Extreme Pressures) to protect the moving mechanical parts against each other in the presence of high specific pressures. Finally, the high adhesive power minimizes possible dripping. It provides: - Excellent anti stick-slip power. - Exceptional anti-wear and E.P. - Good filterability. - Excellent demulsiveness characteristics. - Excellent thermal-oxidative stability. - Strong non-drip flowing power.

Family: Industrial lubricants
Type: Slideways mineral oil

It is a complex lubricating mineral oil, designed for the lubrication of guides, slides, tables, surfaces and sliding columns of machine tools. It is obtained by mixing different components and is characterized by a very low coefficient of static friction (that is, when stationary, at start) and, in particular, lower than dynamic (ie moving), to ensure a smooth and uniform progression of wagons and boards, even if subjected to heavy loads. In fact, they slow down, approaching the limit switch, and they come to a stop, for a moment, before resuming the reverse return motion. At this time, if the coefficient of static friction was higher, as it normally does, at the coefficient of dynamic friction, the carriage or the table would object to greater resistance to movement, causing first a longer stop and then a brusque and quicker start. In this way, instead, all the consequent vibration and hopping (stick-slip) phenomena are eliminated which cause a poor degree of finishing of the pieces during mechanical processing. This lubricant also has marked E.P. (Extreme Pressures) to protect the moving mechanical parts against each other in the presence of high specific pressures. Finally, the high adhesive power minimizes possible dripping. It provides: - Excellent anti stick-slip power. - Exceptional anti-wear and E.P. - Good filterability. - Excellent demulsiveness characteristics. - Excellent thermal-oxidative stability. - Strong non-drip flowing power.

Family: Industrial lubricants
Type: Slideways mineral oil

It is a complex lubricating mineral oil, designed for the lubrication of guides, slides, tables, surfaces and sliding columns of machine tools. It is obtained by mixing different components and is characterized by a very low coefficient of static friction (that is, when stationary, at start) and, in particular, lower than dynamic (ie moving), to ensure a smooth and uniform progression of wagons and boards, even if subjected to heavy loads. In fact, they slow down, approaching the limit switch, and they come to a stop, for a moment, before resuming the reverse return motion. At this time, if the coefficient of static friction was higher, as it normally does, at the coefficient of dynamic friction, the carriage or the table would object to greater resistance to movement, causing first a longer stop and then a brusque and quicker start. In this way, instead, all the consequent vibration and hopping (stick-slip) phenomena are eliminated which cause a poor degree of finishing of the pieces during mechanical processing. This lubricant also has marked E.P. (Extreme Pressures) to protect the moving mechanical parts against each other in the presence of high specific pressures. Finally, the high adhesive power minimizes possible dripping. It provides: - Excellent anti stick-slip power. - Exceptional anti-wear and E.P. - Good filterability. - Excellent demulsiveness characteristics. - Excellent thermal-oxidative stability. - Strong anti-drip flowing power.

Family: Industrial lubricants
Type: Slideways mineral oil

It is a complex lubricating mineral oil, designed for the lubrication of guides, slides, tables, surfaces and sliding columns of machine tools. It is obtained by mixing different components and is characterized by a very low coefficient of static friction (that is, when stationary, at start) and, in particular, lower than dynamic (ie moving), to ensure a smooth and uniform progression of wagons and boards, even if subjected to heavy loads. In fact, they slow down, approaching the limit switch, and they come to a stop, for a moment, before resuming the reverse return motion. At this time, if the coefficient of static friction was higher, as it normally does, at the coefficient of dynamic friction, the carriage or the table would object to greater resistance to movement, causing first a longer stop and then a brusque and quicker start. In this way, instead, all the consequent vibration and hopping (stick-slip) phenomena are eliminated which cause a poor degree of finishing of the pieces during mechanical processing. This lubricant also has marked E.P. (Extreme Pressures) to protect the moving mechanical parts against each other in the presence of high specific pressures. Finally, the high adhesive power minimizes possible dripping. It provides: - Excellent anti stick-slip power. - Exceptional anti-wear and E.P. - Good filterability. - Excellent demulsiveness characteristics. - Excellent thermal-oxidative stability. - Strong anti-drip flowing power.

Family: Industrial lubricants
Type: Slideways mineral oil

This particular "ashless" oil has been formulated for those machine tools that have a single centralised system for the actuation of the hydraulic controls and for the lubrication of the guides and the sliding slides. It therefore has the following combined properties: -high resistance to thermal-oxidative decay and to the formation of carbonous residues, to allow a high functional life of the oil charge; -high anti-wear power, to minimise the wear and tear of pumps, valves and moving mechanical parts; -high antioxidant power for the protection of gaskets and stuffing box; greasy power, with reduction of the coefficient of static friction below the dynamic one, in order to make smooth and uniform movement of the wagons and of the boards and to avoid thus vibrations and hopping (stick-slip) that are the cause of bad finishes of the machining Parts.

Family: Industrial lubricants
Type: Slideways mineral oil

It is a lubricating mineral oil obtained from severely refined paraffin bases and hydrofinite, characterised by a particularly effective antioxidant additivation package, which ensures the stability of the product over time even at relatively high temperatures. Moreover, the presence of metal passivators and deactivating agents not only strongly influences the resistance to thermal-oxidative decay of the product, but also ensures the prevention of rust and the protection of copper parts and pieces in copper alloys . This oil is also equipped with a good dispersing power to avoid that any external contaminants can settle on the moving mechanical parts.

Family: Industrial lubricants
Type: Slideways mineral oil

This particular "ashless" oil has been formulated for those machine tools that have a single centralised system for the actuation of the hydraulic controls and for the lubrication of the guides and the sliding slides. It therefore has the following combined properties: -high resistance to thermal-oxidative decay and to the formation of carbonous residues, to allow a high functional life of the oil charge; -high anti-wear power, to minimise the wear and tear of pumps, valves and moving mechanical parts; -high antioxidant power for the protection of gaskets and stuffing box; -untuping power, with reduction of the coefficient of static friction below the dynamic one, in order to make smooth and uniform movement of the wagons and of the boards and to avoid thus vibrations and hopping (stick-slip) that are the cause of bad finishes of the machining Parts.

Family: Industrial lubricants
Type: Slideways mineral oil

This particular "ashless" oil has been formulated for those machine tools that have a single centralised system for the actuation of the oleodinamic controls and for the lubrication of the guides and the sliding slides. It therefore has the following combined properties: -high resistance to thermal-oxidative decay and to the formation of carbonous residues, to allow a high functional life of the oil charge; -high anti-wear power, to minimise the wear and tear of pumps, valves and moving mechanical parts; -high antioxidant power for the protection of gaskets and stuffing box; -greasy power, with reduction of the coefficient of static friction below the dynamic one, in order to make smooth and uniform movement of the wagons and of the boards and to avoid thus vibrations and hopping (stick-slip) that are the cause of bad finishes of the machining parts.

Family: Industrial lubricants
Type: Slideways mineral oil

It’s a mineral lubricant oil with selected paraffinic bases. The additive antioxidant package of the product is very useful and ensures its stability during time, even with high temperature. The metal and passivators presence not only influences the oxidation resistance of the product, but also assures rust prevention, protection of the parts made of copper and copper alloy. WAY SV/C 32 has a very good evaporative power to avoid deposit of any external contaminants on the mechanical parts.

Family: Industrial lubricants
Type: Slideways mineral oil

It’s a mineral lubricant oil with selected paraffinic bases. The additive antioxidant package of the product is very useful and ensures its stability during time, even with high temperature. The metal and passivators presence not only influences the oxidation resistance of the product, but also assures rust prevention, protection of the parts made of copper and copper alloy. WAY SV/C 32 has a very good evaporative power to avoid deposit of any external contaminants on the mechanical parts.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is a highly additivated neat oil, for molding and deep drawing of highly alloyed and stainless steel, free from mineral oil and based on synthetic and natural biodegradable esters, mixed with organic compounds containing chlorine and anti-wear additives, antioxidants and metal passivators, which a synergistic action between them gives rise to a product with exceptional performance. In fact, it presents: - reduced formation of fumes and vapors during processing; - high flame resistance, for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, whereby the oil is dispersed on the metal surface quickly and uniformly; - excellent greasing power; - exceptional anti-welding cutting power, EP and lubricating-release agent for high quality finishes; - good resistance to oxidation and rust; -Good anti-wear properties. The liquid is clear, of moderate odor.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is a whole oil for mechanical machining mainly used in deformation and shearing operations, but also for the removal of chips. It is of medium viscosity, obtained from a highly selected paraffinic mineral base and composed with additives of extreme pressure sulphorphic-phosphorous, sulphated active and inactive and untuosanti, which include a very effective synertozing action with strong Antisaldanti Properties. These give the product a very high release power, especially in the machining of high strength alloy steels and stainless steel. The product is of light color, very moderate odor and is chlorine-free.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is a strongly additivated lubricant based on chlorine, mineral oil, greasing agents of natural and synthetic origin, antioxidants and metal passivators, designed for deep drawing process of alloy and stainless steel. The fluid appears clear, of very moderate odour and average viscosity, adhesive and with an exceptional release and anti-welding power. It is stabilized against oxidation.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is an oil to be used for molding and shearing of ferrous materials, with extraordinary anti-soldering and release properties, particularly suitable for high hardness stainless steels, when deep drawing with complex geometries is required and when high quality finishes are required. Free from mineral oil, it is obtained from a mixture of chlorinated compounds, active / inactive sulfur compounds, natural and synthetic greasing agents, friction modifying, anticorrosive and antioxidant additives. These form a complex system, exerting an exclusive and particularly effective synergistic action between them, which allows for an absolutely unique product that ensures: - an exceptional and singular detaching-antisoldering power; - surface gloss; - exceptional durability of the molds; - surface finishes of the machined pieces of the highest quality; - low odors; - hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is a lubricant with very strong anti-friction and release properties to be used for drawing and blanking processes of ferrous materials, particularly high-hardness stainless steel, whenever complex-geometry and high-quality finishes deep drawing processes are required. It is made from synthetic hydrocarbon bases, free from mineral oil and characterized by an exceptional "viscoelastic" response to loads. The product is mixed with: -active/inactive sulphated compounds; -sulphorphic-phosphorated compounds; -greasing agents of natural and synthetic origin; -friction modifiers; -anticorrosive and antioxidants. These form a complex system by exerting among each other an exclusive and particularly effective synergical action, which allows to obtain an absolutely unique product that guarantees: -an exceptional release and anti-welding power; -Shiny surfaces; -anti-rust protection -Exceptional durability of moulds; -High quality surface finishing of the machined pieces; -Light odors; -Hygienic-sanitary compatibility. It is free of chlorine and chlorinated derivatives.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is an oil to be used for molding and shearing ferrous materials, equipped with very strong anti-welding and release properties, particularly suitable for highly hard stainless steels, when deep drawings with complex geometries must be carried out and when high quality finishes are required. Free from mineral oil, it is obtained from synthetic hydrocarbon bases, characterized by an exceptional "viscoelastic" response to loads, mixed with: - active/inactive sulfur compounds; - sulfur-phosphorus compounds; - unctuous agents of natural and synthetic origin; - friction modifier additives; - anti-corrosion and antioxidants. These form a complex system, exercising an exclusive and particularly effective synergistic action between them, which allows us to obtain an absolutely unique product that guarantees: - an exceptional and singular release-anti-welding power; - shine and anti-rust protection of surfaces; - exceptional mold durability; - surface finishes of the machined pieces of the highest quality; - low odors; - hygienic-sanitary compatibility. It is free from chlorine and chlorinated derivatives.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is a neat oil with strong additives for molding, drawing and shearing, of highly alloyed steels and stainless steel, based on active organic ingredients containing chlorine, mineral oil, natural and synthetic greasing agents, antioxidants and metal passivators and is NOT DANGEROUS. The liquid is clear, very moderate odor, viscous, sticky. X-DRAW 900 CL ensures: - an extraordinary detaching-antisoldering power; -high viscosity index for constant smoothness over a wide range of temperatures; - surface gloss; -life of molds and pieces; - low odors; - excellent hygienic-sanitary compatibility. It is stabilized against aging.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat oil formulated for molding, drawing, shearing, etc., of sheets and strips in high-strength alloy steel and stainless steel. It has an EP power, anti-seize and lubricant release, obtained through the use of different compounds that exert a strong synergistic action between them. It consists of a blend of naturally derived synthetic esters, mixed with active/inactive and complex sulfur compounds, which, by exerting a strong synergistic action between them, also ensures: - very high greasing and lubricating-releasing power for quality finishes even in the presence of high-tenacity materials; - excellent resistance to oxidation, rust and the formation of sludge and dry and sticky residues, thanks to a particular and exclusive formulation combination; - excellent anti-wear power for the preservation of the molds; - absence of fumes and vapors in processing; - high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and an exceptional wetting power, whereby the oil disperses on the metal surface quickly and uniformly; - low temperature of the machined pieces; - biodegradability; - maximum tolerability by operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs)

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat oil formulated for molding, drawing, shearing, etc., of sheets and strips in high-strength alloy steel and stainless steel. It has an exceptional EP power, anti-seize and lubricant release, obtained through the use of different compounds that exert a strong synergistic action between them. It consists of a blend of naturally derived synthetic esters, mixed with active / inactive and complex sulfur compounds, which, by exerting a strong synergistic action between them, also ensures: - very high greasing and lubricating-releasing power for quality finishes even in the presence of high-tenacity materials; - excellent resistance to oxidation, rust and the formation of sludge and dry and sticky residues, thanks to a particular and exclusive formulation combination; -excellent anti-wear power for the preservation of the molds; - absence of fumes and vapors in processing; - high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and an exceptional wetting power, whereby the oil disperses on the metal surface quickly and uniformly; - low temperature of the machined pieces; -biodegradability; - maximum tolerability by operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs)

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

Neat oil for forming, drawing and shearing, etc., high-resistant alloy steel and stainless steel sheets and strips, used when it’s required a product with a high EP power and anti-seizing and detaching characteristics, for very severe drawing operations of geometrically complex pieces. It is based on natural oils, refined thanks to a unique method, mixed with active-inactive and complex sulfur compounds which exert a strong synergic action each other. It provides: - very high greasing and detaching power high quality finishes, even with hard materials; - high resistance to oxidation, rust and formation of sludge and solid and sticky residuals; - excellent anti-wear properties ensuring the protection of molds; - no smokes and vapors during the process; - high flashpoint, for completely safe operations; - excellent smoothness, even at low temperatures, and wetting power, so that the oil spreads rapidly and uniformly on the metallic surface; - low temperature of workpieces; - complete biodegradability; - maximum tolerance by operators, since it does not contain any harmful and irritant components. The product is free from chlorinated compounds and polycyclic aromatic hydrocarbons (PAHs).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat lubricant free from mineral oil and made from refined synthetic and natural biodegradable esters mixed with sulfur compounds, greasy agents, antioxidants and metal passivators. It is especially formulated for drawing, deep drawing, fine blanking and tapping processes of alloy steel as well as cold drawing operations on steel and high-strength alloy and stainless steel. It guarantees: -abscence of fumes and mists during the processes -high flash point -excellent smoothness even at low temperatures and exceptional wetting power, allowing the lubricant to quickly and uniformly disperse on the metal surface -excellent greasing, EP and lubro-detaching power for quality finishes -excellent resistance to oxidation, rust, sludge and dry and sticky residues formations -good anti-wear power -light odour -low temperature of the machined pieces -biodegradability -maximum tolerability for the operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It’s a neat oil specific for stamping, deep-drawing and blanking operations for metal sheets, high resistance alloy steel and stainless steel. This product is suitable when it’s required EP, anti-seize and detaching power of geometrical complex formation pieces during heavy operations. It’s a mixture of natural oils, biodegradable, refined with an exclusive method and also with active/inactive and complex sulfur compounds. These properties guarantee: - Excellent oily capacity and lubro-detaching power for high quality finishes even with hard materials; - Excellent resistance to oxidation, rust and to the formation of sludge and dry, sticky residues; - Excellent anti wear power for moulds storage; - No presence of fumes and mist during operations; - High flammability point for operations in absolute safety; - Very high fluency even with low temperatures; - Excellent wetting power assuring the dispersion of the oil fast and uniform; - Biodegradability; - Very high tolerability for operato The product is free from chlorinated compounds and Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat lubricant, free from mineral oil and designed for tapping, drawing, deep drawing and fine blanking operations of high-resistance alloy steel. It is composed of highly refined biodegradable synthetic and natural esters mixed with active/inactive sulfur compounds, greasy components, specific solfur-phosphorus additives, anti-oxidants and metal passivators which, by exerting among each other a strong synergetic action, guarantee: - Absence of fumes and vapors duri the processes - High flash point f totally safe operations - Excellent fluidity even at low temperatures - Excellent wetting pow allowing the oil to quickly and uniformly dispersing over the treated pieces - Excellent releasing power - Excellent EP power for maximum quality finishes - Excellent oxidation and rust resistance - Excelle anti-wear and anti-welding power The product is free from chlorinated compounds and it does not contain Polycyclic Aromatic Hydrocarbons (P.A.H.).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It’s a neat lubricant for mechanical operations, free from mineral oil. It’s suitable for tapping, molding, deep drawing and blanking operations of high resistance alloy steel. Its components are: - Synthetic and natural biodegradable esters - Active/inactive sulfur compounds - Waxy additives - Antioxidants - Metallic passivators X-DRAW BIO 40 TF guarantees: - Absence of fumes and vapors during operation - High flash point for operations totally safe - Excellent fluidity even at low temperatures - Excellent wetting power making the dispersion of the oil fast and uniform over the treated pieces - Excellent releasing power - Excellent EP power for maximum quality finishes - Excellent oxidation and rust resistance - Excellent anti wear and anti-welding power The product is free from chlorinated compounds and it does not contain Polycyclic Aromatic Hydrocarbons (P.A.H.).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat lubricant free from mineral oil and made from refined synthetic and natural biodegradable esters mixed with sulfur compounds, greasy agents, antioxidants and metal passivators. It is especially formulated for drawing, deep drawing, fine blanking and tapping processes of alloy steel as well as cold drawing operations on steel and high-strength alloy and stainless steel. It guarantees: -abscence of fumes and mists during the processes -high flash point -excellent smoothness even at low temperatures and exceptional wetting power, allowing the lubricant to quickly and uniformly disperse on the metal surface -excellent greasing, EP and lubro-detaching power for quality finishes -excellent resistance to oxidation, rust, sludge and dry and sticky residues formations -good anti-wear power -light odour -low temperature of the machined pieces -biodegradability -maximum tolerability for the operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs).

Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat lubricant free from mineral oil and made from refined synthetic and natural biodegradable esters mixed with sulfur compounds, greasy agents, antioxidants and metal passivators. It is especially formulated for drawing, deep drawing, fine blanking and tapping processes of alloy steel as well as cold drawing operations on steel and high-strength alloy and stainless steel. It guarantees: -abscence of fumes and mists during the processes -high flash point -excellent smoothness even at low temperatures and exceptional wetting power, allowing the lubricant to quickly and uniformly disperse on the metal surface -excellent greasing, EP and lubro-detaching power for quality finishes -excellent resistance to oxidation, rust, sludge and dry and sticky residues formations -good anti-wear power -light odour -low temperature of the machined pieces -biodegradability -maximum tolerability for the operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

Neat oil, free from mineral oil, specific for pressing and blanking of ferrous materials and Aluminium alloys, when a lubricant for food industry is required. It is made of synthetic based sature esters, biodegradable, highly greasing and in mixture with antioxidant and metallic passivators additives. It is nontoxic with NSF 3H classification and made of food grade components. Features: - reduced fumes and vapours formation while working; - high flash point for absolutely safe operations; - excellent smoothness even at low temperatures and excellent wetting power, which allows to disperse the oil on the metallic surface quickly and uniformly; - excellent greasing and lubro-detatching power for high quality finishing; - good resistance to oxidation and rust; - excellent release capacity for moulds, trays, ovens in contact with food; - It is also widely used in the food industry as a release agent for moulds, trays, ovens and in all those applications where food contact requires a food lubricant; - good antiwear and cutting antiweld power. The product is free from Chlorine and Chlorine compounds.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

This is a neat metalworking fluid, designed for machining, milling, boring, tapping, moulding, bossing, shearing, and other operations when there is a need for a product with a high EP power. It does not contain mineral oils. It is made up from synthetic esters mixed with active/inactive sulphur-containing compounds, greasing agents, sulphur-and-phosphorus-containing additives, antioxidants and metal passivators. Working synergistically, these ingredients ensure: - the absence of fumes or vapours while machining; - a high flashpoint and safe operations; - an excellent fluidity, even at low temperature and a higher wetting power, thanks to which the oil spreads out over the metallic surface quickly and uniformly; - outstanding greasing, EP and detaching power, for high quality finishes; - good resistance to oxidation and rust; - good antiwear properties; - an excellent antiwelding power. This product does not contain chlorine or chlorinated compounds.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat lubricant for mechanical processes, free from mineral oil and formulated for drawing, deep drawing, fine blanking and tapping of high-strength steels, whenever a product with very high EP power is required. It consists of synthetic and natural biodegradable esters refined with an exclusive method, in mixture with active/inactive sulphated compounds, with untuosant and solpho-phosphorated additives, antioxidants and metal passivators, which, by exerting among themselves a strong synergy action, guarantee: -No fumes and vapours in production; -High flash point for absolute safety operations; -Excellent smoothness even at low temperatures and an exceptional wetting power, so that the oil is dispersed on the metal surface quickly and evenly; - - excellent greasing power, EP and lubro-detaching for quality finishes; - good resistance to oxidation and rust; - good anti-wear power; - biodegradability; - excellent anti-welding, deformation and cutting power. The product is free from chlorinated compounds and does not contain polycyclic aromatic hydrocarbons (PAHs).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is an oil for mechanical processing, neat, free from mineral oil, formulated for molding, drawing, fine blanking and tapping of high-strength alloy steels and stainless steel, when a product with a high EP power is required. It consists of synthetic and natural biodegradable esters refined with an exclusive method, mixed with active and inactive sulfur compounds, with greasy agents, antioxidants and metal passivators, which, exerting a strong synergistic action between them, ensures: - absence of fumes and vapors in processing; - a high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, whereby the oil disperses quickly and uniformly on the metal surface; -excellent greasing power, and good EP and lubricating-release power for quality finishes; - excellent resistance to oxidation, rust and the formation of sludge and residues; - excellent anti-wear power; - low odor; - low temperature of the machined pieces; -biodegradability; - maximum tolerability by operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It’s a neat lubricant for mechanical operations, free from mineral oil. It’s suitable for tapping, molding, deep drawing and blanking operations of high resistance alloy steel. Its components are: - Synthetic and natural biodegradable esters - Active/inactive sulfur compounds - Waxy additives - Antioxidants - Metallic passivators X-DRAW BIO 100 TF guarantees: - Absence of fumes and vapors during operation - High flash point for operations totally safe - Excellent fluidity even at low temperatures - Excellent wetting power making the dispersion of the oil fast and uniform over the treated pieces - Excellent releasing power - Excellent EP power for maximum quality finishes - Excellent oxidation and rust resistance - Excellent anti wear and anti-welding power The product is free from chlorinated compounds and it does not contain Polycyclic Aromatic Hydrocarbons (P.A.H.).

Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat lubricant free from mineral oil and made from refined synthetic and natural biodegradable esters mixed with sulfur compounds, greasy agents, antioxidants and metal passivators. It is especially formulated for drawing, deep drawing, fine blanking and tapping processes of alloy steel as well as cold drawing operations on steel and high-strength alloy and stainless steel. It guarantees: -abscence of fumes and mists during the processes -high flash point -excellent smoothness even at low temperatures and exceptional wetting power, allowing the lubricant to quickly and uniformly disperse on the metal surface -excellent greasing, EP and lubro-detaching power for quality finishes -excellent resistance to oxidation, rust, sludge and dry and sticky residues formations -good anti-wear power -light odour -low temperature of the machined pieces -biodegradability -maximum tolerability for the operators. The product is free from chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (PAHs).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is an oil for mechanical machining, neat, free of mineral oil, formulated for stamping, deep drawing, fine blanking and tapping of high strength and stainless steel alloys, when a product with a very high EP power is required. It consists of synthetic and natural biodegradable esters refined with an exclusive method, mixed with inactive sulfur compounds, with greasing agents, antioxidants and metal passivators, which, exerting a strong synergistic action between them, ensures: - absence of fumes and vapors being processed; -a high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, so that the oil disperses quickly and uniformly on the metal surface; - excellent greasing power, EP and lubricant-release agent for quality finishes; - excellent resistance to oxidation, rust and the formation of sludge and dry and sticky residues, thanks to a particular and exclusive formulation combination; -good anti-wear power; -low smell; - low temperature of the machined pieces; -biodegradability; -maximum tolerability by operators. The product is free of chlorinated compounds and does not contain Polycyclic Aromatic Hydrocarbons (IPA).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat oil for mechanical machining, free from mineral oil, formulated for tapping, stamping, deep-drawing, fine blanking, high-strength steels and stainless steel, when a product with an extremely high EP power is required and exclusive. It is constituted by biodegradable synthetic base esters in mixture with active/inactive sulphated compounds, untuosant, specific sulphorphic-phosphorous additives, antioxidants and metal passivators, which, by exerting a strong synerry action between them, specifically designed and effective, they guarantee: -Absence of fumes and the formation of vapours in production; -A high flash point for absolute safety operations; -Excellent smoothness even at low temperatures and an exceptional wetting power, so that the oil is dispersed on the metal surface quickly and evenly; -Excellent untuosant and lubro-releasing power and exceptional EP power for high quality finishes; -Excellent resistance to oxidation and rust; -Optimum anti-wear and anti-aging power; The product is free of chlorine and chlorinated compounds.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is an entire oil for mechanical processing, free from mineral oil, formulated for tapping, molding, drawing, fine shearing, high-strength and stainless steel steels, when a product is required with an exceptional EP power, extremely high and exclusive. It consists of synthetic and natural biodegradable esters, in a mixture with active / inactive sulfur compounds, unusant, specific sulfur additives, antioxidants and metal passivators, which, exercising with a strong synergistic action, specifically designed and effective, guarantee: - the absence of fumes and formations of vapors in progress; - a high point of flammability for operations in absolute safety; - Excellent smoothness even at low temperatures and an exceptional bathing power, so the oil disperses on the metal surface quickly and uniform; - Exceptional power and lubro-detaching power and exceptional EP power for top quality finishes; -Excellent resistance to oxidation and rust; - Extect wear and anti-soldering cutting. The product is chlorine and chlorinated compounds.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a whole cutting oil, free from mineral oil, formulated for tapping, stamping, deep-drawing, fine blanking, high-strength steels and stainless steel, when a product with an exceptionally high EP power is required. It consists of synthetic and natural biodegradable esters, refined with exclusive method, in mixture with active/inactive sulphated compounds, greased, specific sulphorphic-phosphorous additives, antioxidants and metal passivators, which, by exerting a strong synergy action, specifically studied and effective, guarantee: -No fumes and vapours in production; -A high flash point for absolute safety operations; -Excellent smoothness even at low temperatures and an exceptional wetting power, so that the oil is dispersed on the metal surface quickly and evenly; -Excellent untuosant and lubro-releasing power and exceptional EP power for high quality finishes; -Excellent resistance to oxidation and rust; -Excellent anti-wear and anti-shear power. The product is free of chlorine and chlorinated compounds.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat cutting oil, free from mineral oil, formulated for tapping, stamping, deep-drawing, fine blanking, high-strength steels and stainless steel, when a product with an extremely high and exclusive EP power is required. It consists of synthetic base esters in mixture with active/inactive sulphated compounds, untuosants, specific sulphorphic-phosphorous additives, antioxidants and metal passivators, which, by exerting a strong synerry action, specifically studied and effective. It ensures: -absence of fumes and formation of vapours in production; -high flash point for absolute safety operations; -excellent smoothness even at low temperatures and exceptional wetting power, so that the oil dissipates on the metal surface quickly and evenly; -excellent untuosant and lubro-releasing power and exceptional EP power for high quality finishes; -excellent resistance to oxidation and rust; -excellent anti-wear and anti-shear power. The product is free of chlorine and chlorinated compounds and does not contain Poycyclic Aromatic Hydrocarbon.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is an extremely viscous neat oil, formulated for molding, drawing, shearing, drawing, etc., of sheets, strips and bars in high-strength alloy steel and stainless steel, when a product with high EP power, anti-seize and release agent is required. , for very severe operations of forming parts with complex geometry. It is also suitable for processing non-ferrous materials such as copper alloys, aluminum alloys and titanium alloys. It consists of a blend of synthetic and natural biodegradable esters, refined with an exclusive method, with inactive sulfur compounds, which, exerting a strong synergistic action between them, guarantee: - very high greasing power and lubricating-release adhesive for quality finishes even in the presence of hard materials; - excellent resistance to oxidation, rust and the formation of sludge and dry and sticky residues, thanks to a particular and exclusive formulation combination; -excellent anti-wear power for the preservation of the molds; - absence of fumes and vapors in processing; - a high flash point for operations in absolute safety; - excellent smoothness even at low temperatures and exceptional wetting power, whereby the oil is dispersed on the metal surface quickly and uniformly; - low temperature of the machined pieces; - biodegradability; - maximum tolerability by the operators. The product is free from chlorinated compounds and does not contain polycyclic aromatic hydrocarbons (PAHs).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

X-DRAW BIO PASTE EP is a yellowish, washable, absolutely innovative paste, specifically developed for the molding and drawing operations of ferrous materials and steels, in particular when you want to replace the use of chlorine paraffins. It is in fact a product completely free of chlorine and chlorine derivatives, formulated with specific additives, which operate in a synergistic way and in absolute respect for the health of the operators. The exceptional lubricating-release power allows you to perform even heavy operations in absolute safety. It is easily removable by means of a slightly alkaline aqueous wash

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and blanking ferrous materials, particularly suitable for blanking and medium-heavy drawing operations, when particularly clean pieces are to be obtained. It is obtained from biodegradable base, vanishing, highly selected and hydrogenated, with a very moderate odor, mixed with additives consisting of: - synthetic greasing agents; - friction modifiers; - anticorrosives and antioxidants; - phosphorus compounds. These perform a synergistic action between them that allows you to obtain the following features: - excellent detaching-anti-welding power; - a particular strong protection against rust; - shiny surfaces; - durability of the molds and punches; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an ultra thin oily film on the pieces, almost imperceptible and stable over time, which has a protective action.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Biodegradable-based neat drawing oil

It is a neat multipurpose machining oil. It is very fluid and free from mineral oil. It has been designed for plastic deformation, steel plates and strips blanking and for chip removal operations, which employ minimal quantity lubrication systems. It is made of a synthetic biodegradable ester in combination with greasing, anti-oxidant additives and metallic passivators, which ensure exceptional performances by exerting a synergistic action one on each other. Features: - absence of fumes and vapours during the process; - high flash point for operations in complete safety; - excellent smoothness even at low temperatures and an outstanding wetting property, for which the oil disperses itself quickly and uniformly over the metallic surface; - excellent greasing and anti-welding property for high quality finishes; - good resistance to oxidation and rust; - good anti-wear property; - low temperatures of the processed pieces; - biodegradability; The product is free from zinc, chlorinated and sulphured compounds and does not contain any Polycyclic Aromatic Hydrocarbons (PAH).

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Drawing gel

X-DRAW GL 15 is a gel, specific for the bending of stainless steel pipes. Its special formulation, free from mineral oil and based on biodegradable synthetic esters, with cosmetic-derived additives, gives it excellent environmental and hygienic-sanitary compatibility characteristics. The product, after use, tends to dry leaving the pieces well cleaned and allowing to perform successive welding processes in the absence of fumes.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Drawing gel

X-DRAW GL 30 GF is a black gel, specifically for lamination and hot deformation processes. Its particular formulation, free from mineral oil and based on biodegradable synthetic esters, with specific EP additives, confers excellent environmental and hygienic-sanitary compatibility characteristics and minimizes the formation of mists and fumes in process. Thanks to the anti-wear and EP additives and to the solid sub-micronized graphite lubricants contained in it, which together exert an exclusive and particularly effective synerloptic action at high temperature, the product presents an exceptional power no welded and releasing agent, for high quality surface finishes. After use, it tends to dry, leaving the pieces slightly protected by a soft film with slightly passivating properties of corrosion. This film can be removed with a light flow of water.

Prodotto ECO
Family: Forming and Drawing Lubricants
Type: Drawing gel

X-DRAW GL SG is a specially designed gel for bending stainless steel pipes. Its special formulation, free from mineral oil and based on biodegradable synthetic esters, with additives also derived from cosmetics, confers excellent environmental and hygienic-sanitary compatibility characteristics. Thanks to the anti-wear and EP additives contained in it, which together exert an exclusive synerloptic action, the product presents an excellent anti-aging and releasing power. It is equipped, in particular, with a marked untuding and gliding power that favours: -Easy and smooth sliding of the material; -the reduction of friction and the protection from wear; -Top quality surface finishes. The product, after use, tends to dry, leaving the pieces well cleaned and allowing to perform the subsequent welding processes in the absence of fumes.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is an oil designed for drawing and blanking operations on ferrous materials, indicated for medium and heavy-duty blanking and deep drawing processes, whenever the intention is to obtain particularly clean pieces. It is made from a higly selected and hydrogenated fluid mineral base, quickly evaporable, of moderate odour and mixed with additives composed of: - Synthetic lubricant part; - friction modifiers; - anti-corrosive and anti-oxidant; - phosphorated compunds. These elements are characterized by great synergy among each others, which makes it possible for the product to guarantee: - Excellent release and anti-welding power; - shiny surfaces; - durability of the moulds and of the pieces; - light odour; - hygenic and sanitary compatibility. After the evaporation of the volatile component, the product leaves on the machined piece an oily film almost unnoticeable and stable over times.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant for drawing and blanking processes on ferrous and non-ferrous materials, particularly suitable for blanking and light deep drawing operations, whenever particularly clean pieces are required. It is made from a highly selected and hydrogenated, fluid, vanishing mineral base, with a very moderate odor and mixed with additives consisting of: - synthetic greasing agents; - friction modifiers; - anti-corrosive and anti-oxidants. These exert a synergistic action among each others which allows to obtain the following properties: - excellent detaching and anti-welding power; - shiny surfaces; - prolonged life of the moulds and punches; - excellent surface finish of the machined pieces; - low odors; - hygienic-sanitary compatibility. The product is particularly suitable in case of subsequent high-temperature treatments on the machined pieces (braze welding, heat treatment, etc.), as it leaves neither residues nor burnishings or stains. After the evaporation of the volatile part, the product leaves an ultra-thin oily film on the pieces, almost imperceptible and stable over time, which exerts a protective action.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for drawing and blanking processes of ferrous and non-ferrous materials, especially suitable for blanking and light deep drawing, whenever the aim is to obtain particularly clean pieces. It is obtained from a highly selected and hydrogenated fluid, evaporable mineral base, with a very moderate odor and mixed with additives consisting of: -synthetic greasing agents; -friction modifiers; -anti-corrosives and antioxidants. These perform a synergistic action among themselves which allows the product to ensure: -excellent release and anti-welding power; -shiny surfaces; -life of the molds; -excellent finishing of the edges of the machined pieces; -low odors; -hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an ultra-thin oily film on the pieces, almost imperceptible and stable over time, which exerts a protective action. X-DRAW V 6210 is perfectly compatible with all the treatments following the processing phase.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and blanking of ferrous materials, particularly suitable for light blanking and drawing operations, when you want to obtain particularly clean pieces. It is obtained from a fluid, evaporable, highly selected and hydrogenated mineral base, with a very moderate odor, mixed with additives consisting of: - greasing agents of natural origin; - friction modifiers; - anti-corrosion and antioxidants. These exert a synergic action between them which allows to obtain a product which guarantees: - excellent release-anti-welding power; - surface shine; - life of molds and pieces; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an almost imperceptible oily film on the piece, stable over time.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

t is an evaporable fluid to be used for stamping and shearing of Aluminum sheets, particularly suitable for blanking, light drawing when you want to obtain particularly clean pieces. It is obtained from a highly selected evaporable and hydrogenated fluid mineral base. The product has: - an excellent release anti-welding power; - surface gloss; - duration of the molds and pieces; - low odors; - a high coefficient of oil distribution on the plate, for optimization of consumption in the g/cm² ratio and for simultaneous improvement of the surface quality of the plates work; - excellent hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a lubricant for drawing and blanking processes of ferrous and non-ferrous materials, especially designed for blanking and medium and heavy-duty drawing processes whenever the aim is to obtain particularly clean pieces. It is made from a highly selected and hydrogenated vanishing mineral fluid, of very moderate odour mixed with additives, constituted by: -Synthetic components; -Friction modifiers; -Anti-corrosive and anti-oxidants. -Specific EP additives for drawing and blanking processes These exert among each others a synergic action, which allows the product to guarantee: -Excellent anti-welding and release power; -Excellent resistance to residues formations; -Shiny surfaces; -Greater lifetime of the moulds and pieces; -Light odour; -Hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for stamping and cutting of ferrous and non-ferrous materials, particularly suitable for deep stamping thanks to the excellent EP power as well as for medium-light stamping and drawing processes, when particularly clean pieces are to be obtained. It is obtained from a fluid, evaporable, highly selected and hydrogenated mineral base, with a very moderate odor, mixed with additives consisting of: - natural and synthetic greases; - specific EP additives to increase cutting and deformation power; - friction modifiers; - anticorrosives and antioxidants. These perform a synergic action between them that allows to obtain a product that guarantees: - excellent release-anti-welding power; - excellent resistance to the formation of residues; - surface gloss; - duration of molds and punches; - low odors; - hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is an oil to be used for drawing and blanking processes of ferrous and non-ferrous materials, particularly designed for drawing operations, thanks to its great EP power, but also for blanking and light-medium deep drawing processes, whenever the aim is to obtain especially clean pieces. It is made from a higly selected and hydrogenated vanishing fluid mineral base, of moderate odor and mixed with additives consisting of: - Lubricant part of synthetic and natural origin; - Specific EP additives to increase the cutting and deformation power; - Friction modifiers; - Anti-corrosive and anti-oxidant. These elements are characterized by great synergy among each others, which makes it possible for the product to guarantee: - Excellent release and anti-welding power; - Great resistance to the formation of residues; - Shiny surfaces; - Durability of the moulds and the punches; - Light odors; - Hygenic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for molding and blanking of ferrous and non-ferrous materials, particularly suitable for blanking and light drawing, when you want to obtain particularly clean pieces. It is obtained from a highly selected and hydrogenated fluid, evaporable mineral base, with a very moderate odor, mixed with additives consisting of: -synthetic greasing agents; - friction modifiers; -anti-corrosives and antioxidants. These perform a synergistic action between themselves that allows for a product that ensures: - excellent detaching-antisoldering power; - surface gloss; -life of the molds; - excellent finishing of the edges of the machined pieces; - low odors; - hygienic-sanitary compatibility. After the evaporation of the volatile part, the product leaves an ultra-thin oily film on the pieces, almost imperceptible and stable over time, which exerts a protective action. X-DRAW V 6230 is perfectly compatible with all treatments following the processing phase.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is a fluid to be used for drawing and blanking of ferrous and non-ferrous metals, containing chloroparaffins, particularly suitable for blanking and drawing, even very heavy, when you want to obtain particularly clean pieces. It is obtained from a highly selected and hydrogenated fluid, evaporable, highly selected and hydrogenated mineral base with a very moderate odor, mixed with additives consisting of: - synthetic lubricants; - friction modifiers; - EP and chloroparaffin polymeric additives with high anti-welding and stability properties. These perform a synergistic action between themselves that allows for a product that ensures: - an excellent detaching-antisoldering power; - excellent resistance to the formation of residues; - surface gloss; - duration of molds and pieces; - low odors; - hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Drawing vanishing fluid

It is an evaporable fluid to be used for medium-light molding and shearing operations of ferrous and non-ferrous materials and in particular of light drawing and shearing of aluminum sheets, especially when you want to obtain particularly clean finished parts. It is obtained from a very fluid, evaporable, hydrogenated hydrocarbon base, characterized by a very high degree of purity and very moderate odor, with oily additives, friction and anti-wear modifiers, anticorrosive and antioxidants. It provides: - excellent detaching-anti-sealing power; - surface gloss; -excellent anti-wear power, for a long life of the molds and high quality finishes; - low odors; - optimization of consumption in the g / cm² ratio and of the surface quality of the processed sheets, thanks to a high oil distribution coefficient, which disperses quickly and uniformly on the metal surface; - excellent hygienic-sanitary compatibility.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is an oil for extrusion of ferrous metals consisting of a highly selected mineral base and additives for Extreme Pressures (E.P.) based on active and inactive sulphur compounds, sulphophosphates and lubricants that exert an exclusive and effective synergistic effect. It is free of chlorinated compounds and contains anti-corrosion, anti-wear and antioxidant agents. It shall ensure: -Long duration of the oil charge without formation of slurries, residues, lacquers, varnishes, etc; -Low smoke; -A very moderate odor in processing; -An excellent EP power and detachment.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is an oil for extrusion of ferrous metals consisting of a highly selected mineral base and additives for Extreme Pressures (E.P.) based on active and inactive sulphur compounds, sulphophosphates and lubricants that exert an exclusive and effective synergistic effect. It is free of chlorinated compounds and contains anti-corrosion, anti-wear and antioxidant agents. It shall ensure: -Long duration of the oil charge without formation of slurries, residues, lacquers, varnishes, etc; -Low smoke; -A very moderate odor in processing; -An excellent EP power and detachment.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is an oil for extrusion of ferrous metals consisting of a highly selected mineral based oil and additives for extreme pressures based on active and inactive sulphuric compounds, sulphhospphosphorates and untuosants, which exert an effective synergical effect. It is free of chlorinated compounds and contains anticorrosive agents and Antioxidants. Guarantees: -prolonged duration of oil charge without formation of sludge, residues, lacquers, paints, etc. -a very Low smokiness -a very moderate smell in working -excellent EP and releasing power

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is an oil for extrusion of ferrous metals, consisting of a highly selected mineral base and additives for extreme pressures (E.P.) based on active and inactive sulphates, sulphhospphosphorates and untuosants, which exert an exclusive and effective Synergic Effect. It is free of chlorinated compounds and contains anticorrosive agents and antioxidants. Guarantees: -prolonged duration of oil charge without formation of sludge, residues, lacquers, paints, etc. -a Very Low Smokiness. -a very moderate smell in the process. -excellent EP and Release power.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is an oil for extrusion of ferrous metals consisting of a highly selected paraffinic mineral base with additives for Extreme Pressures based on active and inactive sulphur compounds, phosphates and lubricants which exert an effective synergistic effect. It is free of chlorinated compounds and contains anti-corrosive agents, antioxidants and metal passivators. It shall ensure: - a long service life of the oil without formation of slurries, residues, lacquers, varnishes, etc.; - a high flash point; - a very low tendency to the formation of fumes and mists; - a very moderate odour during processing; - an excellent EP, detachable and anti-welding power.

Family: Forming and Drawing Lubricants
Type: Neat drawing oil

It is a lubricating oil for molding and shearing, formulated in particular for the lubrication of carbon and stainless steel wire in the forming of springs. It is relatively viscous and very particular, consisting of a complex mixture of: - high molecular weight synthetic esters, with marked viscoelastic properties of resistance to loads; - sulpho-phosphorated antiwear and anticorrosive additives; - an exclusive combination of active sulfur compounds; - antioxidant and antirust additives with high passivating power of metal surfaces, which guarantee long-lasting protection; - very finely dispersed and stabilized colloidal graphite; - a VOC (Volatile Organic Compounds) free hydrocarbon solvent, which keeps the product in chemical-physical equilibrium and which, after evaporation, leaves on the metal surfaces a thin lubricating and protective film, strongly adhesive and effective and in any case removable with petroleum solvents. The result is a product that has the following characteristics: - an exceptional anti-welding power and E.P. of resistance to loads, even the heaviest ones, and to Extreme Pressures, obtained from the formulation synergy of the components used, in particular of newly designed wear reducing additives, for surface finishes of maximum brightness; - an excellent hiding-passivating power, for the protection of the machined pieces during subsequent storage.

Family: Forming and Drawing Lubricants
Type: Special product

X-ROLL 8401 (EXPORT ONLY) is a lubricant preparation with lubricant ester based additives mixed with solvent. The preparation is odourless, colorless, de-aromatized and desulfurized suitable for cold rolling of aluminium. It guarantees the following advantages: - desulphurised and dearomatised product; - good finish; - no residues or stains; - compatibility with the rolling process.